冰箱隔板大型双层注塑模设计

doi:10.19491/j.issn.1001-9278.2014.06.021

中国塑料 ›› 2014, Vol. 28 ›› Issue (06): 112-116 .DOI: 10.19491/j.issn.1001-9278.2014.06.021

• 机械与模具 • 上一篇

冰箱隔板大型双层注塑模设计

张维合

广东科技学院

收稿日期:2014-03-19 修回日期:2014-05-15 出版日期:2014-06-26 发布日期:2014-06-26

Design of Large and Double Layer Injection Molds for Refrigerator Spacers

张维合 allenzhang

Received:2014-03-19 Revised:2014-05-15 Online:2014-06-26 Published:2014-06-26
Contact: 张维合 allenzhang

摘要/Abstract

摘要： 根据冰箱隔板的结构和大小，设计了一副大型双层注塑模具。重点分析和研究了模具的成型零件、浇注系统、侧向抽芯机构、冷却系统、导向定位系统、联动开模机构和脱模系统。通过采用热流道浇注系统和齿轮和齿条式联动开模机构，满足了大型塑件的成型要求，成型质量和注塑周期完全符合客户要求。

关键词: 冰箱隔板, 大型双层注塑模具, 热流道浇注系统, 齿轮齿条式联动开模机构

Abstract: A large volume double-layer injection mold was designed for refrigerator spacers. The various parts, gating system, side core-pulling mechanism, cooling system, guide positioning system, opening mechanism, and ejection system of the mold was studied. By employing a hot runner gating system and a mold opening mechanism of gear and rack, the designed mold was well met the requirements for the quality and molding cycle of the refrigerator spacers.

Key words: refrigerator spacer, large and double layer injection mold, hot runner system, rack and pinion mould opening mechanism

张维合. 冰箱隔板大型双层注塑模设计[J]. 中国塑料, 2014, 28(06): 112-116 .

张维合 allenzhang. Design of Large and Double Layer Injection Molds for Refrigerator Spacers[J]. China Plastics, 2014, 28(06): 112-116 .

冰箱隔板大型双层注塑模设计

Design of Large and Double Layer Injection Molds for Refrigerator Spacers

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 0

编辑推荐

Metrics

本文评价