| [1]刘吕花, 郑延延, 张丽芳, 等.硬组织植入聚醚醚酮表面生物活性改性研究[J].中国塑料, 2018, 32(11):7-18[2]LIU Lyuhua, ZHENG Yanyan, ZHANG Lifang, et al.Research Progress in Bioactive Enhancement of Polyetheretherketone by Surface Modifications for Hard[J].China Plastics, 2018, 32(11):7-18[3]Alexakou E, Damanaki M, Zoidis P, et al.PEEK High Performance Polymers: A Review of Properties and Clinical Applications in Prosthodontics and Restorative Dentistry[J].The European Journal of Prosthodontics and Restorative Dentistry, 2019, 27(3):113-121[4]文怀兴, 刘杏, 陈威.聚醚醚酮复合材料的改性研究及应用进展[J].工程塑料应用, 2017, 45(01):123-127[5]Wen Huaixing, Liu Xing, Chen Wei.Review on Modification Research and Application of PEEK Composites[J].Engineering Plastics Application, 2017, 45(01):123-127[6]Swolfs Y, Verpoest I, Gorbatikh L.Recent advances in fibre-hybrid composites: materials selection,opportunities and applications[J].International Materials Reviews, 2019, 64(4):181-215[7]宋传江, 王虎.玻璃纤维增强复合材料工程化应用进展[J].中国塑料, 2015, 29(3):9-15[8]Song Chuanjiang, Wang Hu.Engineering Application Research of Glass Fiber Reinforced Composite Materials[J].China Plastics, 2015, 29(3):9-15[9]Kessentini A, Ahmed G M S, Madiouli J.Design Optimization and FE Analysis of 3D Printed Carbon PEEK Based Mono Leaf Spring[J].Micromachines, 2019, 10(2795):218-222[10]Mishra S, Chowdhary R.PEEK materials as an alternative to titanium in dental implants: A systematic review[J].Clinical Implant Dentistry and Related Research, 2019, 21(1):208-222[11]李嘉宁.钛合金激光熔覆Ti-Al/陶瓷复合涂层组织结构与耐磨性的研究[D].山东大学, 2012.[12]Zhang Y, Li Y, Hu Y, et al.Localized Self-Growth of Reconfigurable Architectures Induced by a Femtosecond Laser on a Shape-Memory Polymer[J].Advanced Materials, 2018, 30(49):18-32[13]Ligon S C, Liska R, Stampfl J, et al.Polymers for 3D Printing and Customized Additive Manufacturing[J].Chemical Reviews, 2017, 117(15):10212-10290[14]Attar H, Ehtemam-Haghighi S, Kent D, et al.Nanoindentation and wear properties of Ti and Ti-TiB composite materials produced by selective laser melting[J].Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 2017, 688:20-26.[15]Wang X, Jiang M, Zhou Z, et al.3D printing of polymer matrix composites: A review and prospective[J].Composites Part B-Engineering, 2017, 110:442-458.[16]Sorini C, Chattopadhyay A, Goldberg R K.Micromechanical modeling of the effects of adiabatic heating on the high strain rate deformation of polymer matrix composites[J].Composite Structures, 2019, 215:377-384.[17]Barile C, Casavola C, De Cillis F.Mechanical comparison of new composite materials for aerospace applications[J].Composites Part B-Engineering, 2019, 162:122-128.[18]Garcia-Moreno I, Angel Caminero M, Patricia Rodriguez G, et al.Effect of Thermal Ageing on the Impact and Flexural Damage Behaviour of Carbon Fibre-Reinforced Epoxy Laminates[J].Polymers, 2019, 11(801):132-141[19]Ma Y Q, Liu X M, Wang J, et al.Effect of pressure-free heating curing time on bending property of 2D T700E44 composites prepared by ICM[J].Materials Research Express, 2019, 6(0453074):12-14[20]Matsuzaki R, Yokoyama R, Kobara T, et al.Multi-objective curing optimization of carbon fiber composite materials using data assimilation and localized heating[J].Composites Part A-Applied Science and Manufacturing, 2019, 119:61-72.[21]Romero M, Fernandez-Francos X, Ramis X.Sequential heat release: an innovative approach for the control of curing profiles during composite processing based on dual-curing systems[J].Polymer International, 2019, 68(3):527-545[22]向炳东, 李敏, 李艳霞, 等.筒状复合材料制件热压罐成型温度模拟及影响因素分析[J].航空学报, 2017, 38(11):298-307[23]Xiang Bingdong, Li Min, Li Yanxia, et al.Numerical simulation and parameter analysis of temperature distribution of autoclave cured composite cylindrical structure[J].Acta Aeronautica et Astronautica Sinica, 2017, 38(11):298-307[24]杨康.复合材料热压罐成型工装变形分析[D].沈阳航空航天大学, 2017.[25]杨攀.碳纤维复合材料热固化变形规律研究[D].沈阳航空航天大学, 2017.[26]刘怡, 朱光明.纤维增强树脂基复合材料固化工艺的发展[J].中国塑料, 2018, 32(06):1-9[27]Liu Yi, Zhu Guangming.Development of Curing Process for Fiber-reinforced Resin Matrix Composites[J].China Plastics, 2018, 32(06):1-9[28]Choi H, Phuong T N, In J B.Laser transmission welding and surface modification of graphene film for flexible supercapacitor applications[J].Applied Surface Science.2019, 483:481-488.[29]Hopmann C, Boelle S, Kreimeier S.Modeling of the thermally induced residual stresses during laser transmission welding of thermoplastics[J].Welding in The World.2019, 63(5): 1417-1429.[30]焦俊科, 王强, 昝少平, 等.碳纤热塑复合材料激光连接技术研究进展[J].航空制造技术, 2016, 514(19):24-29[31]JIAO Junke, WANG Qiang, ZAN Shaoping, et al.Research Progress on CFRTP Laser Joining Technology[J].Aeronautical Manufacturing Technology, 2016(19):24-29.[32]Peeters D, Clancy G, Oliveri V, et al.Concurrent design and manufacture of a thermoplastic composite stiffener[J].Composite Structures.2019, 212:271-280.[33]Stokes-Griffin C M, Kollmannsberger A, Compston P, et al.The effect of processing temperature on wedge peel strength of CF/PA6 laminates manufactured in a laser tape placement process[J].Composites Part A-Applied Science And Manufacturing.2019, 121: 84-91.[34]Stokes-Griffin C M, Compston P.The effect of processing temperature and placement rate on the short beam strength of carbon fibre-PEEK manufactured using a laser tape placement process[J].Composites Part A-Applied Science and Manufacturing, 2015, 78:274-283.[35]Yassin K, Hojjati M.Processing of thermoplastic matrix composites through automated fiber placement and tape laying methods A review[J].Journal of Thermoplastic Composite Materials, 2018, 31(12):1676-1725[36]Clancy G, Peeters D, Oliveri V, et al.A study of the influence of processing parameters on steering of carbon Fibre/PEEK tapes using laser-assisted tape placement[J].Composites Part B-Engineering, 2019, 163:243-251.[37]沈镇, 秦滢杰, 陈书华, 等.炭纤维聚醚醚酮复合材料的激光原位成型工艺探究[J].固体火箭技术, 2019, 42(02):229-233[38]Shen Zhen, Qin Yingjie, Chen Shuhua, et al.Study on the laser in-situ winding process of carbon fiber reinforced PEEK composite[J].Journal of Solid Rocket Technology, 2019, 42(02):229-233[39]Bandaru A K, Clancy G, Peeters D, et al.Properties of a thermoplastic composite skin-stiffener interface in a stiffened structure manufactured by laser-assisted tape placement with in situ consolidation[J].Composite Structures, 2019, 214:123-131.[40]KAGAN V A P.Laser Transmission Welding of semicrystalline thermoplastics: Part II: Analysis of mechanical performance of welded nylon[J].Journal of Reinforced Plastics & Composites, 2004, 23(1):95-107[41]Jaeschke P, Herzog D, Haferkamp H, et al.Laser transmission welding of high-performance polymers and reinforced composites - a fundamental study[J].Journal of Reinforced Plastics & Composites, 2010, 29(20):3083-3094[42]Chen M, Zak G, Bates P J.Description of transmitted energy during laser transmission welding of polymers[J].Welding in the World, 2013, 57(2):171-178[43]Amanat N, Chaminade C, Grace J, et al.Optimal process parameters for thermoplastic polyetheretherketone joints fabricated using transmission laser welding and Lumogen (R) IR absorptive pigment[J].Journal of Laser Applications, 2011, 23(0120031):176-182[44]Kim K, Kim P, Lee J, et al.Non-Destructive Identification of Weld-Boundary and Porosity Formation During Laser Transmission Welding by Using Optical Coherence Tomography[J].Ieee Access, 2018, 6:76768-76775.[45]Villar M, Garnier C, Chabert F, et al.In-situ infrared thermography measurements to master transmission laser welding process parameters of PEKK[J].Optics and Lasers in Engineering, 2018, 106:94-104.[46]Wang H, Yang K, Liu L.The analysis of welding and riveting hybrid bonding joint of aluminum alloy and polyether-ether-ketone composites[J].Journal of Manufacturing Processes, 2018, 36:301-308.[47]Guo L, Qiu J.Combination of cloud manufacturing and 3D printing: research progress and prospect[J].International Journal of Advanced Manufacturing Technology, 2018, 96(5-8):1929-1942[48]林鑫, 黄卫东.高性能金属构件的激光增材制造[J].中国科学:信息科学, 2015, 45(09):1111-1126[49]Lin Xin, Huang Weidong.Laser additive manufacturing of high-performance metal components[J].Scientia Sinica Informationis, 2015, 45(09):1111-1126[50]Tong Z, Ren X, Jiao J, et al.Laser additive manufacturing of FeCrCoMnNi high-entropy alloy: Effect of heat treatment on microstructure, residual stress and mechanical property[J].Journal of Alloys and Compounds, 2019, 785:1144-1159.[51]Zhang J, Wu Y, Cheng X, et al.Study of microstructure evolution and preference growth direction in a fully laminated directional micro-columnar TiAl fabricated using laser additive manufacturing technique[J].Materials Letters, 2019, 243:62-65.[52]洪腾蛟.纤维增强复合材料熔融沉积成型增材制造装备研发[D].安徽科技学院, 2017.[53]Liu S, Shin Y C.Additive manufacturing of Ti6Al4V alloy: A review[J].Materials & Design, 2019, 164(UNSP 107552):173-184[54]Li N, Huang S, Zhang G, et al.Progress in additive manufacturing on new materials: A review[J].Journal of Materials Science & Technology, 2019, 35(2):242-269[55]Touri M, Kabirian F, Saadati M, et al.Additive Manufacturing of Biomaterials - The Evolution of Rapid Prototyping[J].Advanced Engineering Materials, 2019, 21(18005112):24-29[56]田宗军, 顾冬冬, 沈理达, 等.激光增材制造技术在航空航天领域的应用与发展[J].航空制造技术, , 480(11):38-42[57]Tian Zongjun, Gu Dongdong, Shen Lida, et al.Application and Development of Laser Additive Manufacturing Technology in Aeronautics and Astronautics[J].Aeronautical Manufacturing Technology.2015(11):38-42.[58]Gwalani B, Soni V, Waseem O A, et al.Laser additive manufacturing of compositionally graded AlCrFeMoVx (x=0 to 1) high-entropy alloy system[J].Optics and Laser Technology, 2019, 113:330-337.[59]Hoskins T J, Dearn K D, Kukureka S N.Mechanical performance of PEEK produced by additive manufacturing[J].Polymer Testing, 2018, 70:511-519.[60]Yazdani B, Chen B, Benedetti L, et al.A new method to prepare composite powders-customized for high temperature laser sintering[J].Composites Science and Technology, 2018, 167:243-250.[61]Bartolomeu F, Buciumeanu M, Costa M M, et al.Multi-material Ti6Al4V & PEEK cellular structures produced by Selective Laser Melting and Hot Pressing: A tribocorrosion study targeting orthopedic applications[J].Journal of The Mechanical Behavior of Biomedical Materials, 2019, 89:54-64.[62]Li F, Macdonald N P, Guijt R M, et al.Increasing the functionalities of 3D printed microchemical devices by single material,multimaterial,and print-pause-print 3D printing[J].Lab on A Chip, 2019, 19(1):35-49[63]陈小明, 王海金, 周夏凉, 等.激光表面改性技术及其研究进展[J].材料导报, 2018, 32(S1):341-344[64]Chen Xiaoming, Wang Haijin, Zhou Xialiang, et al.Laser Surface Modification Technology and Research Progress[J].Materials Reports.2018, 32(S1):341-344.[65]刘学青.干法刻蚀辅助飞秒激光加工技术研究[D].吉林大学, 2017.[66]Huang Y, Tang F, Guo Z, et al.Accelerated ICP etching of 6H-SiC by femtosecond laser modification[J].Applied Surface Science, 2019, 488:853-864.[67]Kundu A, Rani R, Hazra K S.Controlled nanofabrication of metal-free SERS substrate on few layered black phosphorus by low power focused laser irradiation[J].Nanoscale, 2019, 11(35):16245-16252[68]李平雪, 辛承聪, 高健, 等.皮秒激光加工研究进展与展望[J].激光与红外, 2018, 48(10):1195-1203[69]Li Ping-xue, Xin Chengcong, Gao Jian, et al.Research progress and development of picosecond laser processing[J].Laser & Infrared, 2018, 48(10):1195-1203[70]Tsuka H, Morita K, Kato K, et al.Effect of laser groove treatment on shear bond strength of resin-based luting agent to polyetheretherketone (PEEK)[J].Journal of Prosthodontic Research, 2019, 63(1):52-57[71]Akkan C K, Hammadeh M, Brück S, et al.Plasma and short pulse laser treatment of medical grade PEEK surfaces for controlled wetting[J].Materials Letters, 2013, 109(1):261-264[72]Hammouti S, Beaugiraud B, Salvia M, et al.Elaboration of submicron structures on PEEK polymer by femtosecond laser[J].Applied Surface Science, 2015, 327:277-287.[73]Zhang C, Zhang G, Vincent J I, et al.Microstructure and mechanical properties of flame-sprayed PEEK coating remelted by laser process[J].Thermal Spray Technology, 2009, 66(3):248-253[74]Romoli L, Fischer F, Kling R.A study on UV laser drilling of PEEK reinforced with carbon fibers[J].Optics & Lasers in Engineering, 2012, 50(3):449-457[75]胡明旺.《中国制造2025》支撑中华民族伟大复兴——《中国制造2025》起草组组长、规划编制负责人、工业和信息化部原党组副书记、副部长苏波权威解读《中国制造2025》[J].装备制造, 2015(09):52-63.[76]Hu Mingwang.< Made in China 2025> supports the great rejuvenation of the Chinese nation -- the leader of the drafting group of < Made in China 2025> , the person in charge of planning, the deputy secretary of the former party group of the Ministry of Industry and Information Technology, the deputy minister Su Bo authoritative interpretation of " Made in China 2025" [J].Equipment Manufacturing, 2015(09):52-63. |
京公网安备11010802034965号
京ICP备13020181号-2
