[1] Ogando J. Fight sinks with external gas assist [J]. Plastics Technology, 1998, 44(8): 45-46.[2] 周应国,董斌斌,陈静波,等. 气体辅助注塑成型充填数值模拟及其实验对比[J]. 高分子材料科学与工程, 2006, 22(5):28-31.Zhou Yingguo, Deng Binbin, Chen Jingbo, et al. Numerical Simulation of the Filling Stage in Gas-Assisted Injection Molding and Contrast to Experiment. Polymer Materials Science & Engineering, 2006, 22(5):28-31.[3] Knights M. External gas molding squeezes out sinks [J]. Plastics Technology, 2001, 47(11): 54-59. [4] Li L M, Lee K K, Suen K W et al. Technical handbook for internal, external and super cool gas-assisted injection molding process [M]. Hong Kong: The Hong Kong Productivity Council Publishers, 2006.[5] Niana S C, Lib M H, Huangb M S. Warpage control of headlight lampshades fabricated using external gas-assisted injection molding[J]. International Journal of Heat and Mass Transfer, 2015, 86(1):358-368.[6] Knights M. Three New Ways to Cut Costs Highlight Injection Molding Conference [C]. Plastics Technology, 2004, 50(5):47-49.[7] 刘东雷,辛勇,孙玲. 薄壁注塑制品成型表观质量控制研究[J]. 中国塑料, 2007, 21(12): 55-60. Liu Donglei, Xin Yong, Sun Ling. Research on the Surface Quality Control of Thin Wall Injection Moulded Parts[J]. China Plastics, 2007,21(12):55-60.[8] 王小新,曹永宁. 基于Moldflow的竖梁基座气体辅助注射成型工艺优化[J].中国塑料, 2017,31(1):75-79. Wang Xiaoxin, Cao Yongning. Optimization of Gas-Assisted Injection-molding Process for Vertical Beam Base Parts Based on Moldflow[J]. China Plastics, 2017,31(1):75-79. [9] Chen S C, Lin Y C,Huang S W. Study on the Packing Effects of External Gas-Assisted Injection Molding on Part Shrinkage in Comparison With Conventional Injection Molding[J]. Polymer Engineering and Science, 2010, 50(11):2085-2092.[10] Jiang Shaofei, Zhang Wei, Zhang Jiabo, et al. Experimental Study on the Influence of Parameters on the Plastic Parts Quality of External Gas-Assisted Injection Molding[J]. Applied Mathematics Information Sciences, 2012, 6(3):665-671. |