| [1]Rachtanapun P.Selke SE.M.,Matuana L.M. Relationship between cell morphology and impact strength of microcellular foamed high-density polyethylenepolypropylene blends[J].Polymer Engineering & Science, 2004, 44(8):1551-1560
[2]Shimbo M.Higashitani I,Miyano Y.,et al. Mechanism of Strength Improvement of Foamed Plastics Having Fine Cell[J].Journal of Cellular Plastics, 2007, 43(43):157-167
[3]Martínez-Díez J.A.,Rodríguez-Pérez MA.,Saja J.A.D.,et al. The Thermal Conductivity of a Polyethylene Foam Block Produced by a Compression Molding Process[J].Journal of Cellular Plastics, 2001, 37(1):21-42
[4]Eusebio S.Angel RP.M.,Jaine L.,et al. Influence of Solid Phase Conductivity and Cellular Structure on the Heat Transfer Mechanisms of Cellular Materials: Diverse Case Studies[J].Advanced Engineering Materials, 2009, 11(10):818-824
[5]Raquez J.M.,Habibi Y,Murariu M.,et al. Polylactide (PLA)-based nanocomposites[J].Progress in Polymer Science, 2013, 38(10-11):1504-1542
[6]Lee Y.H.,Wang KH.,Park C.B.,et al. Effects of clay dispersion on the foam morphology of LDPEclay nanocomposites[J].Journal of Applied Polymer Science, 2007, 103(4):2129-2134
[7]Zhu B.Zha W,Yang J.,et al. Layered-silicate based polystyrene nanocomposite microcellular foam using supercritical carbon dioxide as blowing agent[J].Polymer, 2010, 51(10):2177-2184
[8]Wang Y.Liao X,Luo Y.,et al. Influence of Surface-functionalized Graphene Oxide on the Cell Morphology of Poly(methyl methacrylate) Composite[J].Journal of Materials Science & Technology, 2015, 31(5):463-466
[9]Ding J.Ma W,Song F.,et al. Effect of nano-Calcium Carbonate on microcellular foaming of polypropylene[J].Journal of Materials Science, 2012, 48(6):2504-2511
[10]Yu P., Liu G., Li K., et al. Fabrication of polystyrene/nano-CaCO 3 foams with unimodal or bimodal cell structure from extrusion foaming using supercritical carbon dioxide[J]. [J].Polymer Composites, 2015, 37(6):1864-1873
[11]Li M., Cheng P., Zhang R., et al. Preparation of PMMA/graphene oxide microcellular foams using supercritical carbon dioxide[C]. IOP Conference Series Materials Science and Engineering. 2015.
[12]Kramschuster A.Gong S,Turng L.S.,et al. Injection-Molded Solid and Microcellular Polylactide and Polylactide Nanocomposites[J].Journal of Biobased Materials & Bioenergy, 2007, 1(1):37-45
[13]Pham Hoal Nam P.M.,Masami Okamoto*,Tadao KotakaFoam processing and cellular structure of polypropylene_clay nanocomposites[J].Polymer Engineering and Science, 2002, 42(9):1907-1918
[14]Zhang H.B.,Yan Q,Zheng W.G.,et al. Tough graphene-polymer microcellular foams for electromagnetic interference shielding[J].ACS Appl Mater Interfaces, 2011, 3(3):918-924
[15]Monnereau L., Urbanczyk L., Thomassin J.-M., et al. Gradient foaming of polycarbonate/carbon nanotube based nanocomposites with supercritical carbon dioxide and their EMI shielding performances[J].[J].Polymer, 2015, 59(1):117-123
[16]Yang J., Huang L., Li L., et al. Preparation of polystyrene/graphene oxide composites and their supercritical carbon dioxide foaming[J]. [J].Journal of Polymer Research, 2013, 20(6):1-9
[17]Zhi X., Zhang H.B., Liao Y.F., et al. Electrically conductive polycarbonate/carbon nanotube composites toughened with micron-scale voids[J]. [J].Carbon, 2015, 82(1):195-204
[18]Antunes M.Velasco JI. Multifunctional polymer foams with carbon nanoparticles[J].Progress in Polymer Science, 2014, 39(3):486-509
[19]Watkins S.J.,Jonker L,Arthur H.M. Facile preparation of lightweight microcellular polyetherimidegraphene composite foams for electromagnetic interference shielding[J].ACS Appl Mater Interfaces, 2013, 5(7):2677-2684
[20]Zhu Z.Park CB.,Zong J.H. Challenges to the Formation of Nano-cells in Foaming Processes[J].International Polymer Processing Journal of the Polymer Processing Society, 2008, 23(3):270-276
[21]J.S. Colton NP.S. The Nucleation of Microcellular Thermoplastic Foam With Addictives Part I Theoretical Considerations[J].Polymer Engineering and Science, 1987, 27(7):485-492
[22]J.S. Colton NP.S. The nucleation of microcellular thermoplastic foam with additives Part II Experimental results and discussion[J].Polymer Engineering and Science, 1987, 27(7):493-499
[23]Jonathan S.Colton NP.S. Nucleation of microcellular foam Theory and practice[J].Polymer Engineering and Science, 1987, 27(7):500-503
[24]C.Wang SN.L.,M. Bussmann,* W.T.Zhai,C. B. Park. Numerical investigation of nucleating-agent-enhanced heterogeneous nucleation[J].Ind. Eng. Chem. Res, 2010, 49(24):12783-12792
[25]Leung S.N., Wong A., Wang L.C., et al. Mechanism of extensional stress-induced cell formation in polymeric foaming processes with the presence of nucleating agents[J]. [J].The Journal of Supercritical Fluids, 2012, 63(1):187-198
[26]Leung S.N.,Wong A,Park C.B.,et al. Ideal surface geometries of nucleating agents to enhance cell nucleation in polymeric foaming processes[J].Journal of Applied Polymer Science, 2008, 108(6):3997-4003
[27]Wong A., Wijnands S.F.L., Kuboki T., et al. Mechanisms of nanoclay-enhanced plastic foaming processes: effects of nanoclay intercalation and exfoliation[J]. [J].Journal of Nanoparticle Research, 2013, 15(8):1-9
[28]Zheng W.G., Lee Y.H., Park C.B. Use of nanoparticles for improving the foaming behaviors of linear PP[J]. [J].Journal of Applied Polymer Science, 2010, 117(5):2972-2979
[29]Masami Okamoto P.H.N.,Pralay Maiti,Tadao Kotaka,Takashi Nakayama,Mitsuko Takada,Masahiro OhshimaBiaxial Flow-Induced Alignment of Silicate Layers in Polypropylene_Clay Nanocomposite Foam[J].Nano Letters, 2001, 1(9):503-505
[30]Taki K.Yanagimoto T,Funami E.,et al. Visual observation of CO 2 foaming of polypropylene-clay nanocomposites[J].Polymer Engineering & Science, 2004, 44(6):1004-1011
[31]Leung S.N.,Park CB.,Li H. Numerical simulation of polymeric foaming processes using modified nucleation theory[J].Plastics, Rubber and Composites, 2006, 35(3):93-100 |
