聚合物叶片塑化挤出机正位移输送特性研究

doi:10.19491/j.issn.1001-9278.2013.12.013

中国塑料 ›› 2013, Vol. 27 ›› Issue (12): 68-72 .DOI: 10.19491/j.issn.1001-9278.2013.12.013

聚合物叶片塑化挤出机正位移输送特性研究

杨智韬林澌柯陈荣源徐百平瞿金平

华南理工大学聚合物新型成型装备国家工程研究中心；聚合物成型加工工程教育部重点实验室华南理工大学华南理工大学聚合物新型成型装备国家工程研究中心

收稿日期:2013-08-16 修回日期:1900-01-01 出版日期:2013-08-26 发布日期:2013-08-26

Study on Positive Displacement Conveying Characteristics of Polymer Vane Extruder

LIN si-ke

Received:2013-08-16 Revised:1900-01-01 Online:2013-08-26 Published:2013-08-26
Contact: LIN si-ke

摘要/Abstract

摘要： 在对聚合物叶片塑化挤出机结构特征及工作原理分析的基础上，建立了叶片塑化挤出机正位移物料输运理论模型，对聚合物叶片塑化挤出机物料输送特性进行了探讨，同时针对叶片挤出机与螺杆挤出机的物料输送特性进行了实验研究。实验结果表明，理论产量与实际产量基本符合，叶片挤出机物料输送效率更高，受模头压力影响小，同时对物料特性依赖程度更低。

关键词: 叶片塑化挤出机, 正位移输送, 挤出产量

Abstract: Based on an analysis of structural characteristics and the working principle of vane plasticization extruder, a theoretical model of polymer conveying of vane extruder was formulated for studying the polymer materials conveying characteristics in a vane extruder. The experiments related to the polymer materials conveying characteristics were performed using a vane extruder and a screw extruder. It showed that the theory and practical productions of vane extruder were consistent. Compared with conventional single-screw extruder, the efficiency of extrusion conveying of vane extruder was higher, and less dependent on die pressure and material properties.

Key words: vane plasticization extruder, positive displacement conveying, extrusion output

中图分类号:

TQ320.663

杨智韬林澌柯陈荣源徐百平瞿金平. 聚合物叶片塑化挤出机正位移输送特性研究[J]. 中国塑料, 2013, 27(12): 68-72 .

LIN si-ke . Study on Positive Displacement Conveying Characteristics of Polymer Vane Extruder[J]. China Plastics, 2013, 27(12): 68-72 .

聚合物叶片塑化挤出机正位移输送特性研究

Study on Positive Displacement Conveying Characteristics of Polymer Vane Extruder

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 1

编辑推荐

Metrics

本文评价