滚动过程中聚四氟乙烯、聚酰胺66、聚醚型聚氨酯的弹性滞后效应与本构关系的研究

doi:10.19491/j.issn.1001-9278.2018.03.016

中国塑料 ›› 2018, Vol. 32 ›› Issue (03): 99-103.DOI: 10.19491/j.issn.1001-9278.2018.03.016

滚动过程中聚四氟乙烯、聚酰胺66、聚醚型聚氨酯的弹性滞后效应与本构关系的研究

黄传辉,王前,张磊,陆兴华

徐州工程学院

收稿日期:2017-08-15 修回日期:2017-11-03 出版日期:2018-03-26 发布日期:2018-04-26
基金资助:
人工关节植入体运动和固定界面的生物摩擦腐蚀耦合行为研究;高速重载工程机械用高精度多路换向阀的关键技术研发

Elastic Hysteric Effect and Constitutive Model of PTFE, PA66 and Polyester-type TPU Under Rolling Contact

Received:2017-08-15 Revised:2017-11-03 Online:2018-03-26 Published:2018-04-26

摘要/Abstract

摘要： 基于标准线性固体本构模型，从弹性滞后效应的角度推导了滚动摩擦系数的表达式。利用试验机、轮廓摩擦磨损仪考察了聚四氟乙烯（PTFE）、聚酰胺66(PA66)、聚醚型聚氨酯（PEUR）的蠕变、松驰行为，求出相关参数；在滚动摩擦实验台上考察了PTFE、PA66和PEUR等塑料轮子与铸铁HT200配副在不同载荷、速度下的滚动摩擦行为，讨论了材料的黏弹性与滚动摩擦系数间的耦合关系。结果表明,3种聚合物试样的滚动摩擦系数均随速度的增加而增大；相同实验条件下，PEUR、PA66和PTFE的滚动摩擦系数比约为1.12∶1.02∶1；理论计算结果与实验数据相一致，表明弹性滞后效应是塑料滚动过程中摩擦阻抗的主要来源。

Abstract: The rolling friction coefficient was theoretically deduced from the elastic hysteric effect according to the standard linear solid model. The static creep and relaxation characteristics of PTFE, PA66 and polyester-type TPU(PEUR) was evaluated by a CETR UMT-2 type equipment and an LKDM-2000 tester, and their rolling friction behavior under different loads and velocities was investigated by a rolling friction testing equipment. The coupling relationship between the viscoelasticity and rolling friction coefficient was discussed through a comparison between experimentals data and theoretical results. The results indicated that the rolling friction coefficient of the three polymers increased with an increase of the rolling velocities. The ratio of rolling friction coefficient for PEUR, PA66 and PTFE was 1.12∶1.02∶1 under the same experimental condition. The theoretical data of the rolling friction coefficient were consistent with the experimental results, indicating that the friction resistance force was mainly originated from the elastic hysteresis effect.

黄传辉王前张磊陆兴华. 滚动过程中聚四氟乙烯、聚酰胺66、聚醚型聚氨酯的弹性滞后效应与本构关系的研究[J]. 中国塑料, 2018, 32(03): 99-103.

参考文献

[1] 赵子亮,王庆年,李杰,李幼德,初亮. 基于滚动状态轮胎温度场的稳态热分析[J]. 机械工程学报, 2001, 37(5):30-34.
Zhao Ziliang,Wang Qingnian,Li Jie,Li Youde,Chu Liang. STEADY STATE THERMAL ANALYSIS ON TEMPERATURE FIELD OF TIRE BASED ON ROLLING STATE[J]. CHINESE JOURNAL OF MECHANICAL ENGINEERING, 2001, 37(5):30-34.
[2] Bijak-Zochowski.Marek, Marek.Piotr. Residual stress in some elasto-plastic problems of rolling contact with friction[J]. International Journal of Mechanical Sciences, 1997, 39(1):15-32.
[3] Chen.Y.K, Modi.O.P, Mhay.A.S, etal. The effect of different metallic counterface materials and different surface treatments on the wear and friction of polyamide 66 and its composite in rolling-sliding contact [J]. Wear, 2003, 255(1-6): 714-721.
[4] 全永昕. 工程摩擦学[M]. 杭州：浙江大学出版社, 1994.
Quan Y X. Engineering tribology[M]. Hangzhou: Zhejiang University Press，1994.
[5] Yin H S,Hu Y S,Zhang H,et al. Truck tire thermal-mechanical FEA and DMA with application to endurance evaluation[J]. Tire Science and Technology, 2006, 34(4):220-236.
[6] Shigeo Shimizu. Fatigue limit concept and life prediction model for rolling contact machine elements[J]. Tribology Tramsactions, 2002, 45:39-46.
[7] 龚科家,危银涛,叶进雄. 基于热力学有限元分析的轮胎滚动阻力仿真[J]. 中国机械工程, 2009, 20(5):626-629.
Gong Kejia,Wei Tintao, Ye Jinxiong. Simulation Techniques of Tire Rolling Resistance Based on Thermal- mechanical FEA[J]. China Mechanical Engineering, 2009, 20(5):626-629.
[8] Jiang Xiaoyu，Jin Xuesong． Numerical simulation of wheel rolling over rail at high- speeds[J]．Wear，2007，262：666-671．
[9] 王文健,郭俊,刘启跃. 接触应力对轮轨材料滚动摩擦磨损性能影响[J]. 摩擦学学报,2011,31(4) : 352-356.
Wang W J,Guo J,Liu Q Y. Effect of contact stress on rolling friction and wear behavior of wheel-rail materials[J]. Tribology,2011,31 ( 4) : 352-356.
[10] Ekh M，Johansson A，Thorberntsson H，et al． Models for cyclic ratcheting plasticity- integration and calibration[J]．ASME Journal of Engeering Matererials and Technology，2000，122：49-55．
[11] Ringsberg J W，Loo-Morrey M，Josefson B L，et al．Prediction of fatigue crack initiation for rolling contact fatigue[J]． International Journal of Fatigue，2000，22：205-215．
[12] Akama Makoto．Development of finite element model for analysis of rolling contact fatigue cracks in wheel/rail systems[J]．QR of RTRI，2007，48(1)：8-14．
[13] Liu Yongming，Liu Liming，Mahadevan Sankaran． Analysis of subsurface crack propagation under rolling cantact loading in railroad wheels using FEM[J]． Engineering Fracture Mechanics，2007，74：2659-2674．
[14] K.L.Johnson.徐秉业等译. 接触力学[M]. 北京：高等教育出版社, 1992.
K.L.Johnson. Contact Mechanics[M]. Translated by Xu Bingye. Beijing: Higher Education Press, 1992.

滚动过程中聚四氟乙烯、聚酰胺66、聚醚型聚氨酯的弹性滞后效应与本构关系的研究

Elastic Hysteric Effect and Constitutive Model of PTFE, PA66 and Polyester-type TPU Under Rolling Contact

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 0

编辑推荐

Metrics

本文评价