PE-HD-g-MAH对PE-HD/PA6共混合金性能的影响

doi:10.19491/j.issn.1001-9278.2009.04.007

中国塑料 ›› 2009, Vol. 23 ›› Issue (04): 29-31 .DOI: 10.19491/j.issn.1001-9278.2009.04.007

PE-HD-g-MAH对PE-HD/PA6共混合金性能的影响

揣成智车庆浩 MAHMOOD Iqba 田世雄

天津科技大学

收稿日期:2008-12-22 修回日期:1900-01-01 出版日期:2009-04-26 发布日期:2009-04-26

Property characteristics of HDPE-g-MAH/PA6 alloy of much component HDPE

CHUAI Cheng-Zhi

Received:2008-12-22 Revised:1900-01-01 Online:2009-04-26 Published:2009-04-26
Contact: CHUAI Cheng-Zhi

摘要/Abstract

摘要： 摘要：采用熔融法制备了高密度聚乙烯（HDPE）与马来酸酐（MAH）接枝物（HDPE-g-MAH），并以此接枝物制备了 HDPE-g-MAH/PA6共混合金，通过调整引发剂过氧化二异丙苯（DCP）和马来酸酐（MAH)的用量来控制接枝率，并研究该共混合金的性能与接枝率之间的关系。结果表明：HDPE-g-MAH/PA6共混合金的力学性能、耐热性等均较纯高密度聚乙烯有很大提高，当HDPE:PA6:MAH:DCP份数比例为60:40:1:0.3时，共混合金表现出较佳的性能。

Abstract: ABSTRACT:Maleic anhydride grafted HDPE (HDPE-g-MAH) and HDPE-g-MAH/PA6 blend alloy were prepared by melt grafting. The grafting degree was controlled by alternating the ratio of maleic anhydride and dicumyl peroxide. The relationship between the properties of HDPE-g-MAH/PA6 blend alloy and the graft ratio of HDPE-g-MAH was studied. The results indicated that the mechanical properties and heat resistance of HDPE-g-MAH/PA6 blend alloy increased compared pure HDPE. The better properties of the blend alloy were observed when the ratio of HDPE:PA6:MAH:DCP was 60:40:1:0.3.

揣成智车庆浩 MAHMOOD Iqba 田世雄. PE-HD-g-MAH对PE-HD/PA6共混合金性能的影响[J]. 中国塑料, 2009, 23(04): 29-31 .

CHUAI Cheng-Zhi. Property characteristics of HDPE-g-MAH/PA6 alloy of much component HDPE[J]. China Plastics, 2009, 23(04): 29-31 .

PE-HD-g-MAH对PE-HD/PA6共混合金性能的影响

Property characteristics of HDPE-g-MAH/PA6 alloy of much component HDPE

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 0

编辑推荐

Metrics

本文评价