[1]张维合.注塑模具设计实用手册[M].北京:化学工业出版社, 2019:32-50.
[2]郭巍, 李金松, 严岿.基于正交试验的汽车座椅调角器注射成型质量优化[J].工程塑料应用, 2022, 50(09):64-69
[3]GUO W, LI J S, YAN K.Quality Optimization of Injection Molding for Automotive Seat Adjuster based on Orthogonal Test [J]. Engineering Plastics Application, 202, 50(09):64-69.[J].Engineering plastics application, 2022, 50(09):64-69
[4]赵利平, 张艳华, 于维斌等.扫地机器人尘盒盖注塑模具设计[J].中国塑料, 2022, 36(11):133-139
[5]ZHAO L P, ZHANG Y H, YU W B et al.Design of Injection Mold for Dust Box Cover of Sweeping Robot[J].China Plastics, 2022, 36(11):133-139
[6]王颖, 秦龙, 冯安平.汽车主副驾饰板顺序阀热流道注塑模具设计[J].工程塑料应用, 2022, 50(06):99-104
[7]WANG Y, QIN L, FENG A P.Design of Hot Runner Injection Mold for Vehicle Main and Passenger Trim Plate Sequential Valve[J].Engineering Plastics Application, 2022, 50(06):99-104
[8]刘晓飞.汽车前大灯灯壳复杂侧抽芯注塑模具设计[J].工程塑料应用, 2021, 49(11):99-103
[9]LIU X F.Design of Complex Side Core-pulling Injection Mold for Automotive Headlamp Shell[J].Engineering Plastics Application, 2021, 49(11):99-103
[10]熊毅, 冯啸霖.外侧整圈倒扣产品多向顺序抽芯注射模具[J].塑料工业, 2021, 49(08):81-86
[11]XIONG Y, FENG X L.Multi-direction Sequential Core-pulling Injection Mold for Inverted Product with Outer Circle[J].Plastics Industry, 2021, 49(08):81-86
[12]刘少华, 熊建武, 徐文庆等.安全座椅五次复合抽芯机构模具设计[J].塑料, 2021, 50(01):88-93
[13]LIU S H, XIONG J W, XU W Q et al.Die Design of Five-stage Composite Core-pulling Mechanism for Safety Seat[J].Plastics, 2021, 50(01):88-93
[14]刘红燕.控制器外壳滑块带斜顶脱模机构模具设计[J].塑料, 2021, 50(01):94-99
[15]LIU H Y.The Mold Design of Controller Shell Sliding Block with Inclined Top[J].Plastics, 2021, 50(01):94-99
[16]赵利平, 侯贤州, 罗哲等.汽车后保险杠热流道大型精密注塑模具设计[J].塑料科技, 2022, 50(12):94-98
[17]赵利平, 温煌英, 罗哲等.汽车灯饰面盖零件热流道双色注塑模具设计[J].工程塑料应用, 2022, 50(03):96-100
[18]ZHAO L P, WEN H Y, LUO Z et al.Design of Two-color Injection Mold for Hot Runner of Automobile Light Cover Parts[J].Engineering Plastics Application, 2022, 50(03):96-100
[19]徐超辉, 刘华刚, 王井玲.特种量杯多向斜顶成型注塑模具设计[J].工程塑料应用, 2017, 45(09):84-87
[20]XU C H, LIU H G, WANG J L.Engineering Plastics Application, 2017, 45(09):84-87.[J].Engineering plastics application, 2017, 45(09):84-87
[21]张雁亭, 肖国华, 郑子军等.化妆盒盖双叉斜顶脱模机构注射模设计[J].塑料, 2023, 52(01):94-98
[22]ZHANG Y T, XIAO G H, ZHENG Z J et al.Design of Injection Mold for Demoulding Mechanism of Makeup Box Cover with Double Fork Oblique Top[J].Plastics, 2023, 52(01):94-98
|