燃气管材用聚乙烯专用料的应用发展

doi:10.19491/j.issn.1001-9278.2018.07.003

中国塑料 ›› 2018, Vol. 32 ›› Issue (07): 21-27.DOI: 10.19491/j.issn.1001-9278.2018.07.003

燃气管材用聚乙烯专用料的应用发展

黄国家¹,伍振凌¹,利观宝¹,李露水¹,吴文栋²,涂欣¹

1. 广州特种承压设备检测研究院
2. 广州市特种承压设备检测研究院

收稿日期:2018-01-17 修回日期:2018-03-22 出版日期:2018-07-26 发布日期:2018-08-24
基金资助:
燃气管材聚乙烯的结晶行为与结构性能研究;聚乙烯燃气管材热失效机理研究

Application Progress of Polyethylene-based Special-purpose Materials for Gas Pipe

Received:2018-01-17 Revised:2018-03-22 Online:2018-07-26 Published:2018-08-24

摘要/Abstract

摘要： 回顾了塑料管道在燃气输配领域的应用发展，简要介绍聚烯烃的催化关键制备技术的发展历程；比较了国内燃气用埋地聚乙烯（PE）管材制造国家标准(GB 15558.1)2015版和2003版对PE混配料的性能要求变化；分析比较了国际标准ISO 4437和欧洲标准EN 1555的对燃气管PE专用料的性能要求。重点阐述了PE80、PE100、PE100RC的高性能特点及发展过程,提出了开发PE125的建议。

Abstract: This article reviewed the application progress of plastic pipe in the field of gas transport and distribution. The development history of key technologies for preparation of polyolefin was introduced briefly, and the difference of performance requirements for polyethylene (PE) compounds was analyzed by comparing GB 15558.1—2015 with GB 15558.1—2003. Moreover, the difference of performance requirements between the international standard ISO 4437 and European standard EN 1555 was also analyzed. The highperformance characteristics and development processes of PE80, PE100, PE100RC grad PE materials were particularly discussed, and the suggestion for the development of PE125 grad PE material was proposed.

黄国家伍振凌利观宝李露水吴文栋涂欣. 燃气管材用聚乙烯专用料的应用发展[J]. 中国塑料, 2018, 32(07): 21-27.

参考文献

[1]辛明亮，李茂东，张术宽，等. 聚乙烯燃气管道失效模式研究进展[J]. 中国塑料，2015，29(3):16–20.
Xin Mingliang，Li Maodong，Zhang Shukuan，et al. Researchprogress in failure mode analysis of polyethylene gas pipeline[J].China Plastics，2015，29(3):16–20.
[2]华晔，武志军，熊志敏，等. 聚乙烯(PE) 燃气管道近期发展动态[J]. 全面腐蚀控制，2014(4):34–40.
Hua Ye，Wu Zhijun，Xiong Zhimin，et al. The developing trends of polyethylene(PE) gas piping systems[J]. Total Corrosion Control，2014(4):34–40.
[3]方淯瑜. 聚乙烯(PE)燃气管在中国的应用[J]. 城市燃气, 1995(6):8-11.
Fang Yuyu. Application of polyethylene (PE) gas pipe in China. City Gas, 1995(6):8-11.
[4]胡友良. 烯烃配位聚合催化剂和聚合反应[J]. 石油化工, 2017, 46(6):651-659.
Hu Youliang. Catalysts for olefin coordination polymerization and polymerization reaction[J].Petrochemical Technology, 2017, 46(6):651-659.
[5]宁英男, 姜涛, 张丽. 气相法聚乙烯工艺技术及其催化剂进展[J]. 石化技术与应用, 2008, 26(5):480-485.
Ning Yingnan, Jiang Tao, Zhangli.Progress of gas-phase polyethylene technique and catalyst Petrochemical Technology & Application, 2008, 26(5):480-485.
[6]于茂赏, 高俊刚, 闰明涛. 双峰中密度聚乙烯/高压聚乙烯共混物的流变行为与力学性能[J]. 高分子材料科学与工程, 2003, 19(5):105-111.
Yu Maoshang, Gao Jungang, Run Mingtao. Rheological Behavior and Mechanical Properties of Bimodal Medium Density Polyethylene/Low Density Polyethylene Blends Polymeric Materials Science & Engineering, 2003, 19(5):105-111.
[7] 向明，张博中，蔡燎原，等. 茂金属催化剂及其烯烃聚合研究进展[J].塑料工业，2003，31(4):1-5.
Xiang Ming, Zhang bozhong, Cai Liaoyuan,et al. Research Progress on Metallocene Catalysts and Olefin Polymerization. China Plastic Industry, 2003,31(4):1-5.
[8] Paradies J, Kehr G, Fr?hlich R, et al. Ansa-metallocene polymerization catalysts derived from [2+2]cycloaddition reactions of bis(1-methylethenyl-cyclopentadienyl) zirconium systems[J]. Proceedings of the National Academy of Sciences of the United States of America, 2006, 103(42):15333-7.
[9]唐岩, 李延亮, 王群涛,等. 茂金属催化剂及茂金属聚乙烯现状[J]. 合成树脂及塑料, 2014,31(2):76-80.
Tang Yan, Li Yanliang, Wang Quntao, Pei Xiaojing.Status of metallocene catalyst and its polyethylene products.China Synthetic Resin and Plastics, 2014,31(2):76-80.
[10]高凌雁, 王群涛, 郭锐,等. 国内外茂金属聚乙烯开发现状[J]. 合成树脂及塑料, 2015, 32(4):85-89.
Gao Lingyan, Wang Quntao, Guo Rui,et al. Development Status of Metallocene Polyethylene at Home and Abroad. China Synthetic Resin and Plastics, 2015, 32(4):85-89.
[11] ISO 9080-2012 Plastics piping and ducting systems-Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation.
ISO 9080-2012 塑料管和管道系统--外推法测定热塑管材的长期静液压强度.
[12] ISO 12162-2009 Thermoplastics Materials for Pipes and Fittings for Pressure Applications - Classification, Designation and Design Coefficient.
ISO 12162-2009 热塑性塑料用于压力应用的管道和配件材料分类、名称和设计系数.
[13]张春宇, 李连鹏, 王硕,等. 国内外聚乙烯燃气管材专用料的发展概况[J]. 弹性体, 2013, 23(5):67-73.
Zhang Chunyu, Li Lianpeng, Wang Shuo, et al. Research and application status of special polyethylene pipes for gaseous fuels at home and abroad. China Elastomerics, 2013, 23(5):67-73.
[14]李志宏. 燃气用埋地聚乙烯管材新旧国标GB15558.1对比分析[J]. 工程塑料应用, 2017, 45(6):90-95.
Li Zhihong. Comparison and Analysis of New and Old National Standards GB 15558.1 of Buried Polyethylene Gas Pipe. Engineering plastics application, 2017, 45(6):90-95.
[15]李茂东, 黄国家, 王晓,等. 新标准下燃气用聚乙烯混配料性能要求的变化分析[J]. 广东化工, 2017, 44(7):179-181.
Li Maodong, Huang Guojia, Wang Xiao, et al. Analysis on the Change of Performance Requirement of Polyethylene (PE)Compound for Gaseous Fuels under New Standard.Guangdong Chemical Industry, 2017, 44(7):179-181.
[16]赵启辉, 柯锦玲, 刘斯佳. PE100-RC材料的发展及在燃气管道的应用[J]. 煤气与热力, 2012, 32(7):28-32.
Zhao Qihui, Ke Jinling, Liu Sijia. Development of PE100-RC Material and Its Application in Gas Pipeline. Gas ＆ Heat, 2012, 32(7):28-32.
[17]赵启辉, 黄钊, 柯锦玲. PE100-RC管道专用料的发展及国内应用情况介绍[C]// 全国塑料管道生产和应用技术推广交流会. 2013.
[18]宋科明, 陈国南. 耐开裂PE100-RC及其管道的生产应用[C]// 全国塑料管道生产和应用技术推广交流会. 2013.

燃气管材用聚乙烯专用料的应用发展

Application Progress of Polyethylene-based Special-purpose Materials for Gas Pipe

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 0

编辑推荐

Metrics

本文评价