
《中国塑料》编辑部 ©2008-2024 版权所有
地址:北京市海淀区阜成路11号 邮编:100048
编辑部:010-68985541 联系信箱:cp@plaschina.com.cn
广告部/发行部:010-68985253 本系统由北京玛格泰克科技发展有限公司设计开发
›› 2023, Vol. 37 ›› Issue (6): 91-98.
张文才1,郝晓刚1,裴强2,亢小丽3
收稿日期:
2023-01-20
修回日期:
2023-02-25
出版日期:
2023-06-26
发布日期:
2023-06-26
Received:
2023-01-20
Revised:
2023-02-25
Online:
2023-06-26
Published:
2023-06-26
摘要: 综述了近年来废弃聚乙烯(RPE)、废弃聚丙烯(RPP)及其共混物(RPE/RPP)改性沥青的研究进展,总结分析了三大类改性剂所存在的优缺点,并对废弃塑料改性剂未来发展的趋势进行了展望。
张文才 郝晓刚 裴强 亢小丽. 废弃聚乙烯、废弃聚丙烯改性沥青的研究进展[J]. , 2023, 37(6): 91-98.
[1]ZHANG F, Hu C. The research for crumb rubber/waste plastic compound modified asphalt[J]. Journal of Thermal Analysis and Calorimetry, 2015, 124(2):729–741.[2]LI J, XIAO F, ZHANG L, et al. Life cycle assessment and life cycle cost analysis of recycled solid waste materials in highway pavement: A review[J] Journal of Cleaner Production, 2019, 233, 1182–1206.[3]KALANTAR Z N, MOHAMED R K, ABDELAZIZ M. A review of using waste and virgin polymer in pavement[J]. Construction and Building Materials,2012,33.[4]LANDI D, GIGLI S., GERMANI M., et al. Investigating the feasibility of a reuse scenario for textile fibres recovered from end-of-life tyres[J].. Waste Management, 2018, 75, 187–204.[5]SAFEER H, IMRAN H, JAMAL, et al. Sustainable use of waste plastic modifiers to strengthen the adhesion properties of asphalt mixtures[J]. Construction and Building Materials, 2020, 235 (C):117496.[6]DU Z, JIANG C, YUAN J, et al. Low temperature performance characteristics of polyethylene modified asphalts–A review[J]. Construction and Building Materials, 2020, 264.[7]陆景富,张泽保.废旧聚乙烯塑料改性沥青路用性能的研究及实践[J].中南公路工程,1996,(1):61-64.[8]陆景富,齐在春,鞠江庆.废旧聚乙烯塑料改性沥青的研究应用[J].河南交通科技,1998,(6):21-24.[9]李攀,李东峰,陆新焱,等.回收PE地膜残膜在高性能沥青路面新材料中应用[J].中国塑料,2021,35(8):84-87.LI Pan, LI Dongfeng, LU Xinyan, et al. Research in Application of Recycled PE Mulching Films for New Material of High Performance Asphalt Pavement[J]. CHINA PLASTICS, 2021,35(8):84-87.[10]ZACHARIAH J P, SARKAR P P, PAL M. Fatigue Life of Polypropylene Modified Crushed Brick Asphalt Mix: Analysis and Prediction[J]. Proceedings of the Institution of Civil Engineers-Transport, 2020, 174(2).[11]杨锡武,刘克,冯梅,等.生活废旧塑料改性沥青性能及机理研究[J].重庆交通大学学报(自然科学版),2017,36(01):30-35,109.YANG Xiwu, LIU Ke, FENG Mei et al. Performance and Mechanism Investigation of Recycled Plastic Modified Asphalts[J]. JOURNAL OF CHONGQING JIAOTONG UNIVERSITY( NATURAL SCIENCE) ,2017,36(01):30-35,109.[12]苏凯,徐斌,于晓晓.废塑料改性沥青的研究进展[J].石油沥青,2020,34(06):10-20.SU Kai, XU Bin, YU Xiaoxiao. Research Progress of Waste Plastic Modified Asphalts[J]. PETROLEUM ASPHALT, 2020,34(06):10-20.[13]山西省交通科学研究院.公路沥青混合料用抗车辙剂技术要求及检测方法:DB 14/T 1715-2018[M].山西省质量技术监督局,2018.[14]交通运输部公路科学研究院.沥青混合料改性添加剂 第一部分:抗车辙剂:JT/T 860.1-2013[M].中华人民共和国交通运输部,2013.[15]YAN K, CHEN J, YOU L, et al. Characteristics of compound asphalt modified by waste tire rubber (WTR) and ethylene vinyl acetate (EVA): Conventional, rheological, and microstructural properties[J]. Journal of Cleaner Production, 2020, 258(10):120732.[16]周江.生活废旧塑料改性沥青性能影响因素论述[J].南方农机,2019,(10):251-252. [17] EHRIG R J. Plastics recycling: products and processes [M]. Xanthos ed. Munich: Hanser Publishers, Distributed in the U.S.A. and Canada by Oxford University Press, 1992.[18] CHEN W-T, JIN K, WANG N-H L. The Use of Supercritical Water for the Liquefaction of Polypropylene into Oil[J].ACS Sustainable Chemistry and Engineering, 2019:3749-3758.[19]张永军,王小平,厚苏伟.高密度聚乙烯复合材料性能改进的研究进展[J].塑料科技,2021,49(5):103-107.ZHANG Yong-jun, WANG Xiao-ping, HOU Su-wei..Progress on Performance Improvement in the Recent of High Density Polyethylene Composites [J] Plastics Science and Technology. 2021,49(5):103-107.[20]张敏.NOVOPHALT改性沥青路面质量的控制技术[J].中外公路,2004(04):39-42.[21]赵可.沥青及沥青混合料改性研究[D].西安:西安公路交通大学,1999.[22]孙春阳,曲恒辉,张圣涛,等.不同改性剂改性基质沥青性能试验[J].长沙理工大学学报(自然科学版),2019,16(2):28-35.SUN CHUNyang, QU HENGhui, ZHANG SHNEGtao. Experimental study on properties of asphalt modified by different modifiers [J]. Journal of Changsha University of Science and Technology(Natural Science),2019,16(2):28-35.[23]COSTA L M.B, SILVA H M.R.D, PERALTA J, et al. Using waste polymers as a reliable alternative for asphalt binder modification-Performance and morphological assessment[J]. Construction and Building Materials, 2019, 198(20): 237-244.[24]朱曲平,黄刚.回收塑料复配SBR改性沥青及混合料性能与应用研究[J].公路工程,2021,46(02):103-111+131.ZHU Quping, HUANG Gang. Research on Performance and Application of Recycled Plastic Compound SBR Modified Asphalt and Mixture [J].Highway Engineering,2021,46(02):103-111+131.[25]FANG C, LIU P, YU R, et al. Preparation process to affect stability in waste polyethylene-modified bitumen[J]. Construction & Building Materials, 2014, 54: 320-325.[26]CUADRI A.A, ROMAN C, GARCíA-MORALES M, et al. Formulation and processing of recycled-low-density-polyethylene-modified bitumen emulsions for reduced-temperature asphalt technologies[J]. Chemical Engineering Science, 2016, 156: 197-205.[27]王涛.废旧塑料改性沥青相容性研究[D].北京:中国石油大学,2010.[28]KAKAR M R, MIKHAILENKO P, PIAO Z, et al. Analysis of waste polyethylene (PE) and its by-products in asphalt binder[J]. Construction and Building Materials,2021, 280, 122492.[29]杨锡武,刘克,杨大田.PE改性沥青的几个问题[J].中外公路,2008,28(6):203—207.[30]LI J,YE Q, AMIRKHANIAN S, et al. Effects of Waste Polyethylene on the Rheological Properties of Asphalt Binder[J]. Journal of testing evaluation,2020, 48(3):1893-1904.[31]LIANG M, SUN C, YAO Z, et al. Utilization of wax residue as compatibilizer for asphalt with ground tire rubber/recycled polyethylene blends[J]. Construction and Building Materials, 2020, 230:116966.1-116966.12.[32]NIZAMUDDIN S, JAMAL M, GRAVINA R, et al. Recycled plastic as bitumen modifier: The role of recycled linear low-density polyethylene in the modification of physical, chemical and rheological properties of bitumen[J]. Journal of Cleaner Production, 2020, 266: 121988.[33]李骏宇.废旧聚乙烯改性沥青及其混合料的性能研究[D].长沙:长沙理工大学,2012.[34]MA D, ZHAO, D, ZHAO J, et al. Functionalization of reclaimed polyethylene with maleic anhydride and its application in improving the high temperature stability of asphalt mixtures[J]. Construction and Building Materials, 2016, 113: 596-602. [35]ALMEIDA A, CAPITO S, BANDEIRA R, et al. Performance of AC mixtures containing flakes of LDPE plastic film collected from urban waste considering ageing[J]. Construction and Building Materials, 2020, 232: 117253.[36]DALHAT M.A, ADESINA A Y. Utilization of micronized recycled polyethylene waste to improve the hydrophobicity of asphalt surfaces[J]. Construction and Building Materials, 2020, 240:117966.[37]韩贤新,刘喜军,王宇威.PP/EPR/改性纤维素复合材料的制备及性能研究[J].中国塑料,2021,35(12):37-44.HAN Xianxin, LIU Xijun, WANG Yuwei. Preparation and performance of PP/EPR/modified cellulose composite [J]. CHINA PLASTICS,2021,35(12):37-44.[38]张文华,原心红,刘金妹,等.废旧塑料在道路工程建设中的应用[J].塑料科技,2022,50(02):93-97.ZHANG Wenhua, YUAN Xinhong, LIU Jinmei et al. Application of Waste Plastics in Road Engineering Construction [J].Plastics Science and Technology,2022,50(02):93-97.[39]YUANITA E, HENDRASETYAWAN B E, FIRDAUS D F, et al. Improvement of polypropylene (PP)-modified bitumen through lignin addition[C]. IOP Conference Series: Materials Science and Engineering, 2017, 223, 012028.[40]WANG S, MALLICK R B, RAHBAR N. Toughening mechanisms in polypropylene fiber-reinforced asphalt mastic at low temperature[J]. Construction and Building Materials, 2020, 248(C).[41]杨佳昕.废旧聚丙烯温拌沥青的性能综合分析[J].四川水泥,2019,(9):140.[42]AYASH A A, RAOUF R M, EWEED K M. Mechanical characteristics of asphalt mixture modified by polypropylene waste[J]. Defect and Diffusion Forum, 2019, 398: 90-97.[43]李梅,陆景富.废弃塑料在改善沥青路用性能中应用[J].公路,1995(11):36-38.[44]刘云全.一种高模量沥青混凝土添加剂[P].中国专利:CN103073219A,2013-05-01.[45]宋乐春.一种沥青混凝土添加剂及其制备方法[P].中国专利:CN110922084A,2020-03-27.[46]ZHANG J Z, LI H Y, LIU P, et al. Experimental Exploration of Influence of Recycled Polymer Components on Rutting Resistance and Fatigue Behavior of Asphalt Mixtures[J]. Journal of Materials in Civil Engineering, 2020, 32(6): 1-10.[47]傅珍,常晓绒,武孟,等.高聚物-木质素纤维复合增强剂对沥青混合料性能的影响[J].西安工业大学学报,2020,40(3):266-273.FU Zhen, CHANG Xiaorong, WU Meng et al. Effect of Polymer-Lignin Fiber Composite Enhancer on Performance of Asphalt Mixture[J].Journal of Xi'an Technologyical University,2020,40(3):266-273. |
[1] | 李凯 曹宁 蒋岳航 李建华 崔雪梅 连慧琴 汪晓东 崔秀国. 膨胀石墨/黑磷阻燃硬质聚氨酯泡沫的制备及性能研究[J]. , 2023, 37(6): 21-30. |
[2] | 吴加俊 曾佳 刘缓缓 朱民 倪忠斌 施冬健 陈明清. 釜式发泡制备氢化苯乙烯-异戊二烯-苯乙烯/聚丙烯发泡珠粒及其性能研究[J]. , 2023, 37(6): 43-49. |
[3] | 郑兴博 李佳汶 李子辉 韩文娟 蒋晶 王小峰 李倩. 氮化硼改性超高分子量聚乙烯的摩擦学性能研究[J]. , 2023, 37(5): 28-33. |
[4] | 张文才 郝晓刚 裴强 亢小丽. 废弃聚乙烯/废弃聚丙烯共混物功能化改性沥青混合料性能研究[J]. , 2023, 37(5): 40-47. |
[5] | 于盛睿 刘钦迪 徐磊 骆杰 吴辉庭 韩文 邹佳勇 周华民. 双面覆膜与纤维含量对MIM/IMD工艺翘曲变形及力学性能的影响[J]. , 2023, 37(5): 55-61. |
[6] | 朱辉 段凯歌 倪佳 梅振威 陈小蝶 于东明 周朝锡. 纳米SiO2改性PE-Xa记忆环的制备及性能研究[J]. , 2023, 37(4): 30-34. |
[7] | 王宝川 陈士军 张萍波 蒋平平 冷炎 盛勋勋. 不同粒径氧化锌以及改性纳米氧化锌对多功能PBAT复合膜的影响[J]. , 2023, 37(4): 11-16. |
[8] | 顾建国 孙建凯 侯培培 何浩 焦文亮. 双轴取向聚氯乙烯管材解取向研究[J]. , 2023, 37(4): 35-38. |
[9] | 李桂丽 谢丹 夏学莲 孙李龙. 纤维素纳米纤维对聚乳酸结晶、流变和拉伸性能的影响[J]. , 2023, 37(4): 17-22. |
[10] | 曹炜强 李良勇 张青松 王俊潼 李后杨. 椰壳纤维增强环氧树脂复合格栅的制备及性能研究[J]. , 2023, 37(3): 13-18. |
[11] | 韩阳阳 杨晓炯 张贵恩 董春雨 张小刚. 导电橡胶力学性能和耐高温性能研究[J]. , 2023, 37(3): 24-29. |
[12] | 郭文娇 于雯霞 党春蕾 何艺琳 赵亚欣 田华峰 李莹. 导电聚氨酯泡沫材料研究进展[J]. , 2023, 37(3): 113-122. |
[13] | 董竞辉, 桑晓明, 陈祯, 尹伟浩, 姜骞, 陈兴刚. 短切碳纤维对聚苯腈/碳纤维复合材料性能的影响[J]. 中国塑料, 2023, 37(2): 31-37. |
[14] | 段凯歌, 朱辉, 倪佳, 泮豪, 周朝锡, 陈小蝶, 梅振威, 于东明. 热塑性交联聚乙烯(TPEXa)管材的制备及性能研究[J]. 中国塑料, 2023, 37(1): 8-12. |
[15] | 李毅, 樊桂琪, 吴天宇, 叶海木. 石墨微片对聚三氟氯乙烯结晶及性能的影响[J]. 中国塑料, 2023, 37(1): 18-25. |
阅读次数 | ||||||
全文 |
|
|||||
摘要 |
|
|||||