中国塑料 ›› 2019, Vol. 33 ›› Issue (2): 52-56,68.DOI: 10.19491/j.issn.1001-9278.2019.02.010

• 加工与应用 • 上一篇    下一篇

聚苯乙烯多孔吸附微球的制备

顾玥1,段成1,杜中杰1,2,张秀生3,张晨1,2*   

  1. 1. 北京化工大学材料科学与工程学院
    2. 北京化工大学常州先进材料研究院 3. 北京中科太康科技有限公司
  • 收稿日期:2018-08-29 修回日期:2018-10-25 出版日期:2019-02-26 发布日期:2019-03-26

Preparation and Performance of Porous Polystyrene Microspheres for Adsorption

  • Received:2018-08-29 Revised:2018-10-25 Online:2019-02-26 Published:2019-03-26

摘要: 通过悬浮聚合和超交联两步法合成了具有介孔结构的改性聚苯乙烯微球用作血液净化材料。首先采用悬浮聚合法制备了亲水改性的苯乙烯马来酸酐共聚微球(MPPS),然后将MPPS微球以二氯甲烷为溶剂、无水氯化铝为催化剂进行后交联处理,制备了含有介孔结构的、具有较高比表面积的聚苯乙烯(HCLPS)多孔微球。采用比表面积测试、扫描电子显微镜、傅里叶红外光谱、X射线光电子能谱等仪器分析表征了微球的结构和形貌,并测试了HCLPS微球的吸水性和戊巴比妥钠吸附性能。结果表明,超交联反应可以显著提高微球的比表面积,并且随着马来酸酐(MAH)含量增加,微球的吸水性和戊巴比妥钠吸附性能提高;当MAH含量为20 %(质量分数,下同)时HCLPS微球的戊巴比妥钠吸附率为91.90 %。

Abstract: The polystyrene (PS) microspheres with a micro-mesoporous structure were synthesized by suspension copolymerization using maleic anhydride (MAH) as a comonomer, followed by a hyper-crosslinking reaction using dichloromethane as a crosslinking agent and anhydrous aluminum chloride as a catalyst. The resultant PS microspheres were further characterized to determine their chemical structure and morphology by specific surface area test, scanning electron microscopy, Fourier-transform infrared spectroscopy and X-ray photoelectron spectroscopy. Moreover, the water absorption and pentobarbital adsorption performance of the microspheres were measured. The results indicated that the specific surface area of the microspheres was significantly improved by the hyper-crosslinking reaction. The water absorption and pentobarbitol adsorption performance were also enhanced with an increase of MAH content. The microspheres achieved a maximum pentobarbital adsorption capacity of 91.90 % at the MAH content of 20 wt%.