1 |
徐昌煜. 注射成型过程中热流道、模内自动切除大浇口和随形水路冷却的应用和效益[J].日用电器,2017,40(11):19⁃23.
|
|
XU C Y. Application and Benefit of Hot Runner, In⁃mold⁃de⁃large⁃gating, and Conformal Channel Cooling During Injection Molding [J]. Electrical Appliances, 2017,40(11):19⁃23.
|
2 |
陈晓东, 陶永亮. 模内热切技术的推广介绍[J]. 橡塑技术与装备, 2017, 43(18):14⁃17.
|
|
CHEN X D, TANG Y L. Promotion and Introduction of Hot Cut in Mold[J].China Rubber/Plastics Technology and Equipment, 2017, 43(18):14⁃17.
|
3 |
刘宝钊,李 斐,王艳萍,等. 基于UG的注塑模具分型过程探讨[J]. 塑料科技, 2012, 40(8):80⁃83.
|
|
LIU B Z, LI F, WANG Y P, et al. Discussion on Injection Mold Parting Process Based on UG [J]. Plastics Science and Technology, 2012, 40(8):80⁃83.
|
4 |
孙国强.小米充电宝前后盖注塑模具浇注系统模流分析及参数优化[D]. 天津:天津大学, 2017.
|
5 |
黄能会. 液压机构在注塑模具中的应用[J]. 机床与液压, 2018, 46(10):104⁃105.
|
|
HUANG N H. Application of Hydraulic Mechanism in Injection Molding[J]. Machine Tool & Hydraulics, 2018, 46(10):104⁃105.
|
6 |
曹驰,郝远,刘洪军,等. 注塑模抽芯油缸的选取和使用[J]. 模具技术, 2008, (1):39⁃42.
|
|
CAO C, HAO Y, LIU H J, et al. Selecting and Using of Loose Core Hydrocylinder in Injection Mold[J]. Die and Mould Technology, 2008, (1):39⁃42.
|