中国塑料 ›› 2008, Vol. 22 ›› Issue (03): 57-61.DOI: 10.19491/j.issn.1001-9278.2008.03.013

• 加工与应用 • 上一篇    下一篇

钢丝缠绕增强塑料复合管外压失稳理论分析

郑津洋,朱彦聪,李翔,高永建,李稚娴   

  1. 浙江大学化工机械研究所,浙江杭州310027
  • 收稿日期:2007-11-19 修回日期:1900-01-01 出版日期:2008-03-26 发布日期:2008-03-26

Theory Analysis on Buckling of Plastics Pipes Reinforced by Winding Steel Wires under External Pressure

ZHENG Jin-yang,ZHU Yan-cong,LI Xiang,GAO Yong-jian,LI Ya-xian   

  1. Institute of Chemical Machinery and Process Equipment, Zhejiang Uninversity, Hangzhou 310027, China
  • Received:2007-11-19 Revised:1900-01-01 Online:2008-03-26 Published:2008-03-26
  • Contact: ZHENG Jin-yang

摘要: 钢丝缠绕增强塑料复合管(PSP)外压失稳试验研究提出了PSP外液压试验装置和试验方法,并进行了PSP瞬时临界失稳压力和长时蠕变失稳压力的测量。为了进一步理解PSP的失稳现象和失稳的力学机理,提出了一个PSP失稳压力预测力学模型,将PSP简化为四层正交各向异性层合管,用回字形模型推导出复合层弹性常数,根据唐奈扁壳理论建立PSP瞬时失稳临界压力力学模型。理论结果与试验值吻合较好,表明给出的计算模型可以较好预测复合管的失稳临界压力。进一步分析PSP设计参数与临界压力的关系,提出提高PSP失稳临界压力的措施。最后对PSP持久临界失稳压力进行了估算.

关键词: 钢骨架复合管, 外压失稳, 屈曲分析

Abstract: the short-term buckling critical pressure and long-term buckling creep pressure were measated according to previously proposed methods. In order to understand the mechanisms of the buckling of PSP, a model was formulated to predict the buckling critical pressure. PSP was simplified as orthotropic laminated cylinder shell, and elastic parameters of single layers were estimated based on rectangle model. Short-term buckling critical pressure was deduced from Donnell shell theory. theoretical prediction on short-term buckling critical pressure agreed well with experimental data. Relationship between structure parameters and critical pressure were analyzed and measures to improve the critical pressure were proposed.

Key words: steel mesh skeleton composite pipe, stability under external pressure, buckling analysis