微分注塑机的研制

doi:10.19491/j.issn.1001-9278.2011.07.020

中国塑料 ›› 2011, Vol. 25 ›› Issue (07): 89-93 .DOI: 10.19491/j.issn.1001-9278.2011.07.020

微分注塑机的研制

张攀攀王建谢鹏程王小华杨卫民

北京化工大学机电工程学院北京理工大学化工与环境学院北京化工大学英蓝实验室北京化工大学英蓝实验室北京化工大学英蓝实验室

收稿日期:2011-04-06 修回日期:2011-04-17 出版日期:2011-07-26 发布日期:2011-07-26

Development of Multi Microinjection Molding Machines for Thermoplastics

ZHANG Panpan;WANG Jian;XIE Pengcheng;WANG Xiaohua;YANG Weimin

Received:2011-04-06 Revised:2011-04-17 Online:2011-07-26 Published:2011-07-26
Contact: YANG Weimin

摘要/Abstract

摘要： 系统地介绍了微型注塑机注塑单元的结构形式，分析了各种注塑单元的特点；研制了一种基于精密齿轮泵的微分注塑机，详细地阐述了微分注射成型的机理，对比了微注射成型和微分注射成型的基本工艺流程；通过试验初步检验了微分注射成型效果。结果表明，微分注射成型可高效率地成型微型制品。

关键词: 微型注塑机, 微型制品, 注塑单元, 微分注塑机

Abstract: The configuration and characters of several microinjection molding plasticizing units were systematically introduced. A novel concept of microinjection molding system was presented. The system was designed as a multi microinjection module, which is matched with a vertical injection molding machine and applied on common injection molding machines. The mechanism and basic process of the multi microinjection molding was stated; via the multi microinjection molding, multiple microparts were obtained. The molding experiment indicates the efficient microinjection capability of the multi microinjection molding machines.

Key words: microinjection molding machine, micro part, injection unit, multi microinjection molding machine

张攀攀王建谢鹏程王小华杨卫民. 微分注塑机的研制[J]. 中国塑料, 2011, 25(07): 89-93 .

ZHANG Panpan, WANG Jian, XIE Pengcheng, WANG Xiaohua, YANG Weimin. Development of Multi Microinjection Molding Machines for Thermoplastics[J]. China Plastics, 2011, 25(07): 89-93 .

微分注塑机的研制

Development of Multi Microinjection Molding Machines for Thermoplastics

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 0

编辑推荐

Metrics

本文评价