玻璃纤维增强热塑性复合管性能评价方法研究进展

doi:10.19491/j.issn.1001-9278.2019.08.022

中国塑料 ›› 2019, Vol. 33 ›› Issue (8): 136-143.DOI: 10.19491/j.issn.1001-9278.2019.08.022

• 综述 • 上一篇

玻璃纤维增强热塑性复合管性能评价方法研究进展

张兆¹,刘鹏²,徐超²,王大鹏¹,王庆昭¹

1. 山东科技大学
2. 山东科技大学化学与环境工程学院

收稿日期:2019-03-11 修回日期:2019-03-20 出版日期:2019-08-26 发布日期:2019-08-26

Research Progress in Performance Evaluation Methods of Continuous Glass Fiber-reinforced Thermoplastic Composite Pipes

Received:2019-03-11 Revised:2019-03-20 Online:2019-08-26 Published:2019-08-26
Contact: Qing-Zhao WANG E-mail:qzhwang001@126.com

摘要/Abstract

摘要： 综述了连续玻璃纤维增强热塑性塑料复合管（GFT-RTP）的发展状况，介绍了GFT-RTP的结构以及在不同领域的使用要求，分析了GFT-RTP的失效方式和失效机理，包括受力、介质、时间等3个方面，给出了相应的检测项目，以支持GFT-RTP行业的健康发展。

张兆刘鹏徐超王大鹏王庆昭. 玻璃纤维增强热塑性复合管性能评价方法研究进展[J]. 中国塑料, 2019, 33(8): 136-143.

[1]. [2]Koch, G.H.et al, Corrosion Cost and Preventive Strategies in the United States, Technical report number FHWA-RD-01-XXX of the Office of Infrastructure Research and Development, Federal Highway Administration, 25-42, September 30, 2001. [3]张玉川.油气产业用塑料管道技术资料汇编2015[G].北京：国家化学建筑材料测试中心，中国管道商务网，2015:37-52. [4]Zhang Yuchuan.Technical Information on Plastic Pipeline for Oil and Gas Industry 2015 [G]. Beijing: National Chemical Building Materials Testing Center, China Pipeline Business Network, 2015:37-52. [5] International Organization for Standardization.ISO/TS 18226-2006 Plastics pipes and fittings - Reinforced thermoplastics pipe systems for the supply of gaseous fuels for pressures up to 4 MPa (40 bar) [S]. Switzerland:IHS, 2006. [6].DVGW, Verification report VP 642/June 2004. Fibre reinforced PE pipes (RTP) and associated connectors for gas pipes with a operating pressure over 16 bar [7] 国家能源局.SY/T 6662.2-2012 石油天然气工业用非金属复合管第2部分:柔性复合高压输送管[S]. 北京：石油工业出版社，2012. [8]China National Energy Board.Non - metallic composite pipes for oil and gas industry - Part 2: Flexible composite high - pressure piping [S]. Beijing: Petroleum Industry Press, 2012. [9]王大鹏, 刘美苓, 姜焕英, 孙岩, 王庆昭.油气产业用增强热塑性复合管研究进展[J].中国塑料, 2017, 31(07):16-22 [10]Wang Dapeng, Liu Meiling, Jiang Huanying, Sun Yan, Wang Qingzhao.Research Progress of reinforced Thermoplastic Composite Pipe for Oil and Gas Industry[J].China Plastics, 2017, 31(07):16-22 [11]王大鹏, 孙岩, 张友强, 刘美苓, 程全彪, 姜焕英, 王庆昭, 陈建军, 石兵.增强热塑性塑料复合管的现状及进展[J].塑料, 2017, 46(04):69-72 [12]Wang Dapeng, Sun Yan, Zhang Youqiang, Liu Meiling, Cheng Quanbiao, Jiang Huanying, Wang Qingzhao, Chen Jianjun, Shi Bing.The present situation and progress of reinforced thermoplastic composite pipe[J].Plastics, 2017, 46(04):69-72 [13]石油管材专业标准化技术委员会.SY/T 6794-2010, 可盘绕式增强塑料管线管的评定[S].北京：石油工业出版社，2010. [14]Petroleum Pipes Professional Standardization Technical Committee.SY/T 6794-2010 Standard practice for Evaluation of coiled reinforced Plastics Tubes[S].Beijing: Petroleum Industry Press, 2016. [15]张玉川.增强热塑性塑料管RTP技术资料汇编2010[G].北京：国家化学建筑材料测试中心，中国管道商务网，2010:162-163. [16]Zhang Yuchuan.Reinforcement of Thermoplastic Tubes RTP Technical Data 2010 [G]. Beijing: National Chemical Building Materials Testing Center, China Pipeline Business Network, 2010:162-163. [17]青岛海聚新材料科技有限公司.Q/YT001-2016 玻纤带增强聚乙烯复合管材[S]. 青岛：2016. [18]Qingdao high-poly new materials Technology Co., Ltd. Q/YT001-2016 glass fiber reinforced polyethylene composite pipe [S]. Qingdao: 2016. [19]齐国权, 戚东涛, 魏斌, 李厚补, 丁楠, 蔡雪华, 张冬娜.高温高压条件下柔性复合管评价方法研究[J].石油管材与仪器, 2015, 1(05):31-33 [20]Qi Guoquan, Qi Dongtao, Wei Bin, Li Houbu, Ding Nan, Cai Xuehua, Zhang Dongna.Study on Evaluation method of flexible Composite Pipe under High temperature and High pressure[J].Oil pipes and Instruments, 2015, 1(05):31-33 [21] 王庆昭，王大鹏，秦升学等.一种增强复合带及其复合带的制备方法[P].中国，CN103539999B, 2016.01.06. [22]Wang Qingzhao, Wang Dapeng, Qin Shengxue, et al.A method for preparing composite tape and composite tape [P]. China, CN103539999B, 2016.01.06. [23]王庆昭.柔性超高分子量聚乙烯复合管及其制备方法与生产系统[P].中国，CN103574187A，2015.10.21. [24]Wang Qingzhao.Flexible ultra-high molecular weight polyethylene composite pipe and its preparation method and production system [P]. China, CN103574187A, 2015.10.21. [25]王庆昭，王大鹏等.一种玻纤增强带聚乙烯复合管连续化生产装置和方法[P].中国，201610562332.8, 2016.12.07. [26]Wang Qingzhao, Wang Dapeng, et al.A glass fiber reinforced polyethylene composite pipe continuous production equipment and methods [P]. China, 201610562332.8, 2016.12.07. [27]李厚补, 羊东明, 戚东涛, 朱原原, 葛鹏莉, 张志宏.增强热塑性塑料连续管标准现状及发展建议[J].塑料, 2016, 45(04):85-87 [28]Li Houbu, Yang Dongming, Qi Dongtao, et al.Study on the status and development of reinforced plastic continuous pipe standard [J]. Plastics, 2016 (4): 85-87. [29]American Petroleum Institute API RP 15S Qualification of Spoolable Reinforced Plastic Pipe [S]. [30]American Petroleum Institute API 17J 2008.Specification for Unbonded Flexible Pipe [S].US:ANSI, 2008. [31]American Petroleum Institute API 17B Recommended Practice for Flexible Pipe [S].US:ANSI, 2008. [32]American Petroleum Institute API 17K Specification for Bonded Flexible Pipe[S].US:ANSI, 2005. [33]American Petroleum Institute API 15LE Specification for Polyethylene Line Pipe (PE) 1995 [S]. [34]American Petroleum Institute API 15LR Specification for low pressure fiber glass line pipe and fittings [S]. [35] International Organization for Standardization.ISO 18225-2012 Plastics piping systems -- multilayer piping systems for outdoor gas installations -- specifications for systems [S]. UK:BSI, 2012. [36] International Organization for Standardization.ISO 17456-2006 Plastics piping systems -- Multilayer pipes -- Determination of long-term strength [S]. Switzerland:IHS, 2006. [37] American Society for Testing and Materials.ASTM D2513-2016a Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings [S]. ASME：New York, 2016. [38] American Society for Testing and Materials.ASTM D2290-12 Standard Test Method for Apparent Hoop Tensile Strength of Plastic or Reinforced Plastic Pipe [S] [39]. [40] American Society for Testing and Materials.ASTM F2686-2014 Standard Specification for Glass Fiber Reinforced Thermoplastic Pipe [S]. ASME：New York, 2014. [41] American Society for Testing and Materials.ASTM F2896-2011 Standard Specification for Reinforced Polyethylene Composite Pipe For The Transport Of Oil And Gas And Hazardous Liquids [S]. ASME：New York, 2011. [42]SY/T 6769.5-2016 非金属管道设计、施工及验收规范第5部分：纤维增强热塑性塑料复合连续管[S].北京：石油工业出版社，2017. [43]Code for design, construction and acceptance of non-metallic pipelines-part 5: fibre-reinforced thermoplastic composite continuous pipes[S].Beijing: Petroleum Industry Press, 2017. [44]SY/T 6770.5-2016 非金属管材质量验收规范第5部分：纤维增强热塑性塑料复合连续管[S].北京：石油工业出版社，2017. [45].Specification for acceptance of quality of non-metallic tubing-part 5: fibre-reinforced thermoplastic composite continuous tubing [46]石油管材专业标准化技术委员会.SY/T 6662.7-2016 石油天然气工业用非金属复合管第7部分:热塑性塑料内衬玻璃钢复合管[S]. 北京：石油工业出版社，2016. [47]Petroleum Pipes Professional Standardization Technical Committee.SY/T 6662.7-2016 Non - metallic composite pipes for the industrial use in the oil and gas industry - Part 7: Thermoplastic - coated FRP composite pipes [S].Beijing: Petroleum Industry Press, 2016. [48]石油管材专业标准化技术委员会.SY/T 6662.6-2014 石油天然气工业用非金属复合管第6部分:井下用柔性复合连续管及接头[S]. 北京：石油工业出版社，2014. [49]Petroleum Pipes Professional Standardization Technical Committee.SY/T 6662.6-2014 Non-metallic composite pipes for oil and gas industry - Part 6: Flexible composite continuous pipes and joints for underground use[S].Beijing: Petroleum Industry Press, 2014. [50]石油管材专业标准化技术委员会.SY/T 6662.5-2014 石油天然气工业用非金属复合管第5部分:增强超高分子量聚乙烯复合连续管及接头[S]. 北京：石油工业出版社，2014. [51]Petroleum Pipes Professional Standardization Technical Committee.SY/T 6662.5-2014 Non-metallic composite pipes for industrial use in oil and gas industry - Part 5: Reinforced ultra-high molecular weight polyethylene composite continuous pipes and fittings[S].Beijing: Petroleum Industry Press, 2014. [52] 石油管材专业标准化技术委员会.SY/T 6662.4-2014 石油天然气工业用非金属复合管第4部分:钢骨架增强热塑性塑料复合连续管及接头[S]. 北京：石油工业出版社，2014. [53]Petroleum Pipes Professional Standardization Technical Committee.SY/T 6662.4-2014 Non-metallic composite pipes for oil and gas industry - Part 4: Reinforced thermoplastic composite tubes and joints for steel skeleton[S].Beijing: Petroleum Industry Press, 2014. [54] 国家能源局.SY/T 6662.3-2012 石油天然气工业用非金属复合管第3部分：增强MC尼龙管和尼龙-钢复合管[S]. 北京：石油工业出版社，2012. [55]China National Energy Board.Non-metallic composite pipes for industrial use in oil and gas industry - Part 3: Reinforced MC nylon tubes and nylon-steel composite pipes [S]. Beijing: Petroleum Industry Press, 2012. [56] 国家能源局.SY/T 6662.1-2012 石油天然气工业用非金属复合管第1部分:钢骨架增强聚乙烯复合管[S]. 北京：石油工业出版社，2012. [57]China National Energy Board.Non - metallic composite pipes for oil and gas industry - Part 1: Reinforced polyethylene composite pipes for steel frames [S]. Beijing: Petroleum Industry Press, 2012.

玻璃纤维增强热塑性复合管性能评价方法研究进展

Research Progress in Performance Evaluation Methods of Continuous Glass Fiber-reinforced Thermoplastic Composite Pipes

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 0

编辑推荐

Metrics

本文评价