聚乙烯微孔塑料研究进展

doi:10.19491/j.issn.1001-9278.2019.01.022

中国塑料 ›› 2019, Vol. 33 ›› Issue (1): 124-132.DOI: 10.19491/j.issn.1001-9278.2019.01.022

聚乙烯微孔塑料研究进展

谭逸伦,陈迎新,李俊祥

上海科明传输技术有限公司

收稿日期:2018-09-19 修回日期:2018-10-16 出版日期:2019-01-26 发布日期:2019-02-25

Research Progress in Polyethylene Microcellular Foams

Received:2018-09-19 Revised:2018-10-16 Online:2019-01-26 Published:2019-02-25

摘要/Abstract

摘要： 综述了包括溶解扩散过程、流变特性、泡孔成核生长过程等聚乙烯微孔塑料制备过程中的基础理论及研究进展。并以应用于绝缘介质材料为例，从选材到泡孔控制提出了提高其使用性能的建议。

谭逸伦陈迎新李俊祥. 聚乙烯微孔塑料研究进展[J]. 中国塑料, 2019, 33(1): 124-132.

[1]C.G. MUNTERS, J. G. TANDBERG.Heat Insulation: U.S., 2023204 [P]. 1935-12-03. [2]S. LEE, C. B. PARK, N. S. RAMESH.Polymeric Foams: Technology and Science [M]. Boca Raton: Taylor & Francis Group, 2007. [3]J. E. MARTINI.The production and analysis of microcellular foam [D]. Boston; Massachusetts Institute of Technology, 1981. [4]陈国华, 彭玉成.国外微孔塑料物理发泡研究现状[J].中国塑料, 1998, 12(1):15-21 [5]D. F. BALDWIN,CB. PARK,N. P. SUH.An Extrusion System for the Processing of Microcellular Polymer Sheets: Shaping and Cell Growth Control[J].POLYMER ENGINEEMNG AND SCIENCE, 1996, 36(10):1425-1435 [6]N. J. MILLS.Polymer Foams Handbook:Engineering and Biomechanics Applications and Design Guide [M]. Oxford: Butterworth-Heinemann, 2007. [7]徐冬梅, 冯绍华, 黄兆阁等.聚乙烯挤出发泡的研究[J].齐鲁石油化工, 2006, 34(3):267-269 [8]张鹰, 郑安呐, 韩哲文.微孔发泡塑料的研究进展[J].功能高分子学报, 1999, 12(2):207-210 [9]陈怡.微孔塑料连续挤出的机理研究及装备 [D]. 成都; 四川大学, 2006. [10]李开林, 彭玉成, 颜家华.微孔塑料及其挤出成型技术[J].工程塑料应用, 1998, 26(7):13-15 [11]杨中林, 周持兴, 林周进等.影响物理发泡绝缘熔体强度的因素[J].光纤与电缆及其应用技术, 2008, -(5):13-16 [12]C. VASILE, M. PASCU.Practical Guide Polyethylene [M]. Shawbury: Rapra Technology Limited, 2005. [13]J. S. COLTON,NP. SUH.The Nucleation of Microcellular Thermoplastic Foam With Additives: Part I: Theoretical Considerations[J].POLYMER ENGINEEMNG AND SCIENCE, 1987, 27(7):485-492 [14]R.B. MCCLURG.Design criteria for ideal foam nucleating agents[J].Chemical Engineering Science, 2004, 59(24):5779-5786 [15]余海涛, 雷雅杰, 王宪忠等.微孔发泡塑料中成核剂的研究[J].中国塑料, 2015, 29(7):72-79 [16]L. CHEN, K. BLIZARD, R. STRAFF, et al..Effect of Filler Size on Cell Nucleation during Foaming Process[J].JOURNAL OF CELLULAR PLASTICS, 2002, 38(2):139-148 [17]高峰, 万辰, 刘涛等.共混物超临界挤出发泡成核剂的优选[J].高分子材料科学与工程, 2016, 32(12):104-108 [18]陈浩, 赵景左, 刘娟等.泡沫塑料发泡剂的现状及展望[J].塑料科技, 2009, 37(2):68-72 [19]王进, 程兴国, 袁明君等.超临界CO2在微孔聚合物制备中的应用[J].高分子通报, 2001, -(6):8-17 [20]R. GENDRON, M. F. CHAMPAGNE, Y. DELAVIZ, et al..Foaming Polystyrene with a Mixture of CO2 and Ethanol[J].Journal of Cellular Plastics, 2006, 42(2):127-138 [21]C. VACHON,RGENDRON.Foaming Polystyrene with Mixtures of Carbon Dioxide and HFC-134a[J].Cellular Polymers, 2003, 22(2):75-88 [22]E. D. MAIO,GMENSITIERI,S. IANNACE,et al..Structure Optimization of Polycaprolactone Foams by Using Mixtures of CO2 and N2 as Blowing Agents[J].POLYMER ENGINEERING AND SCIENCE, 2005, 45(3):432-441 [23]M. WANG, Y. SATO, T. IKETANI, et al..Solubility of HFC-134a, HCFC-142b, butane, and isobutane in low-density polyethylene at temperatures from 383.15 to 473.15 K and at pressures up to 3.4 MPa[J].Fluid Phase Equilibria, 2005, 232(1):1-8 [24]S. AREERAT,EFUNAMI,Y. HAYATA,et al..Measurement and Prediction of Diffusion Coefficients of Supercritical CO2 in Molten Polymers[J].POLYMER ENGINEERING AND SCIENCE, 2004, 44(10):1915-1924 [25]Y. SATO, K. FUJIWARA, T. TAKIKAWA, et al..Solubilities and diffusion coefficients of carbon dioxide and nitrogen in polypropylene, high-density polyethylene, and polystyrene under high pressures and temperatures[J].Fluid Phase Equilibria, 1999, 162(1-2):261-276 [26]傅志红, 王洪, 彭玉成.微孔塑料成型过程中进气流量的确定[J].中国塑料, 2002, 16(8):78-80 [27]吴晓丹, 彭玉成, 蔡业彬.超临界在聚合物中的溶解度和扩散性研究[J].中国塑料, 2005, 19(7):59-63 [28]P. L. DURRILL,RG. GRISKEY.Diffusion and Solution of Gases into Thermally Softened or Molten Polymers: Part Ⅱ. Relation of Diffusivities and Solubilities with Temperature Pressure and Structural Characteristics[J].AlChE Journal, 1969, 15(1):106-110 [29]Q. ZHANG, M. XANTHOS, S. K. DEY.Dissolution of Atmospheric Gases in Polystyrene Melt in Single and Twin-Screw Foaming Extruders[J].JOURNAL OF CELLULAR PLASTICS, 2001, 37(6):537-545 [30]C. D. HAN, C.-Y. MA.Rheological Properties of Mixtures of Molten Polymer and Fluorocarbon Blowing Agent. I. Mixtures of Low-Density Polyethylene and Fluorocarbon Blowing Agent[J].Journal of Applied Polymer Science, 1983, 28(2):831-850 [31]R. GENDRON, M. F. CHAMPAGNE.Effect of Physical Foaming Agents on the Viscosity of Various Polyolefin Resins[J].JOURNAL OF CELLULAR PLASTICS, 2004, 40(2):131-143 [32]S. AREERAT,TNAGATA,M. OHSHIMA..Measurement and Prediction of LDPECO2 Solution Viscosity[J].POLYMER ENGINEEMNG AND SCIENCE, 2002, 42(11):2234-2245 [33]C. WAN, G. SUN, T. LIU, et al..Rheological Properties of HDPE and LDPE at the Low-Frequency Range Under Supercritical CO2[J].The Journal of Supercritical Fluids, 2017, 123(-):67-75 [34]S.-T. LEE, C. B. PARK..Foam Extrusion: Principles and Practice, Second Edition [M]. Boca Raton: CRC Press, 2014. [35]M. BLANDER,JL. KATZ..Bubble nucleation in liquids[J].AIChE Journal, 1975, 21(5):833-848 [36]S. T. LEE.Shear Effects on Thermoplastic Foam Nucleation[J].POLYMER ENGINEEMNG AND SCIENCE, 1993, 33(7):418-422 [37]W.ZHAI,JYU,J. HE.Ultrasonic irradiation enhanced cell nucleation: An effective approach to microcellular foams of both high cell density and expansion ratio[J].Polymer, 2008, 49(10):2430-2434 [38]J. S. COLTON,NP. SUH.Nucleation of Microcellular Foam: Theory and Practice[J].POLYMER ENGINEEMNG AND SCIENCE, 1987, 27(7):500-503 [39]S. N. LEUNG,CB. PARK,H. LI.Numerical simulation of polymeric foaming processes using modified nucleation theory[J].Plastics, Rubber and Composites, 2006, 35(3):93-100 [40]K. TAKI.Experimental and numerical studies on the effects of pressure release rate on number density of bubbles and bubble growth in a polymeric foaming process[J].Chemical Engineering Science, 2008, 63(14):3643-3653 [41]A. AREFMANESH,SG. ADVANI.Nonisothermal Bubble Growth in Polymeric Foams[J].POLYMER ENGINEEMNG AND SCIENCE, 1995, 35(3):252-260 [42]M. AMON,CD. DENSON.A Study of the Dynamics of Foam Growth: Analysis of the Growth of Closely Spaced Spherical Bubbles[J].POLYMER ENGINEERING AND SCIENCE, 1984, 24(13):1026-1034 [43]N. S. RAMESH,DH. FUSMUSSEN,G. A. CAMPBELL.Numerical and Experimental Studies of Bubble Growth During the Microcellular Foaming Process[J].POLYMER ENGINEEMNG AND SCIENCE, 1991, 31(23):1657-1664 [44]S. N. LEUNG, C. B. PARK, D. XU, et al. .Computer Simulation of Bubble-Growth Phenomena in Foaming[J].Industry and Engineering Chemistry Research, 2006, 45(23):7823-7831 [45]N. S. RAMESH, N. MALWITZ.A Non-Isothermal Model to Study the Influence of Blowing Agent Concentration on Polymer Viscosity and Gas Diffusivity in Thermoplastic Foam Extrusion[J].JOURNAL OF CELLULAR PLASTICS, 1999, 35(3):199-209 [46]S. L. EVERITT, O. G. HARLEN, H. J. WILSON, et al..Bubble dynamics in viscoelastic fluids with application to reacting and non-reacting polymer foams[J].Journal of Non-Newtonian Fluid Mechanics, 2003, 114(2):83-107 [47]Y. CHEN, C. WAN, T. LIU, et al..Evaluation of LLDPE/LDPE blend foamability by in situ rheological measurements and bubble growth simulations[J].Chemical Engineering Science, 2018, 192(-):488-498 [48]B. A. RODEHEAVER, J. S. COLTON.Open-Celled Microcellular Thermoplastic Foam[J].POLYMER ENGINEERING AND SCIENCE, 2001, 41(3):380-400 [49]K. TAKI,KTABATA,S.-I. KIHARA,et al..Bubble Coalescence in Foaming Process of Polymers[J].POLYMER ENGINEERING AND SCIENCE, 2006, 46(5):680-690 [50]M. YAMAGUCHI, K.-I. SUZUKI.Rheological Properties and Foam Processability for Blends of Linear and Crosslinked Polyethylenes[J].Journal of Polymer Science: Part B: Polymer Physics, 2001, 39(18):2159-2167 [51]S. DOROUDIANI,CB. PARK,M. T. KORTSCHOT..Effect of the Crystallinity and Morphology on the Microcellular Foam Structure of Semicrystalline Polymers[J].POLYMER ENGINEEMNG AND SCIENCE, 1996, 36(21):2645-2662 [52]万辰.超临界CO2环境下聚乙稀的流变特性及其影响发泡行为的作用机制 [D]. 上海; 华东理工大学, 2017. [53]杨慧丽, 徐俊, 姚占海等.聚乙烯泡沫塑料物理性能的研究[J].高分子材料科学与工程, 1997, 13(S1):75-78

聚乙烯微孔塑料研究进展

Research Progress in Polyethylene Microcellular Foams

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 0

编辑推荐

Metrics

本文评价