China Plastics ›› 2017, Vol. 31 ›› Issue (4): 97-101 .DOI: 10.19491/j.issn.1001-9278.2017.04.018
Previous Articles Next Articles
Received:
Online:
Published:
Abstract: In view of the problems that there are multiple threaded core-pulling mechanism and the intersection of slide blocks in military telescopes, the structure of their plastic parts was first analyzed, and then a motor which drives the gear core-pulling mechanism was adopted and multiple limit switch controllers were also used to design the relevant injection mold. Such a design made the mold work in good order and also resolved the demolding difficulty. The fabricated mould exhibited a stable run cycle and an ordered motion for various sliders during the demolding process. This mould has been used for mass production, and the obtained parts gain a good quality with a process yield over 98 %.
Key words: intersectional slide block, screw-thread core pulling, military telescope, injection mould, motor, gear transmission
0 / / Recommend
Add to citation manager EndNote|Ris|BibTeX
URL: https://www.plaschina.com.cn/EN/10.19491/j.issn.1001-9278.2017.04.018
https://www.plaschina.com.cn/EN/Y2017/V31/I4/97