关键词: 聚醚砜, 多孔微球, 孔隙率, 静电喷雾, 亲水性

Abstract: The focus of this work is to effectively control the porosity of microspheres prepared via electrospraying, which would establish the foundation for the following application. Scanning electron microscopy (SEM) and thermogravimetry (TG) were employed to evaluate the morphology and the porosity of microspheres, respectively. According to the investigation result, adding hydrophilic polymer polyethylene glycol (PEG) and polyving akohol (PVA) to electrosprayed solution could effectively control the porosity of microspheres. Specifically: adding hydrophilic polymer could improve porosity; and that, with increasing hydrophilic polymer, the porosity of porous microspheres first increased and then decreased; the control effect of PVA for the porosity of microspheres was better than that of PEG, when the addition of PVA was 3 %, the porosity of microspheres was the highest value of 91.35 %.

Key words: plolyether sulfone, porous microsphere, porosity, electrospraying, hydrophilicity