汽车挡风玻璃装饰条对射式双色注塑模具设计

doi:10.19491/j.issn.1001-9278.2019.10.018

中国塑料 ›› 2019, Vol. 33 ›› Issue (10): 100-104.DOI: 10.19491/j.issn.1001-9278.2019.10.018

汽车挡风玻璃装饰条对射式双色注塑模具设计

刘鑫¹,郭恒亚¹,黄明²

1. 浙江工业职业技术学院机械工程学院 2. 郑州大学橡塑模具国家工程研究中心

收稿日期:2019-05-31 修回日期:2019-09-02 出版日期:2019-10-26 发布日期:2019-10-25
基金资助:
国家自然科学基金项目（11432003）、2018年浙江省高校访问工程师校企合作项目（FG2018142）

Design of Opposite-Type Bicolor Injection Mold for Automotive Windshield Decoration Strip

LIU Xin, GUO Hengya,HUANG Ming

1.Zhejiang Industry Polytechnic College 2. NERC for APPZ Zhengzhou University,

Received:2019-05-31 Revised:2019-09-02 Online:2019-10-26 Published:2019-10-25
Contact: LIU Xin E-mail:Lxtomorrow@126.com

摘要/Abstract

摘要： 针对传统的动模旋转垂直转盘式双色模具结构因模具自重而产生倾斜磨耗导致模具运转不顺等问题，设计了一种水平转盘结构对射式双色注塑模具。通过分析汽车挡风玻璃装饰条的产品结构特点和成型工艺，详细设计了该产品的双色热流道塑料模具，并结合双色模具的结构特点，设计了一种斜楔弹簧侧抽芯机构，依靠斜导柱上的缺口来实现硬胶注射时不进行侧向抽芯，软胶注射完成后进行侧向抽芯动作，从而保证产品尺寸精度。最后通过在对射式注塑机上进行实际生产验证，结果表明该模具结构设计合理，能满足客户的生产工艺要求，获得较好的经济效益。

关键词: 汽车挡风玻璃装饰条, 对射式, 双色注塑模具

Abstract: There is inclined wear occurring in the traditional movable mould with a vertically rotating bicolor injection mould structure due to the dead weight of mould, leading to the malfunction of the mould. Aiming at this problem, a horizontal rotating disk bicolor injection mould was designed. a bicolor hot runner plastic mould was designed by analyzing the structure characteristics of products and the molding process of automobile windshield decorative strip. Furthermore, a core-pulling mechanism with inclined wedge spring side was designed by combining with the structure characteristics of the bicolor mould. Such a design relied on the gap on the inclined guide pillar to realize no action of the side core-pulling for the hard rubber injection and immediate action of the side core-pulling for the soft rubber injection, and therefore the high dimension accuracy for products was ensured. Based on the practical production with this opposite-type injection mould, the structural design of this mould was reasonable to meet the requirements for production process and obtain better economic benefits accordingly.

Key words: automobile windshield decorative strip, opposite type, bicolor injection mould

中图分类号:

TQ320.52

刘鑫, 郭恒亚, 黄明. 汽车挡风玻璃装饰条对射式双色注塑模具设计[J]. 中国塑料, 2019, 33(10): 100-104.

LIU Xin, GUO Hengya, HUANG Ming. Design of Opposite-Type Bicolor Injection Mold for Automotive Windshield Decoration Strip[J]. China Plastics, 2019, 33(10): 100-104.

参考文献

[1] 高瑾,周建军. 汽车内饰条多行位脱模机构及双色注塑模具设计[J]. 塑料工业, 2016,44(12): 55–58,64.
GAO J, ZHOU J J. Design of bicolor injection mould and multi-type core pulling mechanism for automotive interior trim[J]. China Plastics Industry,2016,44(12):55–58,64.
[2] 刘庆东.宾利轿车某内饰件双色注塑模具设计[J].中国塑料, 2017,31(8):122-126.
LIU Q D. Design of Bicolor Injection Moulds for an Interior Trim Part in Bentley Automobiles[J].China Plastics,2017,31(8):122-126.
[3] 周建安. 手机背夹电池内盖包胶注射模具设计[J].中国塑料, 2019,33(3):97-100.
ZHOU J A. Design of Injection Encapsulation Mold for Inner Cover of Back Clamp Battery Used for Cell Phone[J].China Plastics, 2019,33(3): 97-100.
[4] 洪建明,苏建光.汽车格栅双色注射模具设计[J].中国塑料,2015,29(7):112-116.
HONG J M,SU J G. Two-component Injection Mould Design for Automobile Grilles[J]. China Plastics,2015,29(7):112-116.
[5] 陆建军,徐伟.玩具手柄双色注塑模具设计[J].现代塑料加工应用,2016,28(4):49-52.
LU J J,XU W. Bicolor Injection Mold Design for Toy Handle[J]. Modern Plastics Processing and Applications,2016,28(4):49-52.
[6] 孟少明,聂慧萍,刘容,等.双色灭菌盒包胶注射模设计[J].现代塑料加工应用,2016(8):53-56.
MENG S M,NIE H P,LIU R, et al. Design of Encapsulated Injection Mould of Two-Color Sterilization Container[J].Modern Plastics Processing and Applications,2016(8):53-56.
[7] 苏慧祎.型芯旋转式双色模具设计[J].工程塑料应用,2015,43(7):87-90.
SU H Y. Design of Double Color Mould with Core Rotary Type[J].Engineer Plastics Application,2015,43(7):87-90.
[8] 张小清. 检测仪手柄平移式双色注塑模具设计[J].工程塑料应用,2018,46(3):76-81.
Zhang X Q. Design of Translational Double Color Injection Mould for Detector Handle[J]. Engineer Plastics Application, 2018,46(3):76-81.
[9] 徐超辉,王涛. 汽车阀体零件热流道双色注塑模具设计[J].中国塑料, 2019,33(3):93-96.
XU C H, WANG T. Design of Hot-runner Bicolor Injection Mold for Valve Body Parts of Automobile[J].China Plastics, 2019,33(3):93-96.
[10] 王臣松,魏波.“背靠背”式双色模具结构及对射式注塑机应用[J].模具制造,2017(8):52–54. WANG C S,WEI B.“Back to back” double color mold structure and application of injection molding machine[J]. Die & Mould Manufacture,2017(8):52–54.

汽车挡风玻璃装饰条对射式双色注塑模具设计

Design of Opposite-Type Bicolor Injection Mold for Automotive Windshield Decoration Strip

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 1

编辑推荐

Metrics

本文评价