[1] Al-Mosawe A, Al-Mahaidi R, Zhao X L. Effect of CFRP properties, on the bond characteristics between steel and CFRP laminate under quasi-static loading [J]. Construction and Building Materials, 2015, 98: 489-501.[2] Chowdhury N T, Wang J, Chiu W K, et al. Matrix failure in composite laminates under tensile loading [J]. Composite Structures, 2016, 135: 61-73.[3] Nurprasetio I P, Budiman B A, Aziz M. Evaluation of bonding strength and fracture criterion for aluminum alloy–woven composite adhesive joint based on cohesive zone model [J]. International Journal of Adhesion and Adhesives, 2018, 85: 192-201.[4] DOT/ FAA/ AR- TN06/ 57. Best Practice in Adhesive-Bonded Structures and Repairs [R]. U. S. Department of Transportation, Federal Aviation Administration, 2007.[5] 李传习, 罗南海, 柯璐, 等. 胶膜连接CFRP板-钢搭接接头室温条件的力学性能试验[J/OL]. 复合材料学报: 1- 9[2019-08-28]. https://doi.org/10.13801/j.cnki.fhclxb.20190528.001.Li Chuanxi, Luo Nanhai, Ke Lu, et al. Experimental study on the CFRP laminate-steel lap joints connected with a film adhesive at room temperature[J/OL]. Acta Materiae Compositae Sinica:1-9[2019-08-28]. https://doi.org/10.13801/j.cnki.fhclxb.20190528.001.[6] Bamberg P A M G P, Reisgen U, Schiebahn A, et al. Digital Image Correlation Analysis Of The Effects Of The Overlap Length, Adhesive Thickness And Adherends Yield Strength Over Similar And Dissimilar Joints Of High Strength Steel And Aluminum Alloys[J]. International Journal of Adhesion and Adhesives, 2018, 83: 69-75.[7] Seong M, Kim T, Nguyen K, et al. A parametric study on the failure of bonded single-lap joints of carbon composite and aluminum[J]. Composite Structures, 2008, 86(1-3): 135-145.[8] JR E D R, GUESS T R. Interface corner failure analysis of joint strength: Effect of adherend stiffness[J]. International Journal of Fracture, 1997, 88: 305-314.[9] Reis P N B, Ferreira J A M, Antunes F. Effect of adherend’s rigidity on the shear strength of single lap adhesive joints[J]. International Journal of Adhesion and Adhesives, 2011, 31(4): 193-201. |