China Plastics ›› 2016, Vol. 30 ›› Issue (12): 103-106 .DOI: 10.19491/j.issn.1001-9278.2016.12.019
Previous Articles
Received:
Revised:
Online:
Published:
Abstract: This article analyzed the technological characteristic of a printer shell and introduced the structural design and operating process of the injection mould for this part. To fabricate such a mould, two side core-pulling mechanisms were adopted, and antecedent pushing-out was realized in the sloping insert of moving molds at the mold opening time by using wedge and sliding block. Fixed mould puller pins, stop drag-bars and pull-rod were used to open the mould sequentially. Such a mould structure was rational and safe in operation.
Key words: printer shell, antecedent pushing out, sloping insert
0 / / Recommend
Add to citation manager EndNote|Ris|BibTeX
URL: https://www.plaschina.com.cn/EN/10.19491/j.issn.1001-9278.2016.12.019
https://www.plaschina.com.cn/EN/Y2016/V30/I12/103