[1]Knights M.Water injection Molding Makes Hollow Parts Faster,Lighter[J].Plastics Technology, 2002, 48(4):42-47[2]Sannen S, Puyvelde P, Keyzer J.Defect Occurrence in Water‐Assisted Injection‐Molded Products: Definition and Responsible Formation Mechanisms[J].Advances in Polymer Technology, 2015, 34(1):701-708[3]陈英龙, 周华, 张增猛, 等.水辅与气辅成型残余壁厚的对比研究[J].中国塑料, 2012, 26(6):71-75[4] Oliveira D, Mateus A, Carreira P, et al.Water Assisted Injection Molding for Single and Multi-branched Tubular Components[J][J].Procedia Manufacturing, 2017, 12:141-149[5]KUANG T, YU C, XU B, et al.Experimental study of penetration interfaces in the overflow fluid-assisted co-injection molding process[J].Journal of Polymer Engineering, 2016, 36(2):139-148[6]张伟, 柳和生, 余忠, 等.水辅助注射成型制品质量的缺陷及工艺优化研究概述[J].中国塑料, 2018, 32(4):12-17[7]YANG J G, ZHOU X H, NIU Q.Model and simulation of water penetration in water-assisted injection molding[J].International Journal of Advanced Manufacturing Technology, 2013, 67(1-4):367-375[8]Knights M.Water injection: It's all coming together[J].Plastics Technology, 2005, 51(9):54-61[9]熊爱华, 柳和生, 黄兴元.新型注射成型技术——水辅助注射成型[J].塑料, 2009, 38(05):41-44[10]汪志泳, 黄汉雄, 汪斌.水辅助注塑中高压水穿透过程的数值模拟[J].化工学报, 2013, 64,(04):43-48[11]章凯, 匡唐清, 柳和生.注水压力对圆管件水辅注塑填充过程的影响[J].高分子材料科学与工程, 2016, 32(6):113-117[12]匡唐清, 邓洋, 余春丛.溢流法水辅注塑中注水参数对水穿透的影响分析[J].中国塑料, 2014, 28(7):102-105[13]Yang J G, Zhou X H, Luo G P.Study of water penetration length and processing parameters optimization in water-assisted injection molding[J].International Journal of Advanced Manufacturing Technology, 2013, 69(9-12):2605-2612[14]Huang Han-Xiong, Zhou Run-Heng, Yang Can.Fiber orientation propelled by high-pressure water penetration in water-assisted injection molded fiber-reinforced thermoplastics part[J].Journal of Composite Materials, 2013, 47(2):183-190[15]匡唐清, 邓洋.注水参数对水辅助注射成型充填过程影响的数值模拟[J].中国塑料, 2014, 28(2):102-106 |