基于单神经元自适应PID控制的注塑机合模机构

doi:10.19491/j.issn.1001-9278.2015.11.019

中国塑料 ›› 2015, Vol. 29 ›› Issue (11): 108-112 .DOI: 10.19491/j.issn.1001-9278.2015.11.019

基于单神经元自适应PID控制的注塑机合模机构

罗亮,李江源,刘知贵

西南科技大学

收稿日期:2015-06-02 修回日期:2015-10-18 出版日期:2015-11-26 发布日期:2015-11-26

Single Neuron Adaptive PID Control for Clamping Mechanism Injection Molding Machines

liang luo,li jiangyuan

Received:2015-06-02 Revised:2015-10-18 Online:2015-11-26 Published:2015-11-26
Contact: liang luo

摘要/Abstract

摘要： 设计了一个单神经元自适应比例积分微分控制器(PID)控制器，使用AMESim/Simulink联合仿真机制，建立了注塑机合模机构液压伺服系统的模型。由仿真结果看，与常规PID控制器相比，使用单神经元自适应PID控制器控制的系统有着更好的鲁棒性，系统获得了更好的环境适应性。

关键词: 关键词：注塑机, 合模系统, 单神经元自适应PID

Abstract: A single neuron adaptive PID controller was designed, using AMESim and Simulink for joint simulation, established the model of hydraulic servo system of injection molding machine clamping mechanism. The simulation results show that compared with the conventional PID controller, using single neuron adaptive PID controller, the system has better robustness and makes the system has good environmental adaptability.

Key words: Keywords: injection molding machine, Mould Closing System, ?single-neuron adaptive pid controller

罗亮, 李江源, 刘知贵. 基于单神经元自适应PID控制的注塑机合模机构[J]. 中国塑料, 2015, 29(11): 108-112 .

liang luo, li jiangyuan. Single Neuron Adaptive PID Control for Clamping Mechanism Injection Molding Machines[J]. China Plastics, 2015, 29(11): 108-112 .

基于单神经元自适应PID控制的注塑机合模机构

Single Neuron Adaptive PID Control for Clamping Mechanism Injection Molding Machines

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 1

编辑推荐

Metrics

本文评价