表面结构不同的纳米二氧化硅原位改性聚甲醛的研究

doi:10.19491/j.issn.1001-9278.2018.02.006

中国塑料 ›› 2018, Vol. 32 ›› Issue (02): 37-43.DOI: 10.19491/j.issn.1001-9278.2018.02.006

表面结构不同的纳米二氧化硅原位改性聚甲醛的研究

朱方,李庆硕,田华丽,张予东,常海波

河南大学化学化工学院

收稿日期:2017-08-28 修回日期:2017-10-25 出版日期:2018-02-26 发布日期:2018-02-26
基金资助:
国家自然科学基金青年基金;河南-国家自然科学委员会联合基金;河南省教育厅项目

Study on In-situ Modification of Polyoxymethylene with Silica Nanoparticles with Different Surface Structures

Received:2017-08-28 Revised:2017-10-25 Online:2018-02-26 Published:2018-02-26

摘要/Abstract

摘要： 分别选用环氧基纳米二氧化硅（SiO2）(RNSE)和甲基纳米SiO2(DNS)为填料，通过原位聚合法制备了聚甲醛(POM)/纳米SiO2复合材料，采用场发射扫描电子显微镜、热重分析仪、差示扫描量热仪、偏光显微镜和X射线衍射仪对所得复合材料的结构、热稳定性和结晶行为进行了研究。结果表明，纳米SiO2的用量和表面结构不仅影响了其在复合材料中的分散性，而且对复合材料的热稳定性和结晶行为影响显著；当RNSE的用量少于1 %（质量分数，下同）时，其在POM基体中具有较好的分散性，且相对于DNS，RNSE的分散性更好；纳米SiO2加速了POM结晶，减小了球晶尺寸，提高了结晶度，而且RNSE比DNS对POM的结晶具有更显著的促进作用，但纳米SiO2没有改变POM的晶体结构；引入纳米SiO2降低了POM的热稳定性。

Abstract: Polyoxymethylene (POM)/silica nanoparticle composites were fabricated by in-situ polymerization using silica nanoparticles surface-modified with epoxy (RNSE) and methyl groups (DNS) as fillers, and their structure, thermal stability and crystallization behaviors were investigated by scanning electron microscopy, thermogravimetric analysis (TGA), differential scanning calorimetry and polarized light microscopy. The results indicated that RNSE was well dispersed in the POM matrix at the content lower than 1 phr. RNSE exhibited a better dispersibility in the matrix than DNS. The silica nanoparticles could promote the crystallization of POM, thus resulting in the decrease of spherulite size and the improvement of crystalline degree. Compared with DNS, RNSE presented a more effective enhancement on the crystallinity of POM. However, the thermal stability of the composites was reduced by the silica nanoparticles.

朱方李庆硕田华丽张予东常海波. 表面结构不同的纳米二氧化硅原位改性聚甲醛的研究[J]. 中国塑料, 2018, 32(02): 37-43.

参考文献

[1] Li Y Y, Zhou T, Chen Z G, et al. Non-isothermal Crystallization Process of Polyoxymethylene Studied by Two-Dimensional Correlation Infrared Spectroscopy [J], Polymer, 2011, 52, 2059-2069
[2] Ding Q, Dai W L, Zhang P. The Effect of Polyvinylidene Fluoride on Nonisothermal Crystallization Behavior of Polyoxymethylene [J]. Polymer Engineering & Science, 2007, 47(12): 2034–2040.
[3] M Sánchez-Soto, Illescas S, Milliman H, et al. Morphology and Thermomechanical Properties of Melt-Mixed Polyoxymethylene/Polyhedral Oligomeric Silsesquioxane Nanocomposites [J]. Macromolecular Materials & Engineering, 2010, 295 (9) :846–858
[4] Xu W B, He P S, Isothermal Crystallization Behavior of Polyoxymethylene with and without Nucleating Agents [J], Journal of Applied Polymer Science, 2001, 80, 304-310.
[5] Jose A J, Alagar M. Development and Characterization of Organoclay-Filled Polyoxymethylene Nanocomposites for High Performance Applications [J]. Polymer Composites, 2011, 32(9): 1315–1324.
[6] Zhao X W, Ye L. Structure and Mechanical Properties of Polyoxymethylene/Multi-Walled Carbon Nanotube Composites [J]. Composites: Part B, 2011, 42, 926–933
[7]Sun T J, Ye L, Zhao X W. Thermostabilising and Nucleating Effect of Montmorillonite on Polyoxymethylene [J]. Plastics Rubber & Composites, 2007, 36 (7-8): 350-359．
[8] Wang J, Hu X G, Tian M, et al. Study on Mechanical and Tribological Property of Nanometer ZrO2-filled Polyoxymethylene Composites [J]. Polymer-Plastics Technology and Engineering, 2007, 46 (5): 469-473
[9] 唐明静, 杨明娇, 淡宜, 聚丙烯酸醋/TiO2复合粒子对聚甲醛结构和性能的影响 [J]. 中国塑料, 2006 20(6): 44-44
Tang Ming-jing, Yang Ming-jiao, Dan Yi, Influence of Polyacrylates/TiO2 Composite Particles on the Microstructure and Properties of POM [J]. China Plastics, 2006 20(6) :44-44
[10] Wacharawichanant S, Sangkhaphan A, Sa-Nguanwong N, et al. Effects of Particle Type on Thermal and Mechanical Properties of Polyoxymethylene Nanocomposites [J]. Journal of Applied Polymer Science, 2012, 123, 3217–3224.
[11] Xu W B, He P S. Crystallization Characteristics of PoIyoxymethylene with Attapulgite as Nucleating Agent [J], Polymer Engineering & Science, 2010, 41 (11): 1903-1912
[12] 唐龙祥，刘榛，刘春华，等．聚丙烯酸丁酯接枝的纳米SiO2对聚甲醛的改性[J]．应用化学, 2009, 26(7): 775-779.
Tang Longxiang, Liu Zhen, Liu Chunhua et al. Nano-SiO2 Grafted Polybutylacrylate and Its Modification for Polyoxymethylene [J]. Chinese Journal of Applied Chemistry, 2009, 26(7): 775-779.
[13] 曲敏杰, 张金东, 马春, 等．聚氨酯/纳米二氧化硅/POM复合材料的研究POM[J]．塑料工业, 2011, 39(4): 58-60.
Qu Minjie, Zhang Jindong, Ma Chun, et al. Study of TPU/Nano-SiO2/POM Composite Materials [J]. China Plastics Industry, 2011, 39(4): 58-60.
[14] 张予东，郭莉萍，徐翔民等. 聚甲醛/可反应性纳米SiO2复合材料的非等温结晶动力学及动态力学性能 [J]. 中国塑料, 2013, 27(2): 44-50.
Zhang Yudong, Guo Liping, Xu Xiangmin, et al. Non-isothermal Crystallization Kinetics and Dynamic Mechanical Properties of Polyoxymethylene/Reactable Nano-SiO2 Composite [J]. China Plastic, 2013, 27(2): 44-50.
[15] 张予东，郭莉萍，徐翔民，等. 聚甲醛/可反应性纳米SiO2复合材料的等温结晶及热分解行为 [J]. 中国塑料, 2013, 27(5): 49-55.
Zhang Yudong, Guo Liping, Xu Xiangmin, et al. Isothermal Crystallization and Thermal Decomposition of Polyoxymethylene/Reactable Nano-silica Composite [J]. China Plastic, 2013, 27(5): 49-55.
[16] Guo L P, Xu X M, Zhang Y D, et al. Effect of Functionalized Nanosilica on Properties of Polyoxymethylene-Matrix Nanocomposites [J]. Polymer Composites, 2014, 35 (1): 127-136.
[17] Xu X M, Guo L P, Zhang Y D, et al. Mechanical and Thermal Properties of Reactable Nano-SiO2/Polyoxymethylene Composites [J]. Advanced Materials Research [J], 2012, 535-537: 103-109.
[18] 崔敏慧, 谢洪泉. 三聚甲醛和环氧乙烷的本体共聚[J]. 高分子材料科学与工程, 1994, 3: 31-36.
Cui Minhui, Xie Hongquan. Bulk Copolymerization of Trioxane and Ethylene Epoxide [J]. Polymeric materials science and Engineering, 1994, 3: 31-36.
[19] Pielichowska K, Szczygielska A , Spasówka E. Preparation and Characterization of Polyoxymethylene-Copolymer/Hydroxyapatite Nanocomposites for Long-Term Bone Implants [J]. Polymers for Advanced Technologies, 2012 , 23 (8) :1141–1150.

表面结构不同的纳米二氧化硅原位改性聚甲醛的研究

Study on In-situ Modification of Polyoxymethylene with Silica Nanoparticles with Different Surface Structures

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 0

编辑推荐

Metrics

本文评价