China Plastics ›› 2011, Vol. 25 ›› Issue (01): 106-109 .DOI: 10.19491/j.issn.1001-9278.2011.01.024
Previous Articles Next Articles
WU Yunong WANG Shuhui XU Zhongming
Received:
Revised:
Online:
Published:
Abstract: In order to improve the uniformity of wall thickness of extrusion-blow-molded parts, several improvements were made, including an automatic control device of wall thickness was used, the structure of parison extrusion die was improved, and automatic close-loop control was used during the whole working process. The efficiency of the improved machine was greatly improved, and at the same time the weight deviation of the extrusion-blow-molded parts and the average energy consumption was decreased.
Key words: extrusion blow molding, wall thickness, extrusion die, close-loop control
WU Yunong WANG Shuhui XU Zhongming. Control Method for Wall Thickness of Extrusion-blow-molded Parts[J]. China Plastics, 2011, 25(01): 106-109 .
0 / / Recommend
Add to citation manager EndNote|Ris|BibTeX
URL: https://www.plaschina.com.cn/EN/10.19491/j.issn.1001-9278.2011.01.024
https://www.plaschina.com.cn/EN/Y2011/V25/I01/106