水驱动弹丸辅助注塑管件壁厚的弹丸影响

doi:10.19491/j.issn.1001-9278.2021.01.010

中国塑料 ›› 2021, Vol. 35 ›› Issue (1): 60-66.DOI: 10.19491/j.issn.1001-9278.2021.01.010

水驱动弹丸辅助注塑管件壁厚的弹丸影响

王彦卿¹, 匡唐清¹(), 赖家美², 冯强¹, 刘文文¹

^1.华东交通大学机电与车辆工程学院，南昌 330013
^2.南昌大学机电工程学院聚合物成型研究室，南昌 330031

收稿日期:2020-07-23 出版日期:2021-01-26 发布日期:2021-01-22
基金资助:
国家自然科学基金项目(51563010);江西省自然科学基金项目(20181BAB206014)

Effect of Projectile on Residual Wall Thickness of Water⁃projectile⁃assisted Injection Molded Pipes

WANG Yanqing¹, KUANG Tangqing¹(), LAI Jiamei², FENG Qiang¹, LIU Wenwen¹

^1.School of Mechanical & Electrical Engineering，East China Jiaotong University，Nanchang 330013，China
^2.Polymer Processing Research Lab，School of Mechanical and Electric Engineering，Nanchang University，Nanchang 330031，China

Received:2020-07-23 Online:2021-01-26 Published:2021-01-22
Contact: KUANG Tangqing E-mail:tkuang@ecjtu.edu.cn

摘要/Abstract

摘要：

对水驱动弹丸辅助注塑（W-PAIM）中弹丸对管件壁厚的影响进行了实验与分析。通过搭建实验平台研究了弹丸的材质、头部形状、直段长度、截面尺寸这4个因素对聚丙烯（PP）的W-PAIM管件残余壁厚的影响。结果表明，在聚酰胺6（PA6）、丙烯腈?丁二烯?苯乙烯共聚物（ABS）、聚四氟乙烯（PTFE）、PP 4种弹丸材质中PA6弹丸成型的管件的残余壁厚于比其他材质弹丸成型管件更加均匀，质量更好；在半球形、抛物线形、圆弧形及锥体形的4种头部形状中抛物线形能获得较好的质量管件；直段区长度为7 mm，截面尺寸为13 mm的弹丸所制得的管件残余壁厚最均匀，质量最佳。

关键词: 水驱动弹丸辅助注塑, 弹丸, 残余壁厚, 管件

Abstract:

An experimental study was carried out to investigate the effect of the projectile on the wall thickness of pipe fitting in the water-projectile-assisted injection molding（W-PAIM）. Through constructing an experimental platform， the effect of the four factors including the projectile material， head shape， straight length and cross-sectional size on the residual wall thickness of the W-PAIM polypropylene （PP） pipe fittings were studied. A comparative experiment showed that the residual wall thickness of the pipe fitting formed by the PA6 projectile was more uniform than those of the PA6， ABS and PTFE projectiles， indicating the optimum quality. Among the heads with the hemispherical， parabolic， arc and conical shapes， the parabolic head achieved the optimum quality fittings. For the projectile with a length of 7 mm in straight section and a section size of 13 mm， the obtained residual wall thickness was the most uniform and the quality of the molded pipe fitting was the best.

Key words: water-projectile-assisted injection molding, projectile, residual wall thickness, pipe

中图分类号:

TQ 320.66

王彦卿, 匡唐清, 赖家美, 冯强, 刘文文. 水驱动弹丸辅助注塑管件壁厚的弹丸影响[J]. 中国塑料, 2021, 35(1): 60-66.

WANG Yanqing, KUANG Tangqing, LAI Jiamei, FENG Qiang, LIU Wenwen. Effect of Projectile on Residual Wall Thickness of Water⁃projectile⁃assisted Injection Molded Pipes[J]. China Plastics, 2021, 35(1): 60-66.

参考文献 6

1	LIN K Y， LIU S J. The Influence of Processing Parameters on Fingering Formation in Fluid⁃Assisted Injection⁃Molded Disks［J］. Polymer Engineering & Science， 2009， 49（11）： 2 257⁃2 263.
2	LIN K Y， LIU S J. Morphology of Fluid Assisted Injection Molded Polycarbonate/Polyethylene Blends［J］. Macromolecular Materials and Engineering， 2010， 295（4）： 342⁃350.
3	KNIGHTS M. Water Injection Molding Makes Hollow Parts Faster， Lighter［J］. Plastics Technology， 2002， 48（4）： 42⁃47.
4	LIU S， CHEN Y. Water⁃assisted Injection Molding of Thermoplastic Materials： Effects of Processing Parameters［J］. Polymer Engineering & Science， 2003， 43（11）： 1 806⁃1 817.
5	郑建华，瞿金平，周南桥. 水辅助注射成型技术研究进展［J］. 工程塑料应用， 2003， 31（7）： 65⁃68.
	ZHENG J H， QU J P， ZHOU N Q. Research Progress of Water⁃assisted Injection Molding Technology［J］. Engineering Plastics Application， 2003， 31（7）： 65⁃68
6	IIDA I. Manufacture of Hollw Body： JP， H04208425［P］.1992⁃07⁃30.

[1]	袁知焕, 匡唐清, 赖家美, 柳和生, 徐盼. 工艺参数对聚丙烯/聚酰胺6共混物水辅助共注塑管件壁厚及性能的影响[J]. 中国塑料, 2021, 35(11): 77-83.
[2]	丁永跃, 吴志峰, 王志伟. 冷却方式对聚乙烯管件性能的影响[J]. 中国塑料, 2020, 34(9): 22-26.
[3]	陈爱平. 45 °弯头管件注塑模设计[J]. 中国塑料, 2015, 29(07): 117-120 .
[4]	叶俊文;万雨龙;容伟结. 燃气用聚乙烯管道系统产品的国内外标准研究[J]. 中国塑料, 2015, 29(05): 94-100 .
[5]	陈英龙周华张增猛孔虎子. 水辅与气辅成型残余壁厚的对比研究[J]. 中国塑料, 2012, 26(06): 71-75 .

水驱动弹丸辅助注塑管件壁厚的弹丸影响

Effect of Projectile on Residual Wall Thickness of Water⁃projectile⁃assisted Injection Molded Pipes

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献 6

相关文章 5

编辑推荐

Metrics

本文评价