输油管道保温技术及应用研究进展

doi:10.19491/j.issn.1001-9278.2019.11.018

中国塑料 ›› 2019, Vol. 33 ›› Issue (11): 99-111.DOI: 10.19491/j.issn.1001-9278.2019.11.018

• 综述 • 上一篇

输油管道保温技术及应用研究进展

徐超¹,张兆¹,刘鹏¹,刘震²,王庆昭¹

1. 山东科技大学化学与环境工程学院 2. 山东中烟工业有限责任公司青岛卷烟厂

收稿日期:2019-05-13 修回日期:2019-06-02 出版日期:2019-11-26 发布日期:2019-12-27

Research Progress in Technology of Oil Pipeline Insulation and Its Applications

XU Chao¹, ZHANG Zhao¹, LIU Peng¹, LIU Zhen², WANG Qingzhao¹

1.College of Chemical & Environmental Engineering, Shandong University of Science and Technology,Qingdao 266590,China;
2.Qingdao Cigarette Factory of Shandong Zhongyan Industry Co,Ltd,Qingdao 266101,China

Received:2019-05-13 Revised:2019-06-02 Online:2019-11-26 Published:2019-12-27
Contact: Qing-Zhao WANG E-mail:qzhwang001@126.com

摘要/Abstract

摘要： 综述了国内外各类保温材料和保温管道结构的技术现状及应用研究进展；分析了不同保温材料的隔热性能、力学性能、微观结构等特点，包括实心保温材料、无机及有机发泡材料、复合保温材料和相变储能材料；介绍了各类结构的输油管道的加工工艺、结构设计等特点，包括管中管结构、单壁管、技术管系统和复合保温软管；并对目前保温输油管道的材料及结构的应用和发展进行了讨论。

关键词: 输油管道, 保温材料, 管道结构, 性能分析

Abstract: The technical status and application research progress of various insulation materials and insulation pipe structures in China and abroad were reviewed; The thermal insulation properties, mechanical properties and microstructure of different thermal insulation materials were analyzed,including solid insulation materials, inorganic and organic foam materials, composite insulation materials and phase change energy storage materials;introduced the processing technology and structural design of oil pipelines of various structures,including tube tube structure, single wall tube, technical tube system and composite insulation hose.The application and development of the materials and structures of the current insulated pipelines were discussed.

Key words: oil pipeline, insulation material, pipe structure, performance analysis

中图分类号:

TE973

徐超张兆刘鹏刘震王庆昭. 输油管道保温技术及应用研究进展[J]. 中国塑料, 2019, 33(11): 99-111.

XU Chao, ZHANG Zhao, LIU Peng, LIU Zhen, WANG Qingzhao. Research Progress in Technology of Oil Pipeline Insulation and Its Applications[J]. China Plastics, 2019, 33(11): 99-111.

参考文献

[1]陈丰民.采油五厂埋地集输管道保温技术研究[D].大庆石油学院, 2003.
[2]王小路, 黄晋, 张友寿, 龙威, 夏露, 李四年.耐火保温材料现状及发展[J].耐火材料, 2016, 50(01):75-80
[3]WANG X L, HUANG J, ZHANG Y T, LONG W, XIA L, LI S N.Current Status and Development of Refractory Insulation Materials[J].Refractories, 2016, 50(01):75-80
[4]刘昌领, 罗晓兰, 刘亚磊, 段梦兰.深水采油树输油管道保温设计[J].油气储运, 2013, 32(11):1237-1242
[5]LIU C L, LUO X L, LIU Y L, DUAN M L.Insulation Design of Deep Water Tree Oil Pipeline[J].Oil & Gas Storage and Transportation, 2013, 32(11):1237-1242
[6]吴剑飞.高炉渣纤维制备建筑保温板及其性能优化[D].河北联合大学, 2013.
[7]廉卫珍.石化管道用无溶剂防腐隔热涂料的制备与性能研究[D].华南理工大学, 2017.
[8]钱泳源.硬质聚氨酯泡沫塑料用于原油集输油管道防腐保温[J].塑料工业, 1976, (06):41-46
[9]QIANG Y Y.Rigid Polyurethane Foam Used for Anti-Corrosion Insulation of Crude Oil Gathering Pipeline[J].China Plastics Industry, 1976, (06):41-46
[10]毛溶胤.大口径输油管道首次应用硬质聚氨酯泡沫塑料十四年[J].油田地面工程, 1985, 4(06):17-20
[11]MAO R Y.Large-diameter Oil Pipelines Have Been Applied to Rigid Polyurethane Foam for 14 Years[J].Oilfield Surface Engineering, 1985, 4(06):17-20
[12]Sanghoon Kim, Hyunho Shin, et al.Calibration of hyperelastic and hyperfoam constitutive models for an indentation event of rigid polyurethane foam[J].Composites Part B: Engineering, 2019, 163:297-302
[13]张晓灵, 吴文通, 杨加栋, 孔瑞林, 蒋晓斌, 杜宝银.海底管道硬质聚氨酯泡沫保温材料导热性能试验研究[J].石油工程建设, 2012, 38(05):46-48
[14]ZHANG X L, WU W T, YANG J D, KONG R L, JIANG X B, DU B Y.Experimental Study on Thermal Conductivity of Submarine Pipe Rigid Polyurethane Foam Insulation[J].Petroleum Engineering Construction, 2012, 38(05):46-48
[15]王通, 李宏伟.埋地管道硬质聚氨酯泡沫防腐蚀保温层保温失效判断方法[J].腐蚀与防护, 2010, 31(07):565-567
[16]武应涛.海底输油管道保温技术现状及进展[J].化学推进剂与高分子材料, 2008, 06(06):22-25
[17]WU Y T.Current Status and Progress of Submarine Oil Pipeline Insulation Technology[J].Chemical Propellants & Polymeric Materials, 2008, 06(06):22-25
[18]Natthapong Chuaponpat, Surat Areerat.The Effects of Foaming Conditions on Plasticized Polyvinyl Chloride Foam Morphology by using Supercritical Carbon Dioxide[J].Materialstoday:Proceedings, 2018, 5(11):23526-23533
[19]王啟锋, 杜竹玮, 陈先, 李浩然, 孙春宝.环氧树脂基固体浮力材料的研制及表征[J].精细化工, 2005, (03):174-176
[20]WANG Q F, DU Z W, CHEN X, LI H R, SUN C B.Development and Characterization of Epoxy Resin-Based Solid Buoyancy Materials[J].Fine Chemical, 2005, (03):174-176
[21]Stefani P M, Barchi A T, Sabugal J, el al.Characterizationg of epoxy foams[J].Joumal of Applied Polymer Science, 2003, 90(11):2992-2996
[22]Wan Hamad W N F, Peileng T, Keat Y C.Effect of acetic acid as catalyst on the properties of epoxy foam[J].Polymer-Plastics Technology and Engineering, 2013, 52(8):754-760
[23]Takiguchi O, Ishikawa D, Sugimoto M.Effect of rheological behavior of epoxy during precuring on foaming [J].Journal of Applied Polymer Science, 2008, 110(02):657-662
[24]Keping Chen, Chunrong Tian, Ai Lu, Qiuming Zhou, Xiaorong Jia, Jianhua Wang.Effect of SiO2 on rheology, morphology, thermal, and mechanical properties of high thermal stable epoxy foam[J].Journal of Applied Polymer Science, 2014, 131(7):2113-2124
[25]王毅, 胡瑞生, 黄斌, 蒋团辉, 王醴均, 何力.轻质环氧树脂微孔发泡材料的力学及隔热性能[J].工程塑料应用, 2016, 44(10):17-21
[26]WANG Y, HU R S, HUANG B, JIANG T H, WANG LJ, HE L.Mechanical and Thermal Insulation Properties of Lightweight Epoxy Resin Microcellular Foaming Materials[J].Engineering Plastics Application, 2016, 44(10):17-21
[27]樊勋, 张广成, 李建通, 张鸿鸣.增韧环氧树脂微孔发泡研究[J].工程塑料应用, 2017, 45(04):53-58
[28]PAN X, ZHANG G C, LI J T, ZHANG H M.CTBN Toughened Epoxy Resin Microcellular Foaming[J].Engineering Plastics Application, 2017, 45(04):53-58
[29]王致中, 高光弟.廉价材料及复合材料在保温工程中的应用进展[J].石油工程建设, 1991, (02):34-35
[30]WANG Z Z, GANG G D.Progress in the Application of Cheap Materials and Composite Materials in Thermal Insulation Engineering[J]..Petroleum Engineering Construction, 1991, (02):34-35
[31]毛世杰.玻璃微珠在塑料改性中的应用方法探讨[J].橡塑技术与装备, 2016, 42(24):55-56
[32]MAO S J.Discussion on Application Methods of Glass Beads in Plastic Modification[J].China RubberPlastics Technology and Equipment, 2016, 42(24):55-56
[33]冯春亮.油管内衬用耐磨隔热高分子复合材料的制备和性能[D].扬州大学, 2018.
[34]CHEN H, TANG B.Surface modification of fire-retardant asphalt with silane coupling agent[J].J Wuhan Univ Technol Mater Sci Ed, 2012, 27(2):310-315
[35]陈金伟.空心玻璃微珠聚丙烯复合材料的制备及隔热性能研究[J].中国资源综合利用, 2018, 36(11):173-175
[36]CHENG J W.Preparation and Thermal Insulation Properties of Hollow Glass BeadsPolypropylene Composites[J].China Resources Comprehensive Utilization, 2018, 36(11):173-175
[37]GUPTA N, WOLDESENBET E, MENSAH P.Compression properties of syntactic foams:Effect of cenosp-here radi-us ratio and specimen aspect ratio[J].Composites Part A, 2004, 35(1):103-111
[38]WOUTERSON E M, BOEY F Y C, HU X, et al.Specific properties and fracture toughness of syntactic foam:effect of foam microstructures[J].Compos Sci Technol, 2005, 65(11-12):1840-1850
[39]王晓东.环氧树脂基轻质隔热复合材料制备及隔热机理研究[D].哈尔滨工程大学, 2017.
[40]杨加栋, 张晓灵, 吴文通, 孔瑞林, 杜宝银.海洋输油管道复合聚氨酯保温材料研制[J].热固性树脂, 2015, 30(04):36-39
[41]YANG J D, ZHANG X L, WU W T, KONG R L, DU B Y.Development of Composite Polyurethane Insulation Material for Marine Oil Pipeline[J].Thermosetting Resin, 2015, 30(04):36-39
[42]GUO Q Z, et al.Transparent, Superflexible Doubly Cross-Linked Polyvinylpolymethylsiloxane Aerogel Superinsulators via Ambient Pressure Drying[J].ACS Na no, 2018, 12(1):521-532
[43]杨镇源, 张玉良, 李荣勋.二氧化硅气凝胶改性热塑性聚氨酯弹性体材料的制备及性能研究[J].塑料科技, 2019, 47(03):21-25
[44]YANG Z Y, ZAHNG Y L, LI R X.Preparation and Properties of Silica Aerogel Modified Thermoplastic Polyurethane Elastomers[J].Plastics Science and Technology, 2019, 47(03):21-25
[45]李明宝.气凝胶复合保温结构在长输蒸汽管道上的应用[A]. 中国能源学会.2014集中供热优化运行系统节能技术交流研讨会论文集[C].中国能源学会:北京中能联创信息咨询有限公司, 2014:5.
[46]WONG J C H, KAYMAK H, TINGAUT P, et al.Mechanical and thermal properties of nanofibrillated cellulose reinforced silica aerogel composites[J].Microporous and Mesoporous Materials, 2015, 217:150-158
[47]蒋晓斌, 相政乐, 张晓灵, 顾艳.气凝胶型海洋保温管道[J].管道技术与设备, 2011, (04):52-54
[48]JIANG X B, XIANG Z L, ZHANG X L, GU Y.Aerogel-type Marine Insulation Pipe[J].Pipeline Technique and Equipment, 2014, (04):52-54
[49]穆承广, 王殿学, 许彦博, 郭旭, 等.气凝胶高效保温材料在站场地上管道应用的经济性分析[J].石油石化节能, 2017, 7(04):3-7
[50]MU C G, WANG D X, XU Y B, GUO X, et al.Economic Analysis of Pipeline Application on Aerogel Efficient Insulation Materials at Station Sites[J].Energy Conservation in Petroleum & Petrochemical Industry, 2017, 7(04):3-7
[51]方云.潜热储能相变砂浆的制备及性能研究[D].浙江工业大学, 2015.
[52]费鹏飞.以多孔材料为载体的复合相变制备及性能研究[D].天津：天津工业大学, 2012
[53]Hallot R, Pionetti F R.Device for thermal insulation of at least a submarine pipeline comprising a phase-change material confined in jackets: US, US7896033[P]. 2011
[54]Cho K, Choi S H.Themal characteristics of paraffin in a spherical capsule cluring freezing and melting processes[J].International Journal of Heat and Mass Transter, 2000, 43(n):8183-3196
[55]张子君.月桂酸输油管道保温材料的合成与性能研究[D].浙江海洋大学, 2018.
[56]蒋林林, 韩文礼, 张红磊, 王伟.聚氨酯保温管“管中管”成型工艺及质量控制[J].天然气与石油, 2011, 29(03):61-63
[57]JIANG L L, HAN W L, ZHANG H L, WANG W.Molding Process and Quality Control of "Pipe in Tube" of Polyurethane Insulation Pipe[J].Natural Gas and Oil, 2011, 29(03):61-63
[58]相政乐, 蒋晓斌, 张晓灵, 杜宝银, 杨加栋.海底保温管道技术发展概况[J].国外油田工程, 2010, 26(10):56-59
[59]XIANG Z L, JIANG X B, ZHANG X L, DU B Y, YANG J D.Overview of the Development of Submarine Insulation Pipe Technology[J].Foreign Oilfield Engineering, 2010, 26(10):56-59
[60]高志涛, 代志双, 宋平娜, 陈星.海洋输油管道保温技术研究进展[J].江苏船舶, 2015, 32(01):25-27
[61]GAO Z T, DAI Z S, SONG P N, CHEN X.Research Progress on Thermal Insulation Technology of Marine Oil Pipelines[J].Jiangsu Ship, 2015, 32(01):25-27
[62]李英, 刘志龙, 丁鹏龙, 杨树耕.卷管法安装海洋管中管的有限元分析[J].天津大学学报自然科学与工程技术版, 2015, 48(05):438-444
[63]LI Y, LIU Z L, DING P L, YANG S G.Finite Element Analysis of the Installation of Marine Tubes by Coiled Tube Method[J].Journal of Tianjin University(Science and Technology), 2015, 48(05):438-444
[64]新慧.石油管道局管道防腐保温“管中管”技术和热收缩套的研究[J].石油学报, 1986, (01):82-82
[65]XIN H.Study on the " Tube-in-Tube" Technology And Heat-shrink Sleeve of Pipeline anti-Corrosion Insulation in Petroleum Pipeline Bureau[J].Acta Petrolei Sinica, 1986, (01):82-82
[66]詹玉宏, 李培瑞.管中管在长吉输油管道上的应用[J].油气储运, 2000, (08):35-36
[67]ZHAN Y H, LI P R.Application of Tube-in-Tube in Changji Oil Pipeline[J].Gas Storage and Transportation, 2000, (08):35-36
[68]田英辉.单重保温海底管道理论分析及试验研究[D].天津大学, 2007.
[69]曹静.国外单重保温管道应用介绍[EB].北京:中海石油研究中心. 2007.
[70]Lou Watkins, Elmer Hershey.Syntactic foam thermal insulation for ultra-deepwater oil and gas pipelines[C].Offshore Technology Conference.Houston, TexasUSA, 30 April-3 May, 2002.
[71]Bart van Belle, Emerson.Advances in high-temperature syntactic foam technology for offshore systems[C].Offshore Technology Conference. Houston, Texas USA, 6-9 May, 2002.
[72]李爱贵, 韩文礼, 张红磊.海底集束管道系统的腐蚀与防护[J].全面腐蚀控制, 2011, 25(01):42-45
[73]LI A G, HAN W L, ZHANG H L.Corrosion and Protection of Submarine Cluster Piping System[J].Total Corrosion Control, 2011, 25(01):42-45
[74]姚志广.基于极限状态设计法的集束管道设计[A]. 中国造船工程学会近海工程学术委员会.2009年度海洋工程学术会议论文集（下册）[C].中国造船工程学会近海工程学术委员会:中国造船工程学会, 2009:6.
[75]宋儒鑫.海洋集束管道——油田内部输送的一种精明解决方案[A]. 中国造船工程学会近海工程学术委员会.2003年度海洋工程学术会议论文集[C].中国造船工程学会近海工程学术委员会:中国造船工程学会, 2003:16.
[76]高志涛, 代志双, 宋平娜, 陈星.海洋输油管道保温技术研究进展[J].江苏船舶, 2015, 32(01):25-27
[77]GAO Z T, DAI Z S, SONG P N, CHEN X.Research Progress on Thermal Insulation Technology of Marine Oil Pipelines[J].Jiangsu Ship, 2015, 32(01):25-27
[78]孟德军, 张荫纳.海洋复合保温软管保温性能实验[J].油气储运, 2015, 34(08):901-904
[79]MEMG D J, ZHANG Y N.Marine Composite Insulation Hose Insulation Performance Experiment[J].Oil & Gas Storage and Transportation, 2015, 34(08):901-904

输油管道保温技术及应用研究进展

Research Progress in Technology of Oil Pipeline Insulation and Its Applications

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 2

编辑推荐

Metrics

本文评价

[1]	王雅珍, 常海洋, 何子健, 王旭, 王凤超. MG-MUF包覆阻燃EPS泡沫及力学性能研究[J]. 中国塑料, 2015, 29(12): 29-33 .
[2]	王勇王向东李莹. 挤塑聚苯乙烯泡沫塑料(XPS)的主要性能及应用领域分析[J]. 中国塑料, 2011, 25(08): 75-80 .