中国塑料

中国塑料 ›› 2009, Vol. 23 ›› Issue (02): 98-103 .DOI: 10.19491/j.issn.1001-9278.2009.02.022

• 机械与模具 • 上一篇    

基于LabvIEW的多通道注塑机数据采集系统开发

陈清培，闫宝瑞，杨于光，张安震   

  1. 1．北京化工大学机电学院，北京，100029； 2．宁波海天塑机集团有限公司，宁波，浙江，315821
  • 收稿日期:2008-10-07 修回日期:1900-01-01 出版日期:2009-02-26 发布日期:2009-02-26

The Development of Multi-Channel Data Acquisition System Based on LabVIEW for Plastic Injection Moulding Machine

Chen Qingpei, Yan Baorui, Yang Yuguang, Zhang Anzhen   

  1. 1．College of Mechanical and Electronical Engineering, Beijing University of Chemical Technology, Beijing, 100029,China2．Ningbo Haitian Plastics Machinery Group Co.,Ltd, Ningbo, Zhejiang,315821,China
  • Received:2008-10-07 Revised:1900-01-01 Online:2009-02-26 Published:2009-02-26
  • Contact: Chen Qingpei,

摘要： 开发了一套多功能、多通道通用的数据采集系统，该系统以美国NI公司的M系列数据采集卡、信号调理器以及研华工控机作为硬件平台，软件开发采用Labview图形化编程语言。系统将一些关键配置参数开放给用户，大大提高了系统的通用性。实验结果表明，该系统具有界面友好、操作方便、测量效率高的特点，测量精度高和稳定性好，可以应用于注塑机的动态参数采集和监测中。

Abstract: Based on National Instruments’ M-series data collection card, Signal Conditioning module, and Advantech IPC, a multi-function, multi-channel universal data collection system was developed. The software of the system employed Labview graphical programming language. Using opening configuration parameters, the universality of the system was greatly improved. The system exhibited characteristics of good interface, easy operation, and high measuring efficiency, as well as high measuring accuracy and good stability. It could be used to collect and monitor dynamic parameters of plastic injection molding machine.

Key words: Plastic injection mounding machine, Multi-Channel, Data acquisition system, Labview

京公网安备11010802034965号　 京ICP备13020181号-2
《中国塑料》编辑部 ©2008-2023 版权所有
地址:北京市海淀区阜成路11号　邮编：100048
编辑部：010-68985541　联系信箱：cp@plaschina.com.cn
广告部/发行部：010-68985253　本系统由北京玛格泰克科技发展有限公司设计开发