基于LabvIEW的多通道注塑机数据采集系统开发

doi:10.19491/j.issn.1001-9278.2009.02.022

中国塑料 ›› 2009, Vol. 23 ›› Issue (02): 98-103 .DOI: 10.19491/j.issn.1001-9278.2009.02.022

• 机械与模具 • 上一篇

基于LabvIEW的多通道注塑机数据采集系统开发

陈清培，闫宝瑞，杨于光，张安震

1．北京化工大学机电学院，北京，100029； 2．宁波海天塑机集团有限公司，宁波，浙江，315821

收稿日期:2008-10-07 修回日期:1900-01-01 出版日期:2009-02-26 发布日期:2009-02-26

The Development of Multi-Channel Data Acquisition System Based on LabVIEW for Plastic Injection Moulding Machine

Chen Qingpei, Yan Baorui, Yang Yuguang, Zhang Anzhen

1．College of Mechanical and Electronical Engineering, Beijing University of Chemical Technology, Beijing, 100029,China2．Ningbo Haitian Plastics Machinery Group Co.,Ltd, Ningbo, Zhejiang,315821,China

Received:2008-10-07 Revised:1900-01-01 Online:2009-02-26 Published:2009-02-26
Contact: Chen Qingpei,

摘要/Abstract

摘要： 开发了一套多功能、多通道通用的数据采集系统，该系统以美国NI公司的M系列数据采集卡、信号调理器以及研华工控机作为硬件平台，软件开发采用Labview图形化编程语言。系统将一些关键配置参数开放给用户，大大提高了系统的通用性。实验结果表明，该系统具有界面友好、操作方便、测量效率高的特点，测量精度高和稳定性好，可以应用于注塑机的动态参数采集和监测中。

Abstract: Based on National Instruments’ M-series data collection card, Signal Conditioning module, and Advantech IPC, a multi-function, multi-channel universal data collection system was developed. The software of the system employed Labview graphical programming language. Using opening configuration parameters, the universality of the system was greatly improved. The system exhibited characteristics of good interface, easy operation, and high measuring efficiency, as well as high measuring accuracy and good stability. It could be used to collect and monitor dynamic parameters of plastic injection molding machine.

Key words: Plastic injection mounding machine, Multi-Channel, Data acquisition system, Labview

陈清培, 闫宝瑞, 杨于光, 张安震. 基于LabvIEW的多通道注塑机数据采集系统开发[J]. 中国塑料, 2009, 23(02): 98-103 .

Chen Qingpei, Yan Baorui, Yang Yuguang, Zhang Anzhen. The Development of Multi-Channel Data Acquisition System Based on LabVIEW for Plastic Injection Moulding Machine[J]. China Plastics, 2009, 23(02): 98-103 .

基于LabvIEW的多通道注塑机数据采集系统开发

The Development of Multi-Channel Data Acquisition System Based on LabVIEW for Plastic Injection Moulding Machine

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 0

编辑推荐

Metrics

本文评价