[1] 何曼君,陈维孝,董西侠.高分子物理(修订版)[M].上海:复旦大学出版社, 2001.
[2] 李宏福,王淑范,孙海霞,等.连续碳纤维增强尼龙6热塑性复合材料的吸湿及力学性能[J].复合材材料学报, 2018, :1-9
[3] SANG L, WANG C, WANG Y Y, et al.Effects of hydrothermal aging on moisture absorption and property prediction of short carbon fiber reinforced polyamide 6 composites[J].Composites Part B: Engineering, 2018, 153:306-314
[4] DO V-T, NGUYEN-TRAN H-D, CHUN D-M.Effect of polypropylene on the mechanical properties and water absorption of carbon-fiber-reinforced-polyamide-6/polypropylene composite[J].Composite Structures, 2016, 150:240-245
[5] CHEN K J, KANG G Z, LU F C,et al.Effect of relative humidity on uniaxial cyclic softening/hardening and intrinsic heat generation of polyamide-6 polymer[J].Polymer Testing, 2016, 56:19-28
[6] ARHANT M, GAC P-Y L, GALL M L,et al.Effect of sea water and humidity on the tensile and compressive properties of carbon-polyamide 6 laminates[J].Composites Part A: Applied Science and Manufacturing, 2016, 96:250-261
[7] GAC P-Y L, ARHANT M, GALL M L,et al.Yield stress changes induced by water in polyamide 6: Characterization and modeling[J].Polymer Degradation and Stability, 2017, 137:272-280
[8]吕桂英, 朱华, 冯雪松,等.环境湿度对聚酰胺力学性能的影响及其微观机理探讨[J].工程塑料应用, 2006, 34(8):60-63
[9]吴博, 庞承焕.吸水率对尼龙介电强度的影响研究[J].塑料工业, 2010, 38(6):44-46
[10]宁冲冲,崔益华,吴银财,等.降低尼龙制品吸水率的研究进展[J].塑料科技, 2013, 41(1):105-108
[11]梁惠霞,李英,张绍岩.酚醛改性对玻纤增强聚酰胺复合材料耐湿性的影响[J].塑料科技, 2016, 44(10):49-52
[12] FABRE V, QUANDALLE G, BILLON N,et al.Time-Temperature-Water content equivalence on dynamic mechanical response of polyamide6,6[J].Polymer, 2018, 137:22-29
[13] ARHANT M, GAC P-Y L, GALL M L,et al.Modelling the non Fickian water absorption in polyamide 6[J].Polymer Degradation and Stability, 2016, 133:404-412
[14] LIN L, TIMOTHY M WEIGAND, MATTHEW W,et al.. Relative importance of geometrical and intrinsic water transport properties of active layers in the water permeability of polyamide thin-film composite membranes[J].Journal of Membrane Science,2018,564:935-944., 2018, 564:935-944
[15] LAI C C, CHEN S Y, CHEN M H,et al.Preparation and characterization of heterocyclic polyamide 6 (PA 6) with high transparencies and low hygroscopicities[J].Journal of Molecular Structure, 2019, 1175:836-843
[16] LITVINOV V M, KONING C E, TIJSSEN J.The effect of annealing of linear and branched polyamide 46 on the phase composition, molecular mobility and water absorption as studied by DSC, 1H and 2H solid-state NMR[J].Polymer, 2015, 56:406-415
[17] CLAVERIA I, ELDUQUE D, SANTOLARIA J, et al.The influence of environmental conditions on the dimensional stability of components injected with PA6 and PA66[J].Polymer Testing, 2016, 50:15-25
[18]刘爽, 蒋敏, 董华静, 等.尼龙制件吸湿变形及预防措施研究[J].塑料科技, 2007, 35(4):54-56
[19] 张丕念.尼龙制品的尺寸变化及稳定方法[J].塑料工业, 1981, (04):50-54
[20]王兵辉,熊玉竹,吴胜学,等.退火对结晶和拉伸性能的影响[J].工程塑料应用, 2017, 45(1):55-59 |