表面改性CNF对PBS/PLA共混物的湿热老化行为的影响

doi:10.19491/j.issn.1001-9278.2019.12.004

中国塑料 ›› 2019, Vol. 33 ›› Issue (12): 16-22.DOI: 10.19491/j.issn.1001-9278.2019.12.004

表面改性CNF对PBS/PLA共混物的湿热老化行为的影响

朱艳，张奇锋，贾仕奎^*，赵中国，陈立贵，曹乐

陕西理工大学材料科学与工程学院

收稿日期:2019-08-19 修回日期:2019-08-31 出版日期:2019-12-26 发布日期:2020-01-17
基金资助:
国家自然科学基金项目（51703121）;中国博士后科学基金特别资助项目（2018T111050）

Effects of Surface-Modified Nanocellulose on Hygrothermal Aging Behavior of PLA/PBS Blends

ZHU Yan，ZHANG Qifeng，JIA Shikui^*，ZHAO Zhongguo, CHEN Ligui, CAO Le

School of Materials Science and Engineering, Shaanxi University of Technology

Received:2019-08-19 Revised:2019-08-31 Online:2019-12-26 Published:2020-01-17
Contact: Shi-Kui JIA E-mail:shikuijia@snut.edu.cn

摘要/Abstract

摘要： 以硅烷偶联剂KH550对纳米纤维素(CNF)进行表面改性，利用双螺杆挤出机熔融共混制备一系列聚丁二酸丁二醇脂(PBS)/CNF母粒改性聚乳酸(PLA)复合材料，并在湿热老化试验箱中进行老化试验。通过扫描电子显微镜、广角X射线衍射仪、差示扫描量热仪、偏光显微镜等对复合材料的结晶和力学性能进行测试。结果表明,CNF可作为异相成核剂改善PLA的结晶行为，使PLA的结晶度提高；改性后，PBS/CNF复合母粒与PLA基体之间的相容性有较大改善；老化36 h后，PLA/PBS/CNF-KH550复合材料结晶进一步完善，其结晶度、拉伸强度和断裂伸长率较老化前分别提高了28.15 %、5.54 %和8.23 %。

Abstract: Nanocellulose (CNF)was surface-modified by a silane coupling agent, KH550, and then a poly(butylene succinate)(PBS)/modified CNF masterbatch was prepared by melt blending with a twin-screw extruder. A series of poly(lactic acid)(PLA)/PBS/CNF blends were prepared by melt compounding with the obtained masterbatch, and their hygrothermal aging performance was characterized in a damp heat aging test chamber. The crystallization and mechanical properties of the blends were investigated by SEM, WAXD, DSC, polarizing microscope and universal testing machine. The results indicated that CNF could act as a nucleating agent to improve the crystallinity of PLA. The compatibility between the PLA matrix and PBS/CNF masterbatch was improved greatly due to the surface modification. The blends achieved an increase in degree of crystallinity by 28.15 %, in tensile strength by 5.54 % and in elongation at break by 8.23 % after aging for 36 h.

朱艳, 张奇锋, 贾仕奎, 赵中国, 陈立贵, 曹乐. 表面改性CNF对PBS/PLA共混物的湿热老化行为的影响[J]. 中国塑料, 2019, 33(12): 16-22.

ZHU Yan, ZHANG Qifeng, JIA Shikui, ZHAO Zhongguo, CHEN Ligui, CAO Le. Effects of Surface-Modified Nanocellulose on Hygrothermal Aging Behavior of PLA/PBS Blends[J]. China Plastics, 2019, 33(12): 16-22.

参考文献

[1] 闫冬雪, 戢觅之, 王柯, 等. 可降解型聚丁二酸丁二醇酯/聚乳酸原位成纤增强复合材料[J]. 高分子材料科学与工程, 2014, 30(02): 95-99.
Yan D Y, Ji M Z, Wang K, et al. In-Situ Microfibrillation and Mechanical Reinforcement of Degradable Poly(Butylene Succinate)/Poly(Lactic Acid)Blend[J]. Polymer Materials Science & Engineering, 2014, 30(02): 95-99.
[2] 郜菲菲, 刘立志. PBAT/PLA共混物的热力学性能和结晶性能的研究[J]. 塑料工业, 2019, 47(06): 86-91.
Gao F F, Liu L Z. Study on Thermodynamic and Crystallization Properties of PBAT/PLA Blends[J]. China Plastics Industry, 2019, 47(06): 86-91.
[3] 周健辉, 孙玲, 马跃, 等. 聚酰胺66/改性耐热聚乳酸共混物的力学性能和结晶行为[J]. 中国塑料, 2019, 33(03): 32-37.
Zhou J H, Sun L, Ma Y, et al. Mechanical Properties and Crystallization of PA66/Modified PLA Blends[J]. China Plastics, 2019, 33(03): 32-37.
[4] 赛华捷, 王翔宇, 刘烨, 等. PLA/PBAT/OMMT纳米复合材料的制备及其结构与性能研究[J]. 中国塑料, 2018, 32(07): 52-57.
Sai H J, Wang X Y, Liu Y, et al. Preparation, Microstructure and Performance of PLA/PBAT/OMMT Nanocomposites[J]. China Plastics, 2018, 32(07): 52-57.
[5] 贾仕奎, 王忠, 朱艳, 等. 聚乳酸/聚氨酯共混物的力学行为与形态研究[J]. 中国塑料, 2017, 31(03): 35-39.
Jia S K, Wang Z, Zhu Y, et al. Mechanical Behaviors and Morphology Evolution of Poly (lactic acid)/Thermoplastic Polyurethane Blends[J]. China Plastics, 2017, 31(03): 35-39.
[6] Nampoothiri K M, Nair N R, John R P. An overview of the recent developments in polylactide (PLA) research[J]. Bioresource Technology, 2010, 101: 8493-8501.
[7] 陈文婷, 李子芬, 彭少贤. 反应共混增韧全生物降解PLA/PBS复合材料[J]. 塑料, 2019, 48(03): 94-99.
Chen W T, Li Z F, Peng S X. Preparation of High-Toughness and Biodegradable PLA/PBS Blends by Reaction Blending[J]. Plastics, 2019, 48(03): 94-99.
[8] Bhatia A , Gupta R K , Bhattacharya S N , et al. An investigation of melt rheology and thermal stability of poly(lactic acid)/ poly(butylene succinate) nanocomposites[J]. Journal of Applied Polymer Science, 2009, 114(5):2837-2847.
[9] 陈祥辉, 黄汉雄. 低含量聚乳酸对微孔发泡聚丁二酸丁二醇酯泡孔结构的改善[J]. 高分子学报, 2017(08): 1331-1338.
Chen X H, Huang H X. Improving Cellular Structure of Microcellular Poly(butylene succinate) via Adding Low Content of Poly(lactic acid)[J]. Acta Polymerica Sinica, 2017(08): 1331-1338.
[10] Chuayjuljit S, Wongwaiwattanakul C, Chaiwutthinan P, et al. Biodegradable poly(lactic acid)/ poly(butylene succinate)/wood flour composites: Physical and morphological properties[J]. Polymer Composites, 2017, 38(12): 2841-2851.
[11] 李根, 刘跃军, 谭海英, 等. 微晶纤维素/聚丁二酸丁二醇酯复合材料的流变行为[J]. 复合材料学报, 2017, 34(01): 210-216.
Li G, Liu Y J, Tan H Y, et al. Rheological behavior of microcrystalline cellulose/poly(butylene succinate) composites[J]. Acta Materiae Compositae Sinica, 2017, 34(01): 210-216.
[12]兰小蓉, 刘正英, 华笋, 等. 聚乳酸-聚丁二酸丁二醇酯嵌段共聚体系对聚乳酸熔体流变性能的影响[J]. 高分子材料科学与工程, 2012, 28(04): 43-46.
Lan X R, Liu Z Y, Hua S, et al. Effect of Block Copolymers Systems Containing Poly(Lactic Acid)-Block- Poly(Butylene Succinate)on the Rheological Properties of Poly(Lactic Acid)[J]. Polymer Materials Science & Engineering, 2012, 28(04): 43-46.
[13] 李明珠, 李大纲, 邓巧云, 等. 纳米纤维素/聚乳酸复合材料的制备与研究[J]. 塑料工业, 2012, 40(07): 17-20.
Li M Z, Li D G, Deng Q Y, et al. Preparation and Study on Nano-fibers/PLA Composites[J]. China Plastics Industry, 2012, 40(07): 17-20.
[14] 王瑶, 何连诚, 柴菁珊, 等. 纳米SiO2包覆微晶纤维素对PLA/PBS复合材料性能的影响[J].中国塑料, 2018, 32(08): 25-32.
Wang Y, He L C, Chai J S, et al. Effect of Nano-SiO2 Wrapping on Microcrystalline Cellulose on the Properties of PLA/PBS Composites[J]. China Plastics, 2018, 32(08): 25-32.
[15] 史军华, 姚进, 李知函, 等. 改性纳米纤维素/聚乳酸复合材料的制备及性能[J/OL]. 精细化工: 1-9[2019-08-05].https://doi.org/10.13550/j.jxhg.20190114.
Shi J H, Yao J, Li Z H, et al. Preparation and Performance of Modified Cellulose Nanocrystal/Poly(Lactic Acid) Composite Materials[J/OL]. Fine Chemicals: 1-9[2019-08-05].https://doi.org/10.13550/j.jxhg.20190 114.
[16] 曹乐, 贾仕奎, 张奇锋, 等. 湿热对RGO/PEG/PLA复合材料结晶及力学性能的影响[J]. 塑料工业, 2019, 47(05): 111-116.
Cao L, Jia S K, Zhang Q F, et al. Effects of Hygrothermal Aging on Crystallization and Mechanical Properties of RGO/PEG/PLA Composites[J]. China Plastics Industry, 2019, 47(05): 111-116.
[17] 黄亚江, 叶林, 廖霞, 等. 复杂条件下高分子材料老化规律、寿命预测与防治研究新进展[J]. 高分子通报, 2017(10): 52-63.
Huang Y J, Ye L, Liao X, et al. The Degradation Behavior, Service Lifetime Prediction and Stabilization Strategy of Polymeric Materials under Complex Condition[J]. Polymer Bulletin, 2017(10): 52-63.
[17] 李茂东, 辛明亮, 史君林, 等. 老化环境下压力容器用塑料力学性能变化规律研究[J]. 塑料工业, 2018, 46(01): 82-86.
Li M D, Xin M L, Shi J L, et al. Variation of Mechanical Properties of Plastics Used in Pressure Vessels under Aging Conditions[J]. China Plastics Industry, 2018, 46(01): 82-86.
[18] 张也, 佟毅, 李义, 等. 聚乳酸/聚丁二酸丁二醇酯/二氧化碳基热塑性聚氨酯三元薄膜的制备与性能研究[J]. 塑料工业, 2018, 46(01): 99-103.
Zhang Y, Tong Y, Li Y, et al. Study on Preparation and Properties of PLA/PBS/Thermoplastic Poly (propylene carbonate) Polyurethane Blown Films[J]. China Plastics Industry, 2018, 46(01): 99-103.

表面改性CNF对PBS/PLA共混物的湿热老化行为的影响

Effects of Surface-Modified Nanocellulose on Hygrothermal Aging Behavior of PLA/PBS Blends

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 0

编辑推荐

Metrics

本文评价