[1]Borkotoky S S, Dhar P, Katiyar V. Biodegradable poly (lactic acid)/Cellulose nanocrystals (CNCs) composite microcellular foam: Effect of nanofillers on foam cellular morphology, thermal and wettability behavior[J]. International Journal of Biological Macromolecules, 2017, 106:433. [2]Rapp G, Samuel C, Odent J, et al. Peculiar effect of stereocomplexes on the photochemical ageing of PLA/PMMA blends[J]. Polymer Degradation & Stability, 2018, 150:92-104. [3]Scaffaro R, Lopresti F, Botta L. PLA based biocomposites reinforced with Posidonia oceanica, leaves[J]. Composites Part B Engineering, 2018, 139:1-11. [4]李盖禹, 许国志, 季君晖,等. PLA/PBAT 共混体系相容性研究[J]. 中国塑料, 2017, 31(4):51-56. Li Gaiyu,Xu Guozhi,Ji Junhui,et al.Study on Compatibility of Poly(lactic acid)/Poly(butylene adipate-co-terephthalate)Blends[J].China Plastics,2017, 31(4):51-56 [5]桑练勇, 晏华, 代军,等. 聚碳酸亚丙酯/聚乳酸共混物性能研究进展[J]. 中国塑料, 2018(1):7-14. Sang Lianyong,Yan Hua,Dai Jun,et al.Research Progress in Poly( propylene carbonate) /Poly( lactic acid) Blends[J].China Plastics,2018(1):7-14. [6]杜军, 宋永明, 张志军,等. MAH/GMA共接枝聚乳酸对木粉/PLA复合材料性能的影响[J]. 材料工程, 2017, 45(12):30-36. Du Jun,Song Yongming,Zhang Zhijun,et al.Influence of Malefic Anhydride/Glycidyl Methacrylate Cografted Polylactic Acid on Properties of Wood Flour/PLA Composites[J]. Journal of Materials Engineering,2017, 45(12):30-36. [7]Ferreira R T L, Amatte I C, Dutra T A, et al. Experimental characterization and micrography of 3D printed PLA and PLA reinforced with short carbon fibers[J]. Composites Part B Engineering, 2017, 124:88–100. [8]Jing M, Che J, Xu S, et al. The effect of surface modification of glass fiber on the performance of poly(lactic acid) composites: graphene oxide vs. silane coupling agents[J]. Applied Surface Science, 2018, 435. [9]李新功, 郑霞, 吴义强,等. 界面改性对竹纤维增强聚乳酸复合材料性能的影响[J]. 中国塑料, 2013, 27(6):47-51. Li Xingong,Zheng Xia,Wu Yiqiang,et al.Effect of Interface Modification on Properties of Bamboo Fiber Reinforced Poly (lactic acid)Composites[J].China Plastics,2013, 27(6):47-51.. [10]尹兴, 孙诚, 付春英,等. 纳米二氧化钛/聚乳酸抗菌薄膜的制备和性能[J]. 包装工程, 2017, 38(15):36-40. Yin Xing,Sun Cheng,Fu Chunying,et al.Preparation and Properties of Nano-Titanium Dioxide/Polylactic Acid Antibacterial Film[J].Packaging Engineering,2017, 38(15):36-40. [11]叶丹丹, 陆佳琦, 钱天悦,等. 聚乳酸/聚丁二酸丁二醇酯共混物的研究[J]. 中国塑料, 2012(3):23-27. Ye Danan,Lu Jiaqi,Qian Tianyue,et al.Research on Poly (lactic acid) /Poly (butylenes succinate) Blends[J].China Plastics,2012(3):23-27. [12]兰小蓉, 刘正英, 华笋,等. 聚乳酸-聚丁二酸丁二醇酯嵌段共聚体系对聚乳酸熔体流变性能的影响[J]. 高分子材料科学与工程, 2012, 28(4):43-46. Lan Xiaorong,Liu Zhengying,Hua Sun,et al.Effect of Block Copolymers Systems Containing Poly (Lactic Acid )-Block- Poly (Butylene Succinate)on the Rheological Properties of Poly (Lactic Acid)[J].Polymer Materials Science & Engineering,2012, 28(4):43-46. [13]Supthanyakul R, Kaabbuathong N, Chirachanchai S. Poly( l -lactide- b -butylene succinate- b - l -lactide) triblock copolymer: A multi-functional additive for PLA/PBS blend with a key performance on film clarity[J]. Polymer Degradation & Stability, 2017, 142:160-168. [14]Santos F A D, Iulianelli G C V, Tavares M I B. Effect of microcrystalline and nanocrystals cellulose fillers in materials based on PLA matrix[J]. Polymer Testing, 2017, 61. [15]Chaiwutthinan P, Pimpan V, Chuayjuljit S, et al. Biodegradable Plastics Prepared from Poly(lactic acid), Poly(butylene succinate) and Microcrystalline Cellulose Extracted from Waste-Cotton Fabric with a Chain Extender[J]. Journal of Polymers & the Environment, 2015, 23(1):114-125. [16]Hao X, Kaschta J, Pan Y, et al. Intermolecular cooperativity and entanglement network in a miscible PLA/PMMA blend in the presence of nanosilica[J]. Polymer, 2016, 82:57-65. [17]Khankrua R, Pivsa-Art S, Hiroyuki H, et al. Thermal and Mechanical Properties of Biodegradable Polyester/Silica Nanocomposites ☆[J]. Energy Procedia, 2013, 34(40):705-713. [18]苏桂仙, 王佳伟, 李佳,等. PLA/PBS/Nano-SiO2制备及性能研究[J]. 唐山师范学院学报, 2017, 39(5):9-12. Su Guixian,Wang Jiawei,Li Jia,et al.Research on Preparation and Properties of PLA/PBS/Nano-Si02 Composites[J].Journal of Tangshan Normal University,2017, 39(5):9-12. [19]刘晓玲, 王丽丽, 石晓凯,等. 微晶纤维素-二氧化硅杂化体的制备及应用研究[J]. 橡胶工业, 2018(1):5-8. Liu Xiaoling,Wang Lili,Shi Xiaokai,et al.Preparation and Application of Microcrystalline Cellulose-SiO2 Hybrids[J].China Rubber Industry,2018(1):5-8. [20]柏正武, 徐小琴, 金芬芬,等. 纤维素-二氧化硅复合颗粒的制备与表征[J]. 武汉工程大学学报, 2013, 35(2):11-15. Bai Zhengwu,Xu Xiaoqin,Jin Fenfen,et al.Preparation and characterization of cellulose-SiO2 composite beads[J].Journal of Wuhan Institute of Technology,2013, 35(2):11-15. [21]徐文华, 杨智韬, 殷小春,等. 拉伸形变作用下PLA/PBS增韧共混物力学性能研究[J]. 中国塑料, 2016, 30(1):34-38. Xu Wenhua,Yang Zhitao,Yin Xiaochun,et al.Study on Mechanial Properties of PLA/PBS Thoughening Blends Under Tensile Deformation[J].China Plastics,201630(1):34-38. [22]Yan L, Xu Z, Wang X. Influence of nano-silica on the flame retardancy and smoke suppression properties of transparent intumescent fire-retardant coatings[J]. Progress in Organic Coatings, 2017, 112:319-329.
|