中国塑料

中国塑料 ›› 2009, Vol. 23 ›› Issue (01): 105-109 .DOI: 10.19491/j.issn.1001-9278.2009.01.023

• 机械与模具 • 上一篇    

Pro/E在汽车扣手盖注塑模设计中的应用

赵龙志，赵明娟，杨自成，张尚兵   

  1. 1. 华东交通大学，载运工具与装备省部共建教育部重点实验室，江西 南昌 330013； 2.辽阳金兴汽车内饰集团公司，辽宁 辽阳 111000
  • 收稿日期:2008-10-07 修回日期:1900-01-01 出版日期:2009-01-26 发布日期:2009-01-26

Application of CAD/CAE in Design of Plastic Injection Moulding for Button Lid

ZHAO Long-zhi, ZHAO Ming-juan, YANG Zi-cheng, ZHANG Shang-bing   

  1. 1.Key Laboratory of Conveyance and Equipment of Ministry of Education, East China Jiaotong University, Nanchang 330013, China; 2.Liaoyang Jinxing Automobile Inner Decoration Group Co., Ltd, Liaoyang111000, China
  • Received:2008-10-07 Revised:1900-01-01 Online:2009-01-26 Published:2009-01-26
  • Contact: ZHAO Long-zhi

摘要： 介绍了Pro/E和Moldflow软件在汽车内饰件扣手盖注塑模具设计中的应用。采用Pro/E软件建立了产品模型，创建模具体积块，建立了分型面，并对模具进行了铸模模拟，确保了模具运行可靠。最后基于模具体积块，利用EMX4.1进行了模架调用与装配。结果表明，采用三维CAD/CAE技术能直接进行产品到模具体积块的设计，缩短了产品的开发周期，大大降低了模具的设计成本。

关键词: 扣手盖, Pro/E, 分型面, 模架, Moldflow

Abstract: Application of Pro/E and Moldflow software in the design of injection mould for the button lid of the automobile inner decoration was introduced in this paper. Using Pro/E software, a product model was formulated, the block configuration and parting surface were determined, which ensured the mould working reliably. By aid of EMX module, the mould frame was designed transferable and adjustable. Based on CAE/CAD technology, the design of product and mould could carried out directly, which decreased the production cycle, improved the quality of the injection mould.

Key words: button lid, Pro/E, parting surface, mould frame, Moldflow

京公网安备11010802034965号　 京ICP备13020181号-2
《中国塑料》编辑部 ©2008-2024 版权所有
地址:北京市海淀区阜成路11号　邮编：100048
编辑部：010-68985541　联系信箱：cp@plaschina.com.cn
广告部/发行部：010-68985253　本系统由北京玛格泰克科技发展有限公司设计开发