[1]LI H, ZHANG Y, WANG Y, et al.Effects of thermal histories on carbon fiberpoly-amide 6 micro-composite load transfer efficiency: Crystallization,modulus,and measurement[J].Polymer Composites, 2016, 39(1):100-110[2]张衡, 严飙, 龚友坤.碳纤维机织物增强热塑性树脂复合材料热冲压叠层模型[J].复合材料学报, 2017, 34(12):2741-2746[3]MAKHATADZE G I, PRIVALOV P L.ChemInform Abstract: Thermodynamic Properties of Proteins[J].Cheminform, 2010, 28(2):127-129[4]孙伟, 宋国君, 杨淑静, 等.双螺杆反应挤出制备碳纤维增强尼龙复合材料的研究[J].科学技术与工程, 2009, 9(3):620-623[5]GE S R, ZHANG D K, ZHU H.Mechanical Properties of Carbon Fiber Reinforced Poly-amide 1010 and Its Effect on Friction and Wear[J].Journal of Composite Materials, 2004, 21(2):99-104[6]唐植贤, 王君瑞, 陈林卫, 等.超细滑石粉在不同涂料中的应用及特性[J].上海涂料, 2012, 50(11):52-55[7] 韦璇, 朱晓君.空心玻璃微珠填充环氧复合泡沫材料的制备及性能表征[C]. 中国功能材料及其应用学术会议. 2007.[8]CALCAGNO C I W, MARIANI C M, TEIXEIRA S R, et al.The role of the MMT on the morphology and mechanical properties of the PPPET blends[J].Composites Science & Technology, 2008, 68(10):2193-2200[9]戴建建, 何超雄, 官焕祥.滑石粉填充材料的熔接痕强度研究[J].中国塑料, 2018, 32(11):32-36[10] LIU X, DAI G Z.Study on talc reinforced and toughened glass fiber felt reinforced polypropylene composites. Petrochemical. 2005, 34 (4): 380-383.[J].Petrochemical, 2005, 34(04):380-383[11]SUN C B, XING Y, WANG Q F.Polymer filled with hollow glass microspheres to synthesize deep-sea high-strength buoyancy materials[J].Journal of Beijing University of Science and Technology, 2006, 28(6):554-558[12] 李军伟.PP/PP-g-MAH/HGB复合材料非等温结晶行为研究[J]. 中国塑料, 2011(7):27-31.[J].中国塑料, 2001, 7(7):27-31[13]黄虹, 李道喜, 明浩.空心玻璃微珠对碳纤维增强聚丙烯性能的影响研究[J].工程塑料应用, 2012, 40(4):80-83[14] American Society for Testing and Material.Standard test method for flexural properties of polymer matrix composites material: ASTM D7246-07[S]. Pennsylvania, United States: ASTM International, 2007.[15] American Society for Testing and Material.Standard test method for short-beam strength of polymer matrix composites material and their laminates: ASTM D2344-16[S]. Pennsylvania, United States: ASTM International, 2016.[16] American Society for Testing and Material.Standard test method for determining the lzod pendulum impact resistance of plastics: ASTM D256-10[S]. Pennsylvania, United States: ASTM International, 2010.[17] 吕彦梅, 唐华杰.刚性增韧材料[J]. 塑料科技, 1999(1):33-37.[J].塑料科技, 1999, 1(1):33-37 |