1 |
郦正能. 应用断裂力学[M]. 北京: 北京航空航天大学出版社, 2012: 1⁃7, 186.
|
2 |
余寿文. 断裂力学的历史发展与思考[J]. 力学与实践, 2015, 37(3): 390⁃394.
|
|
YU S W. The Historical Development and Rethinking of Fracture Mechanics[J]. Mechanics in Engineering, 2015, 37(3): 390⁃394.
|
3 |
GRIFFITH A A. VI. The Phenomena of Rupture and Flow in Solids[J]. Philosophical Transactions of the Royal Society of London Series A, Containing Papers of a Mathematical or Physical Character, 1921, 221(587):163⁃198.
|
4 |
OROWAN E. Fracture and Strength of Solids[J]. Reports on Progress in Physics, 1949, 12(1): 185⁃232.
|
5 |
IRWIN G R. Plastic Zone Near A Crack and Fracture Toughness[J]. Proceedings of the 7th Sagamore Research Conference on Mechanics & Metals Behavior of Sheet Material. New York, 1960, 4: 463⁃478.
|
6 |
IRWIN G R, KIES J A, SMITH H L. Fracture Strength Relative to Onset and Arrest of Crack Propagation[J]. Proceedings of The American Society for Testing Material, 1958, 58: 640⁃657.
|
7 |
IRWIN G R. Analysis of Stresses and Strains Near the End of A Crack Traversing A Plate[J]. Journal of Applied Mechanics, 1957, 22: 361⁃364.
|
8 |
TE, PLASTICS, SUBCOMMITTEE SC 2, MECHANICAL BEHAVIOUR. ISO 13586 Plastics–Determination of Fracture Toughness (GICand K IC)–Linear Elastic Fracture Mechanics (LEFM) Approach[S]. Switzerland: International Standardization Organization, 2018.
|
9 |
DESOUZAJ M, YOSHIMURA H N, PERES F M, et al. Effect of Sample Pre⁃Cracking Method and Notch Geometry in Plane Strain Fracture Toughness Tests as Applied to a PMMA Resin[J]. Polymer Testing, 2012, 31(6): 834⁃840.
|
10 |
MARTÍNEZ A, ARENCÓN D, RODRÍGUEZ J, et al. Influence of the Notch Sharpening on the Impact Fracture Toughness of Ethylene⁃Propylene Block Copolymers[J]. Polymer Testing, 2014, 36: 75⁃81.
|
11 |
SALAZAR A, RODRÍGUEZ J, ARBEITER F, et al. Fracture Toughness of High Density Polyethylene: Fatigue Pre⁃Cracking Versus Femtolaser, Razor Sharpening and Broaching[J]. Engineering Fracture Mechanics, 2015, 149: 199⁃213.
|
12 |
BERER M, PINTER G. Determination of Crack Growth Kinetics in Non⁃Reinforced Semi⁃Crystalline Thermoplastics Using The Linear Elastic Fracture Mechanics (LEFM) Approach[J]. Polymer Testing, 2013, 32(5): 870⁃879.
|
13 |
VU C M, SINH L H,NGU YEN D D, et al. Simultaneous Improvement of the Fracture Toughness and Mechanical Characteristics of Amine⁃Functionalized Nano/Micro Glass Fibril⁃Reinforced Epoxy Resin[J]. Polymer Testing, 2018, 71: 200⁃208.
|
14 |
KIM B C, PARK S W, LEE D G. Fracture Toughness of The Nano⁃Particle Reinforced Epoxy Composite[J]. Composite Structures, 2008, 86(1/2/3): 69⁃77.
|
15 |
CHA J, JUN G H, PARK J K, et al. Improvement of Modulus, Strength and Fracture Toughness of CNT/Epoxy Nanocomposites through the Functionalization of Carbon Nanotubes[J]. Composites Part B: Engineering, 2017, 129: 169⁃179.
|
16 |
PITARRESI G, TOSCANO A, ALESSI S. Fracture Toughness of Synthesised High⁃Performance Epoxies Subject to Accelerated Water Aging[J]. Polymer Testing, 2018, 68: 248⁃260.
|
17 |
ZEBARJAD S M, SAJJADI S A, TAHANI M. Modification of Fracture Toughness of Isotactic Polypropylene With A Combination of EPR and CaCO3 Particles[J]. Journal of Materials Processing Technology, 2006, 175(1/2/3): 446⁃451.
|
18 |
WELLS A A. Application of Fracture Mechanics of and Beyond General Yielding[J]. British Welding Journal, 1963, 10: 563⁃570.
|
19 |
WELLS A A. Unstable Crack Propagation in Metals: Cleavage and Fast Fracture[J]. Proceedings of the Crack Propagation Symposium, 1961, 1: 210⁃230.
|
20 |
RICE J R. A Path Independent Integral and The Approximate Analysis of Strain Concentration by Notches and Cracks[J]. Journal of Applied Mechanics, 1968, 35(2): 379⁃386.
|
21 |
周峰峦. J积分转换成KIC误差分析[J]. 物理测试, 2017, 35(4): 52⁃53.
|
|
ZHOU F L. Error Analysis of KIC Calculated by J Integral[J]. Physics Examination and Testing, 2017, 35(4): 52⁃53.
|
22 |
MALITO L G, SOV J V, GLUDOVATZ B, et al. Fracture Toughness of Ultra⁃High Molecular Weight Polyethylene: A Basis for Defining the Crack⁃Initiation Toughness in Polymers[J]. Journal of the Mechanics and Physics of Solids, 2019, 122: 435⁃449.
|
23 |
SAIFULLAH A, THOMAS B, CRIPPS R, et al. Fracture Toughness of Rotationally Molded Polyethylene and Polypropylene[J]. Polymer Engineering & Science, 2018, 58(1): 63⁃73.
|
24 |
GOSCH A, ARBEITER F J, BERER M, et al. Comparison of J⁃integral Methods for the Characterization of Tough Polypropylene Grades Close to the Glass Transition Temperature[J]. Engineering Fracture Mechanics, 2018, 203: 2⁃17.
|
25 |
SALAZAR A, FRONTINI P M, RODRÍGUEZ J. Determination of Fracture Toughness of Propylene Polymers at Different Operating Temperatures[J]. Engineering Fracture Mechanics, 2014, 126: 87⁃107.
|
26 |
BÁRÁNY T, CZIGÁNY T, KARGER⁃KOCSIS J. Application of The Essential Work of Fracture (EWF) Concept for Polymers, Related Blends and Composites: A Review[J]. Progress in Polymer Science, 2010, 35(10): 1 257⁃1 287.
|
27 |
BROBERG K B. Critical Review of some Theories in Fracture Mechanics[J]. International Journal of Fracture Mechanics, 1968, 4(1): 11⁃19.
|
28 |
李忠明, 谢邦互, 杨鸣波, 等. 用基本断裂功表征聚合物的韧性[J]. 中国塑料, 2002, 16(6): 1⁃8.
|
|
LI Z M, XIE B H, YANG M B, et al. Toughness of Polymer Characterized by Essential Work of Fracture[J]. China Plastics, 2002, 16(6): 1⁃8.
|
29 |
张冬初. 高密度聚乙烯改性材料的断裂行为研究[D]. 湘潭: 湘潭大学, 2012.
|
30 |
PERES F M, TARPANI J R, SCHÖN C G. Essential Work of Fracture Testing Method Applied to Medium Density Polyethylene[J]. Procedia Materials Science, 2014, 3: 756⁃763.
|
31 |
BAO S P, TJONG S C. Impact Essential Work of Fracture of Polypropylene/Montmorillonite Nanocomposites Toughened With SEBS⁃g⁃MA Elastomer[J]. Composites Part A: Applied Science and Manufacturing, 2007, 38(2): 378⁃387.
|
32 |
MAZIDI M M, BERAHMAN R, EDALAT A. Phase Morphology, Fracture Toughness and Failure Mechanisms in Super⁃Toughened PLA/PB⁃g⁃SAN/PMMA Ternary Blends: A Quantitative Analysis of Crack Resistance[J]. Polymer Testing, 2018, 67: 380⁃391.
|
33 |
MAY⁃PAT A, VALADEZ⁃GONZÁLEZ A, HERRERA⁃FRANCO P J. Effect of Fiber Surface Treatments on the Essential Work of Fracture of HDPE⁃Continuous Henequen Fiber⁃Reinforced Composites[J]. Polymer Testing, 2013, 32(6): 1 114⁃1 122.
|
34 |
谢邦互, 杨鸣波, 冯建民, 等. 韧性聚合物材料的基本断裂功和变形行为研究[J]. 中国塑料, 2002, 16(7): 20⁃24.
|
|
XIE B H, YANG M B, FENG J M, et al. Essential Fracture Work and Deformation Behavior of Ductile Polymers[J]. China Plastics, 2002, 16(7): 20⁃24.
|
35 |
郑爱舞, 谢邦互, 李忠明, 等. 共聚聚丙烯材料的断裂行为[J]. 高分子材料科学与工程, 2004, 20(2): 181⁃184.
|
|
ZHENG A W, XIE B H, LI Z M, et al. Fracture Beha⁃viour of co⁃Polypropylene[J]. Polymer Materials Science & Engineering, 2004, 20(2): 181⁃184.
|
36 |
谢邦互, 郑爱舞, 李忠明, 等 试样厚度对共聚聚烯烃材料断裂行为参数的影响[J]. 高分子材料科学与工程, 2007,23(1): 185⁃188.
|
|
XIE B H, ZHENG A W, LI Z M, et al. Specimen Thickness Dependence of Fracture Parameters of A Co⁃Polypropylene[J]. Polymer Materials Science & Engineering, 2007,23(1): 185⁃188.
|
37 |
黄 源. 用基本断裂功方法表征聚丙烯/弹性体共混体系及纳米碳酸钙/聚丙烯复合材料韧性的研究[D]. 北京: 北京化工大学, 2007.
|
38 |
付 倬. 硅灰石/聚丙烯/POE 复合材料断裂行为的研究[D]. 湘潭: 湘潭大学, 2010.
|
39 |
JAR PYB, ADIANTO R, MUHAMMAD S. A Mechanistic Approach for Determining Plane⁃Stress Fracture Toughness of Polyethylene[J]. Engineering Fracture Mechanics, 2010, 77(14): 2 881⁃2 895.
|
40 |
JAR PYB, CAO W. A Deformation⁃Mechanism⁃Based Energy Partitioning Approach for Measurement of Plane⁃Stress Fracture Toughness of Low⁃Density Polyethylene[J]. Engineering Fracture Mechanics, 2012, 96: 179⁃191.
|
41 |
MARTINEZ A B, GAMEZ⁃PEREZ J, SANCHEZ⁃SOTO M, et al. The Essential Work of Fracture (EWF) Method–Analyzing The Post⁃Yielding Fracture Mechanics of Polymers[J]. Engineering Failure Analysis, 2009, 16(8): 2 604⁃2 617.
|