1 |
SABERI A, BAKHSHESHI H R, KARAMIAN, et al. Magnesium⁃Graphene Nano⁃Platelet Composites: Corrosion Behavior, Mechanical and Biological Properties [J]. Journal of Alloys and Compounds, 2020, 821: 153 379.
|
2 |
胡建鹏, 邢 东, 郭明辉. 植物纤维增强聚乳酸可生物降解复合材料研究动态 [J]. 西南林业大学学报(自然科学), 2020, 39(6): 1⁃9.
|
|
HU J P, XING D, GUO M H. Research Progress and Prospect in Plant Fiber Reinforced Polylactide Acid Biodegradable Composites [J].Journal of Southwest Forestry University(Natural Science), 2020, 39(6): 1⁃9.
|
3 |
黄苏萍, 周科朝. HA/HDPE多尺度生物复合材料的制备与力学性能 [J]. 高分子材料科学与工程, 2010, 26(11): 147⁃150.
|
|
HUANG S P, ZHOU K C. Preparation and Mechanical Properties of HA/HDPE Composite with Multi⁃Scale Structure [J]. Polymer Materials Science & Engineering, 2010, 26(11): 147⁃150.
|
4 |
李新功, 吴义强, 郑 霞. 生物可降解竹纤维增强塑料复合材料成型工艺 [J]. 世界竹藤通讯, 2009, 7(4): 22⁃26.
|
|
LI X G, WU Y Q, ZHENG X. Forming Technology of Bamboo Fiber Reinforced Biodegradable Plastic Compo⁃sites [J]. World Bamboo and Rattan, 2009, 7(4): 22⁃26.
|
5 |
任宇飞, 孙瑞洲, 轩朝阳, 等. PET/SiO2纳米复合材料的研究进展 [J]. 化工新型材料, 2019, 47(10): 11⁃14.
|
|
REN Y F, SUN R Z, XUAN C Y, et al. Research Pro⁃gress of PET / SiO2 Nanocomposites [J]. New Chemical Materials, 2019, 47(10): 11⁃14.
|
6 |
许孔力, 许学伟, 李丽英, 等. 碳纳米管/聚合物纳米复合材料研究进展 [J]. 首都师范大学学报(自然科学版), 2019, 40(5): 84⁃88.
|
|
XU K L, XU X W, LI L Y, et al. Research Progress on Carbon Nanotube/Polymer Nanocomposites [J]. Journal of Capital Normal University(Natural Science), 2019, 40(5): 84⁃88.
|
7 |
SIKORA J W, SAMUJLO B. Investigation of the Poly(vinyl chloride) Extrusion Process Using a Feed Throat with a Feed Pocket [J]. Polymer Engineering & Science, 2014, 54(9): 2 037⁃2 045.
|
8 |
杜遥雪, 石绍伟, 殷小春, 等. 3种混炼单元加工聚合物混合性能的模拟对比 [J]. 高分子材料科学与工程, 2016, 32(6): 101⁃106.
|
|
DU Y X, SHI S W, YIN X C, et al. Comparison of Polymer Mixing Properties Processed by Three Kinds of Blending Unit [J]. Polymer Materials Science & Engineering, 2016, 32(6): 101⁃106.
|
9 |
李晓翠, 彭 炯, 陈晋南. 销钉单螺杆混炼段分布混合性能的数值研究 [J]. 中国塑料, 2010, 24(2): 109⁃112.
|
|
LI X C, PENG J, CHEN J N. Numerical Study on Distributive Mixing Performance of Mixing Section of Pin Single⁃Screw Extruders [J]. China Plastics, 2010, 24(2): 109⁃112.
|
10 |
HOPMANN C, FISCHER T. New Plasticising Process for Increased Precision and Reduced Residence Times in Injection Moulding of Micro Parts [J]. CIRP Journal of Manufacturing Science and Technology, 2015, 9: 51⁃56.
|
11 |
POTENTE H, TOBBEN W H. Improved Design of Shearing Sections with New Calculation Models Based on 3D Finite⁃Element Simulations [J]. Macromol Mater Eng, 2002, 287(11): 808⁃814.
|
12 |
鉴冉冉, 谢鹏程, 杨卫民. 聚合物螺杆塑化过程传热特性研究进展 [J]. 塑料, 2016, 45(4): 69⁃72.
|
|
JIAN R R, XIE P C, YANG W M. Research Development on Heat Transfer Characteristics of the Polymer Screw Plasticizing Process [J]. Plastics, 2016, 45(4): 69⁃72.
|
13 |
金日光,马秀清. 高聚物流变学 [M]. 上海: 华东理工大学出版社, 2012: 88⁃102.
|
14 |
JIAN R R, YANG W M, CHENG L S, et al. Numerical Analysis of Enhanced Heat Transfer by Incorporating Torsion Elements in the Homogenizing Section of Polymer Plasticization with the Field Synergy Principle [J]. International Journal of Heat and Mass Transfer, 2017, 115: 946⁃953.
|
15 |
JIAN R R, YANG W M, XIE P C, et al. Enhancing A Multi⁃Field⁃Synergy Process for Polymer Composite Plasticization: A Novel Design Concept for Screw to Facilitate Phase⁃to⁃Phase Thermal and Molecular Mobility [J]. Applied Thermal Engineering, 2020, 164: 114 448.
|
16 |
JIAN R R, YANG W M, CHENG L S, et al. Numerical Simulation on the Enhanced Mixing of Polymer Melt by Single Screw with Torsion Elements in the Homogenizing Section [J]. Polym⁃Korea, 2018, 42(6): 910⁃918.
|
17 |
张 伟. 同向三螺杆挤出机的混炼性能评价 [D]. 北京: 北京化工大学, 2011.
|