中国塑料

中国塑料 ›› 2016, Vol. 30 ›› Issue (02): 39-42 .DOI: 10.19491/j.issn.1001-9278.2016.02.008

• 材料与性能 • 上一篇    下一篇

聚醚醚酮表面接枝O-羧甲基壳聚糖及其血液相容性研究

刘焕萍1,孙辉2   

  1. 1. 北京工商大学材料与机械工程学院2. 北京工商大学
  • 收稿日期:2015-10-20 修回日期:2015-12-16 出版日期:2016-02-26 发布日期:2016-02-26

Surface Modification of PEEK by Immobilization of Ocarboxymethyl Chitosan for Improvement of Blood Compatibility

  • Received:2015-10-20 Revised:2015-12-16 Online:2016-02-26 Published:2016-02-26

摘要： 采用紫外自引发光接枝在聚醚醚酮表面接枝聚丙烯酸，并进而以此为反应位点，通过共价键结合引入O羧甲基壳聚糖(O-CMC)。采用接触角测定仪、扫描电子显微镜、X射线光电子能谱和血小板粘附实验等对改性聚醚醚酮进行了表征。结果表明，改性聚醚醚酮表面浸润性得到提高，具有抗凝血性能。

关键词: 聚醚醚酮, O-羧甲基壳聚糖, 表面接枝, 血液相容性

Abstract: Poly(ether ether ketone) was surface modified via immobilization of O-carboxymethyl chitosan. Acrylic acid was first introduced onto surface of PEEK by UV-initiated graft polymerization. Then O-carboxymethyl chitosan was subsequently covalent bonded onto the PEEK film. XPS, SEM, and water contact measurements were used to characterize the modified surface. The surface wettability was significantly improved with water contact angle drop from 86 ° for blank PEEK to 42 ° for modified PEEK. Palate adhesion experiments showed that the modified PEEK exhibit anti-coagulation properties.

Key words: Poly(ether ether ketone), O-carboxymethyl chitosan, Surface grafting, blood compatibility

京公网安备11010802034965号　 京ICP备13020181号-2
《中国塑料》编辑部 ©2008-2023 版权所有
地址:北京市海淀区阜成路11号　邮编：100048
编辑部：010-68985541　联系信箱：cp@plaschina.com.cn
广告部/发行部：010-68985253　本系统由北京玛格泰克科技发展有限公司设计开发