中国塑料

中国塑料 ›› 2014, Vol. 28 ›› Issue (10): 45-51 .DOI: 10.19491/j.issn.1001-9278.2014.10.010

• 材料与性能 • 上一篇    下一篇

聚丙烯酸钾/白灵菇菌糠复合高吸水树脂的制备与性能

程志强1,赵利1,刘丹康立娟2,张立夫   

  1. 1. 吉林农业大学资源与环境学院2. 吉林农业大学
  • 收稿日期:2014-03-28 修回日期:2014-05-28 出版日期:2014-10-26 发布日期:2014-10-26

Synthesis and Properties of the Composite Superabsorbent Polymer from Waste Material Cultured Pleurotus Nebrodensis and Potassium Polyacrylate

  • Received:2014-03-28 Revised:2014-05-28 Online:2014-10-26 Published:2014-10-26

摘要： 采用氢氧化钾(KOH)中和丙烯酸(AA)，通过微波辐射加热引发合成了聚丙烯酸钾(PAA-K)/白灵菇菌糠(WMCPN)复合高吸水树脂。系统地研究了菌糠、引发剂和交联剂相对AA的比率，微波辐射功率及丙烯酸中和度对高吸水树脂性能的影响。结果表明，菌糠用量为50 %(相对AA质量，下同)、引发剂用量为1.33 %、交联剂用量为1.0 %、微波功率为450 W及AA中和度为80 %时复合高吸水树脂吸液倍率最大，在蒸馏水中为974 g/g，在0.9 %氯化钠(NaCl)溶液中为59 g/g；WMCPN与PAA-K实现了共聚反应；在离心机转速为6000 r/min下，50 min复合高吸水树脂的失水率为6.2 %。

关键词: 聚丙烯酸钾, 菌糠, 高吸水树脂

Abstract: A composite superabsorbent resin was synthesized through microwave irradiation copolymerization of potassium polyacrylate with waste material cultured pleurotus nebrodensis (WMCPN). The influence of the synthesizing formulation, microwave power, and the neutralization degree of polyacrylic acid (AA) on the properties of superabsorbent resin was investigated. Optimal synthesis condition was found as: the loading of WMCPN, initiator, crosslinker were 50 %, 1.33 % and 1.0 %，based on the weight of AA, respectively; microwave power 450W, neutralization degree of AA 80 %. The maximum water absorbencies were found to be 974 g/g for distilled water and 59 g/g for 0.9 % NaCl solution. In addition, the water loss rate was 6.2 % after centrifuging at 6000 r/min for 60 minutes.

Key words: potassium polyacrylate, waste edible fungus substrate, superabsorbent resin

京公网安备11010802034965号　 京ICP备13020181号-2
《中国塑料》编辑部 ©2008-2024 版权所有
地址:北京市海淀区阜成路11号　邮编：100048
编辑部：010-68985541　联系信箱：cp@plaschina.com.cn
广告部/发行部：010-68985253　本系统由北京玛格泰克科技发展有限公司设计开发