Technological Progress in High Speed Extrusion of Single-screw Extruders

doi:10.19491/j.issn.1001-9278.2009.08.001

China Plastics ›› 2009, Vol. 23 ›› Issue (08): 1-6 .DOI: 10.19491/j.issn.1001-9278.2009.08.001

Technological Progress in High Speed Extrusion of Single-screw Extruders

PAN Long;ZHANG Yu-xia;JIN Ming;XUE Ping

Beijng

Received:2009-05-08 Revised:1900-01-01 Online:2009-08-26 Published:2009-08-26

Abstract

Abstract:

The technology of high speed single-screw extrusion was briefly reviewed. The extrusion, heating and cooling, and drive systems on regular and high speed extruders were compared, the innovation in screw parameter and placement, barrel cooling, flow layout, and drive mode of the high speed extruders were summarized. The shortcomings in current high speed extruders were pointed out, the developing trends in materials adaptability and analog control were discussed. The latest extruders supplied by the top manufacturers were listed.

Key words: FONT-FAMILY: Arial, mso-font-kerning: 1.0pt, mso-ansi-language: EN-US, mso-fareast-language: ZH-CN, mso-bidi-language: AR-SA, mso-fareast-font-family: 宋体">single-screw extruderFONT-FAMILY: 宋体, mso-ascii-font-family: Arial, mso-hansi-font-family: Arial, mso-bidi-font-family: Arial, mso-font-kerning: 1.0pt, mso-ansi-language: EN-US, mso-fareast-language: ZH-CN, mso-bidi-language: AR-SA">, FONT-FAMILY: Arial, mso-font-kerning: 1.0pt, mso-ansi-language: EN-US, mso-fareast-language: ZH-CN, mso-bidi-language: AR-SA, mso-fareast-font-family: 宋体">high speed extrusionFONT-FAMILY: 宋体, mso-ascii-font-family: Arial, mso-hansi-font-family: Arial, mso-bidi-font-family: Arial, mso-font-kerning: 1.0pt, mso-ansi-language: EN-US, mso-fareast-language: ZH-CN, mso-bidi-language: AR-SA">, FONT-FAMILY: Arial, mso-font-kerning: 1.0pt, mso-ansi-language: EN-US, mso-fareast-language: ZH-CN, mso-bidi-language: AR-SA, mso-fareast-font-family: 宋体">extrusion moldingFONT-FAMILY: 宋体, mso-ascii-font-family: Arial, mso-hansi-font-family: Arial, mso-bidi-font-family: Arial, mso-font-kerning: 1.0pt, mso-ansi-language: EN-US, mso-fareast-language: ZH-CN, mso-bidi-language: AR-SA">, FONT-FAMILY: Arial, mso-font-kerning: 1.0pt, mso-ansi-language: EN-US, mso-fareast-language: ZH-CN, mso-bidi-language: AR-SA, mso-fareast-font-family: 宋体">extrusion technology

CLC Number:

TQ325.1 4

PAN Long, ZHANG Yu-xia, JIN Ming, XUE Ping. Technological Progress in High Speed Extrusion of Single-screw Extruders[J]. China Plastics, 2009, 23(08): 1-6 .

[1]	Zhang Feng Bin Li Li-hua Guo. Effect of γ-irradiation on HDPE and Properties of wood Fiber/γ- HDPE Composites [J]. China Plastics, 2009, 23(08): 75-78 .
[2]	WANG Guang-li;TANG Yu. The studied on application of Microbicidal SiOx Nanoparticle to Preparation of PVC/ (Quaternary Ammonium Salt)- SiOx Composites [J]. China Plastics, 2009, 23(08): 79-82 .
[3]	XU Guo-zhi. Structure and Property of Fully Biodegradable Poly(butylene succinate)/Poly(butylene adipate/Terephthalate)(PBS/PBAT) Blends [J]. China Plastics, 2009, 23(08): 18-21 .
[4]	LIU Jun-hui;LV Ke;YANG Rong-jie. Mechanical Properties of Octavinyl-polyhedral oligomeric silsesquioxane/ABS Composites [J]. China Plastics, 2009, 23(08): 27-30 .
[5]	LI Hai-dong;LIN Yu-han;NIE Wei;JI Xiang-ling. Crystalline Morphology of PLLA-PDLA Copolymers Films [J]. China Plastics, 2009, 23(08): 48-52 .
[6]	ZHANG Chao;XIE Hong-de;HE Shun-lun . Preparation of Glass Fiber Reinforced Flame Retardant PBT Composite With High CTI 2 [J]. China Plastics, 2009, 23(08): 22-26 .
[7]	. Effects of Metal Oxides on the Release Characteristic of HCl from the Combustion of Poly (vinyl chloride) [J]. China Plastics, 2009, 23(08): 39-42 .
[8]	Xu Xiang-Bin. Morphology Construction and Properties of the Conductive PP/EPDM/CB Composite with Sandbag Structure [J]. China Plastics, 2009, 23(08): 43-47 .
[9]	. The Synergy of Boron –Aluminium in the Intumescent Flame Retardant PP [J]. China Plastics, 2009, 23(08): 91-94 .
[10]	Wei-Wei Xu Xiao-Wu Wang . Effect of Screw Configuration on Mechanical Property of PP/PA6 Blend System [J]. China Plastics, 2009, 23(08): 95-100 .
[11]	Qiang FU. Injection Mould Design for the Multi-color Meter Lid Based on the Principle of Co-injection Molding Process [J]. China Plastics, 2009, 23(08): 101-104 .
[12]	WENG Yun-xuan;NIU Li-jie;XU Guo-zhi. Production Situation and Development Trend of Biodegradable Plastics in the World [J]. China Plastics, 2008, 22(12): 1-5 .

Technological Progress in High Speed Extrusion of Single-screw Extruders

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 12

Recommended Articles

Metrics

Comments