[1]G.Tosello,HN. Hansen . S. Gasparin. Applications of dimensional micro metrology to the product and process quality control in manufacturing of precision polymer micro components[J].CIRP Annals - Manufacturing Technology, 2009, 58(1):467-472
[2]Joglekar M, Trewyn BG.Polymer-based stimuli-responsive nanosystems for biomedical applications[J].Biotechnol J, 2013, 8(8):931-945
[3]Wang Xingtian(王兴天).Injection molding technology and injection molding machine[M]. Chemical Industry Press, 2005
[4]Xu Hong(许红).Research on the measurement of polymer melt key parameters based on ultrasonic [D]. Beijing: Beijing University of Chemical and technology, 2012.
[5]Zhang Qiang(张强).Research on online measuring method of repeated precision of polymer injection weight based on ultrasonic technology[D]. Beijing: Beijing University of Chemical and technology, 2016.
[6]蔡文远, 赵世杰, 张锋杰等.注塑机充填压力与产品件重的相关性分析及压力控制应用[J].工程塑料应用, 2004, 32(12):59-61
[7]Cai Wenyuan, Zhao Shijie, Zhang Fengjie, et al.Analysis of pertinence between injection molding pressure and product weight and application of pressure control[J].Engineering Plastics Application, 2004, 32(12):59-61
[8]GB/T 25157-2010, Inspections methods of injection molding machines for rubber and plastics[S].Beijing: China Standards Press, 2010.
[9]张强, 许红, 吴大鸣等.影响制品重量重复精度主要工艺参数实验分析[J].塑料, 2016, 45(6):107-109
[10]Zhang Qiang, Xu Hong, Wu Daming, et al.Experimental analysis on main technological parameters which influences the weight repeatability precision of injection molding products[J].China Plastic, 2016, 45(06):107-109
[11]许红, 吴大鸣, 刘颖等.聚合物熔体密度在线测量在精密注射成型中的应用[J].化工学报, 2012, 63(1):325-330
[12]Xu Hong, Wu Daming, Liu Ying, et al.Application of online measurement of melt density in polymer precise injection molding[J].Journal of Chemical Industry, 2012, 63(1):325-330
[13]张友根.注塑制品件重重复精度的影响因素研究[J].工程塑料应用, 2004, 32(4):32-34
[14]Zhang Yougen.Analysis of factors affecting repeated weight precision of injection molding products[J].Engineering Plastics Application, 2004, 32(4):32-34
[15]Rishi Kumar, Avraam I Isayev.Thermotropic LCPCNF nanocomposites prepared with aid of ultrasonic waves[J].Polymer, 2010, 51(15):3503-3511
[16]Nidal H, Abu-Zahra.Real-time viscosity and density measurements of polymer melts using dialectic and ultrasound sensors fusion[J].Mechatronics, 2004, 14(7):789-803
[17]章锦雷, 陈小强, 庄俭.基于聚合物熔体参数的注射过程保压控制技术[J].塑性工程学报, 2010, 17(3):162-165
[18]Zhang Jinlei, Chen Xiaoqiang, Zhuang Jian.Study on the controlling technology of injection and pressure holding based on PVT diagram[J].塑性工程学报, 2010, 17(3):162-165
[19]韩科, 李增和, 许红等.一种新型聚合物熔体动态密度测量方法的研究[J].中国塑料, 2011, 25(4):98-101
[20]Han Ke,Li Zenghe,Xu Hong, et al.Study on measurement method for dynamic density of polymer melts[J].China Plastic, 2011, 25(4):98-101
[21]傅南红, 郭小龙, 陈邦锋等.全电动超高速注射成型工艺及装备[J].现代塑料加工应用, 2012, 24(3):34-37
[22]Fu Nanhong, Guo Xiaolong, Chen Bangfeng.All-Electric ultra high speed injection molding process and equipments[J].Modern plastic processing and applications, 2012, 24(3):34-37
[23]吴廷, 安瑛, 谢鹏程等.采用型腔压力控制转压点[J]. 塑料, 2010, (5):94-96[J].中国塑料, 2010, 39(5):94-96
[24]Wu Ting, An Ying, Xie Pengcheng, et al.Effecy of packing controlled by cavity temperature on the uniformity of parts’mass[J].China Plastic.2010(5):94-96.[J].China Plastic, 2010, 39(5):94-96
[25]赵洋, 王克俭.超声法表征高密度聚乙烯的和熔融过程[J].高分子材料科学与工程, 2012, 28(11):121-124
[26]Zhao Yang, Wang Kejian.Characterization of PVT and melting process of HDPE by ultrasonic method[J].Polymer Materials Science and Engineering, 2012, 28(11):121-124 |