[1]张克惠.塑料材料学[M].西安:西北工业大学出版社,2000:113-121. [2]郑伟,王金秀,郑弘博 PC在电器附件行业中的应力开裂问题和解决方案[J].日用 电器,2017,1:34-37,45. Zheng W, Wang J X, Zheng H B.Stress Cracking Problems and Solutions of PC in the Electrical Appliances Industry [J] .Electrical Appliances, 2017,1:34-37,45. [3]葛勇,王韬,郎建林等.注射成型塑化过程对聚碳酸酯性能的影响[J].高分子材料科 学与工程,2017,6:113-118. Ge Y,Wang T,Lang J L, et al.Effect of Injection Molding Plasticizing Process on the Properties of Polycarbonate[J].Polymer Materials Science & Engineering,2017,6:113-118.[4]丁春艳,杨振国.聚碳酸酯薄壁件的分层开裂机制[J].高分子材料科学与工程,2018,11 115-118. Ding C Y ,Yang Z G. Delamination Cracking Mechanism of Polycarbonate Thin-Walled Componet[J]. Polymer Materials Science & Engineering, 2008,11:115-118.[5]Taylor J E, Arnold J C. Environmental Stress Cracking of Polycarbonate in Mixed Environments[J]. Key Engineering Materials, 1996,118:59-68.[6]LEWIS P R.Environmental stress cracking of polycarbonate catheter connectors[J].Eng Failure Analysis,2009,16:1816-1824.[7]HANSEN C M.On predicting environmental stress cracking in polymers[J].Polym Degrad Stab,2002,77:43-53.[8] Lutfi F.AI-Saidi,Kell Mortensen,Kristoffer Almdal. Environmental stress cracking resistance behavior of polycarbonate in different chemicals by determination of the time-dependence of stress at constant strains. Polymer Degradation and Stability. 2003,82:451-461.[9]H.T.Wang, B.R.Pan, Q.G.Du and Y.Q.Li. The strain in the test environmental stress cracking of plastics. Polymer Testing 2003,22:125-128.[10]Jennifer M. Hoffman,Angele Sjong. ESC Failure of Polycarbonate components: two case studies[C].Spe Antec Procedings.2006: 1409-1413.[11]钱志国,尹继磊,李正梅,等.耐化学高抗冲PC/PBT合金的制备[J].工程塑料应 用,2016,1:49-52. Qian Z G, Yin J L, Li Z M, et al. Preparation of Chemical Resistant and High Impact PC / PBT Alloys [J] .Engineering Plastics Application ,2016,1:49-52.[12]Sanchez E M S. Ageing of PC/PBT blend:Mechanical properties and recycling possibility [J].Polymer Testing,2007,26(3):378-387. |