乙丙嵌段共聚物相对分子质量及链结构对PP/EPR共混体系结构与性能的影响

doi:10.19491/j.issn.1001-9278.2020.01.005

中国塑料 ›› 2020, Vol. 34 ›› Issue (1): 22-28.DOI: 10.19491/j.issn.1001-9278.2020.01.005

乙丙嵌段共聚物相对分子质量及链结构对PP/EPR共混体系结构与性能的影响

张博文¹,刘喜军¹,杨奇²,张金弟³,张悦⁴,张春雨²,张学全⁵

1. 齐齐哈尔大学材料科学与工程学院
2. 中国科学院长春应用化学研究所高性能合成橡胶及其复合材料重点实验室
3. 营口市向阳催化剂有限责任公司
4. 埃克森美孚亚太研发有限公司
5. 中国科学院长春应用化学研究所

收稿日期:2019-07-25 修回日期:2019-09-01 出版日期:2020-01-26 发布日期:2020-01-17
基金资助:
国际合作项目

Effects of Molecular Weight and Chain Structure of Ethylene?propylene Block Copolymers on Structure and Performance of PP/EPR Blends

Received:2019-07-25 Revised:2019-09-01 Online:2020-01-26 Published:2020-01-17
Contact: Xijun LIU E-mail:liuxijun2002@126.com；liuxijun2002@163.com

摘要/Abstract

摘要： 设计合成了一系列不同相对分子质量和乙烯平均序列长度的乙丙嵌段共聚物（EP），并将其作为聚丙烯（PP）/二元乙丙橡胶（EPR）共混体系的增容剂，考察了EP用量、相对分子质量及乙烯平均序列长度对共混体系性能及分散相形态演变的影响。结果表明，EP增容PP/EPR体系时存在最佳添加量，少量EP的加入可有效提高PP/EPR共混体系的抗冲击性能，并对分散相尺寸及形态起到良好的调控作用；同时，EP的相对分子质量越大对共混体系的冲击性能提高越明显，EP的组成与EPR越接近，对共混体系的增容效果越明显。

Abstract: A series of ethylene?propylene block copolymers (EP) with different molecular weights and average sequence length of ethylene monomer units were designed and synthesized by using slurry polymerization process and then used as a compatibilizer for polypropylene (PP)/ethylene?propylene rubber (EPR) blends. The effects of the content and molecular weight of block copolymer on the performance and the evolution of dispersed phase of the blends were investigated. The results indicated that there was an optimum content of EP for compatibilization in the PP/EPR blending system. The addition of EP in a small amount could efficiently control the size and morphology of dispersed phase and therefore enhanced the impact strength of the blends significantly. Meanwhile, the higher molecular weight for EP was beneficial to the impact performance of the blends. The similarity in the composition of EP and EPR was crucial to the compatibilization effect for PP/EPR blends.

张博文刘喜军杨奇张金弟张悦张春雨张学全. 乙丙嵌段共聚物相对分子质量及链结构对PP/EPR共混体系结构与性能的影响[J]. 中国塑料, 2020, 34(1): 22-28.

参考文献

[1]STEHLING F C, HUFF T, SPEED C S, et al.Structure and Properties of Rubber-Modified Polypropylene Impact Blends[J].Journal of Applied Polymer Science, 1981, 26(8):2693-2711
[2]COPPOLA F, GRECO R, MARTUSCELLI E, et al.Mechanical Properties and Morphology of Isotactic PolypropyleneEthylene-Propylene Copolymer Blends[J].Polymer, 1987, 28(1):47-56
[3]YOKOYAMA Y, RICCO T.Toughening of Polypropylene by Different Elastomeric Systems[J].Polymer, 1998, 39(16):3675-3681
[4]NITTA K, KAWADA T, YAMAHIRO M, et al.Polypropylene-Block-Poly (Ethylene-co-Propylene) Addition to PolypropylenePoly (Ethylene-co-Propylene) Blends: Morphology and Mechanical Properties[J].Polymer, 2000, 41(18):6765-6771
[5]JANG G S, CHO W J, HA C S, et al.Morphology,Crystallization Behavior and Properties of Impact-Modified Polypropylene Copolymer with or Without Sodium Benzoate as a Nucleating Agent[J].Colloid and Polymer Science, 2002, 280(5):424-431
[6]郑智焕，付梓阳，杨丽庭，等.高模量高抗冲聚丙烯复合材料的制备及性能研究[J].中国塑料, 2017, 31(06):46-53
[7] CHEN F, SHANGGUAN Y G, JIANG Y S, et al.Toughening With Little Rigidity Loss and Mechanism for Modified Polypropylene by Polymer Particles with Core-Shell Structure[J]. Polymer, 2015, 65: 81-92.[J].Polymer, 2015, 65(65):81-92
[8]EAGAN J M, XU J, GIROLAMO R D, et al.Combining Polyethylene and Polypropylene: Enhanced Performance With PEiPP Multiblock Polymers[J].Science, 2017, 355(6327):814-816
[9]CRETON, COSTANTINO.Molecular Stitches for Enhanced Recycling of Packaging[J].Science, 2017, 355(6327):797-798
[10] FENG Z L, DONG L S, ZHANG B L, et al.Investigation of PP-EPR Diblock Copolymer as Compatibilizer for PP/EPT Blend[J]. Polymer Communications, 1985, 3: 216-225.[J].Polymer Communications, 1985, 3(3):216-225
[11]LO?PEZ-BARRO?N C R, TSOU A H.Strain Hardening of PolyethylenePolypropylene Blends via Interfacial Reinforcement with Poly (ethylene-cb-propylene) Comb Block Copolymers[J].Macromolecules, 2017, 50(7):2986-2995
[12]NOJIRI S, KIMATA S, IKEDA K, et al.Novel Supramolecular Block Copolymer of Isotactic Polypropylene and Ethylene-co-propylene Connected by Complementary Quadruple Hydrogen Bonding System[J].Macromolecules, 2017, 50(15):5687-5694
[13]张春晖，上官勇刚，谭业强，等.抗冲共聚聚丙烯及其级分的流变学研究[J].高等学校化学学报, 2012, 33(02):430-436
[14]祝方明，杨益嘉，林尚安.单茂钛甲基铝氧烷催化剂乙烯丙烯共聚合研究[J].高分子学报, 2005, 1(3):413-416
[15]YANG J H, ZHANG Y, ZHANG Y X.Brittle-ductile Transition of PPPOE Blends in Both Impact and High Speed Tensile Tests[J].Polymer, 2003, 44(17):5047-5052
[16]JANG B Z, UHLMANN D R, SANDE J B V.Rubber-Toughening in Polypropylene[J].Journal of Applied Polymer Science, 1985, 30(6):2485-2504
[17]ZHANG C H, SHANGGUAN Y G, CHEN R F, et al.Morphology,Microstructure and Compatibility of Impact Polypropylene Copolymer[J].Polymer, 2010, 51(21):4969-4977
[18]ZHU W, ZHANG X Q, FENG Z L, et al.Effect of Ethylene-Propylene Copolymer with Residual PE Crystallinity on Mechanical Properties and Morphology of PPHDPE Blends[J].Journal of Applied Polymer Science, 1995, 58(3):551-557
[19]MAZIDI M M, AGHJEH M K R.Effects of Blend Composition and Compatibilization on the Melt Rheology and Phase Morphology of Binary and Ternary PPPA6EPDM Blends[J].Polymer Bull, 2015, 72(8):1975-2000
[20]WALLHEINKE K, HECKMANN W, P?TSCHKE P, et al.Localizing Compatibilizers in Immiscible Blends By SEM[J].Polymer Testing, 1998, 17(4):247-255
[21]FU X M, LIU X J, ZHANG C Y, et al.Synthesis of Propylene-co-Styrenic Monomer Copolymers via Arylation of Chlorinated PP and Their Compatibilization for PPPS Blend[J].Polymers, 2019, 11(1):157-169
[22]GREIN C, BERNREITNER K, GAHLEITNER M.Potential and Limits of Dynamic Mechanical Analysis as a Tool for Fracture Resistance Evaluation of Isotactic Polypropylenes and Their Polyolefin Blends[J].Journal of Applied Polymer Science, 2004, 93(4):1854-1867
[23] SHANGGUAN Y G, CHEN F, YANG J, et al.A New Approach to Fabricate Polypropylene Alloy with Excellent Low-Temperature Toughness and Balanced Toughness-Rigidity Through Unmatched Thermal Expansion Coefficients Between Components[J]. Polymer, 2017, 112: 318-324.[J].Polymer, 2017, 112(112):318-324

乙丙嵌段共聚物相对分子质量及链结构对PP/EPR共混体系结构与性能的影响

Effects of Molecular Weight and Chain Structure of Ethylene?propylene Block Copolymers on Structure and Performance of PP/EPR Blends

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 0

编辑推荐

Metrics

本文评价