| [1] Park C B, Matuana L M, Balatinecz J J. Structures and Mechanical Properties of Microcellular Foamed Polyvinyl Chloride[J]. Cellular Polymers, 1998, 17(1):1-16.[2] Suh N P. Impact of microcellular plastics on industrial practice and academic research[J]. Macromolecular Symposia, 2003, 201(1):187-202.[3] Wang L, Ishihara S, Ando M, et al. Fabrication of High Expansion Microcellular Injection-Molded Polypropylene Foams by Adding Long-Chain Branches[J]. Industrial & Engineering Chemistry Research, 2016, 55(46):11970-11982.[4] Taki K, Tabata K, Kihara S, et al. Bubble coalescence in foaming process of polymers.[J]. Polymer Engineering & Science, 2006, 46(5):680-690.[5] Zhai W, Wang H, Yu J, et al. Cell coalescence suppressed by crosslinking structure in polypropylene microcellular foaming[J]. Polymer Engineering & Science, 2008, 48(7):1312–1321.[6] 李超, 游峰, 王大威,等. 发泡聚丙烯制备与应用研究进展[J]. 高分子通报, 2015(5):36-42.Li Chao, You Feng, Wang Dawei, et al. Preparation and Application of Expanded Polypropylene Foam[J] .Chinese Polymer Bulletin, 2015 (5): 36-42.[7] 郭鹏, 吕明福, 吕芸,等. 聚丙烯发泡材料的研究进展[J]. 石油化工, 2011, 40(6):679-684.Guo Peng, Lv Mingfu, Lv Yun, et al. Research Progress in Polypropylene Foams [J]. Petrochemical Technology, 2011,40 (6): 679-684.[8] 郭喆, 揣成智, 刘卉. 聚丙烯发泡的研究进展[J]. 塑料制造, 2009(4):88-92.Guo Zhe, Chuai Chengzhi, Liu Hui. The Progresses of Studies on Polypropylene Foam [J]. Plastics Manufacture, 2009 (4): 88-92[9] 张纯. 超微孔发泡聚合物注射成型工艺及性能的研究[D]. 贵州大学, 2005Zhang Chun. Study on characters of injection molding of microcellular foaming of polumer [D]. Guizhou University, 2005[10] 贾秀峰, 马懿, 孙颜文,等. 国内外聚丙烯发泡材料的发展概况[J]. 化工新型材料, 2001, 29(8):1-4.Jia Xiufeng, Ma Yi,Sun, Yanwen, et al. Development situation of polypropylene foaming material at home and abroad [J]. New Chemical Materials, 2001, 29(8):1-4[11] 蒋团辉. 微发泡过程装置设计及过程研究[D]. 贵州大学, 2009Jiang Tuanhui. Microcellular Foaming Process Device Design And Study On The Foaming Process [D]. Guizhou University, 2009[12] Doroudiani S, Park C B, Kortschot M T. Effect of the crystallinity and morphology on the microcellular foam structure of semicrystalline polymers[J]. Polymer Engineering & Science, 1996, 36(21):2645-2662.[13] Kaewmesri W, Rachtanapun P, Pumchusak J. Effect of solvent plasticization on polypropylene microcellular foaming process and foam characteristics[J]. Journal of Applied Polymer Science, 2010, 107(1):63-70[14] Blander M. Bubble nucleation in liquids[J]. Advances in Colloid & Interface Science, 1979, 10(1):1-32.[15] N. S. Ramesh ?, Rasmussen D H, Gregory A. Campbell. The heterogeneous nucleation of microcellular foams assisted by the survival of microvoids in polymers containing low glass transition particles. Part I: Mathematical modeling and numerical simulation[J]. Polymer Engineering & Science, 1994, 34(22):1685–1697.[16] Ameli A, Jahani D, Nofar M, Jung PU, Park CB. Development of high void fraction polylactide composite foams using injection molding: mechanical and thermal insulation properties.[J] Compos Sci Technol 2014;90(10):88–95[17] Wong AS, Guo YT, Park CB. Fundamental mechanisms of cell nucleation in polypropylene foaming with supercritical carbon dioxide-effects of extensional stresses and crystals.[J] J Supercrit Fluids ,2013;79:142–151[18] Yuan MJ, Turng LS. Microstructure and mechanical properties of microcellular injection molded polyamide-6 nanocomposites[J].Polymer 2005;46 (18):7273–7292[19] 龚维, 李宏, 何颖,等. 微孔的存在对微发泡聚烯烃材料力学性能的影响[J]. 贵州师范大学学报:自然科学版, 2012, 30(3):84-88.Gong Wei, Li Hong, He Ying, et al. Effect of microcell on mechanical properties for foam polypropylene. [J]. Journal of Guizhou Normal University ( Natural Sciences), 2012, 30(3):84-88.[20] 杨胜强,王旭,许向彬. EPDM对PP结构发泡材料泡孔形态的影响[J]. 塑料工业,2009,37(02):11-14+21.Yang Shengqiang, Wang Xu, Xu Xiangbin. Effect of EPDM on Cellular Morphology of PP Structural Foam[J]. China Plastics Industry, 2009,37(02):11-14+21.[21] 程实,胡凌骁,丁玉梅,杨卫民,谢鹏程. PP/EPDM/滑石粉微孔发泡复合材料的制备和性能[J]. 塑料,2014,43(05):75-77+74.Cheng Shi, Hu Lingxiao, Ding Yumei, Yang Weimin, Xie Pengcheng. Preparation and Properties of Microcellular PP / EPDM / Talc Composite Materials[J]. Plastic ,2014,43(05):75-77+74.[22] 康菲菲, 高长云, 冷秀江,等. 交联对PP/TPI超临界二氧化碳发泡性能的影响[J]. 塑料, 2017(2):118-120.Kang Feifei, Gao Changyun, Leng Xiujiang, et al. Ingluence of Crosslinking on Super Critical CO2 Foaming Properties of Polypropylene/Trans-1,4-Polyisoprene Blends[J]. Plastic, 2017(2):118-120.[23] Zhao J, Zhao Q, Wang C, et al. High thermal insulation and compressive strength polypropylene foams fabricated by high-pressure foam injection molding and mold opening of nano-fibrillar composites[J]. Materials & Design, 2017, 131:1-11.[24] 高萍, 何力, 王昌银,等. 冷却速率对PP/GF微发泡复合材料发泡行为及力学性能的影响[J]. 塑料工业, 2016, 44(1):56-59Gao Ping, He Li, Wang Changyin, et al. Effect of Cooling Ｒate on the Foaming Behaviors and Mechanical Properties of PP/GF Micro-foaming Composites[J]. China Plastics Industry, 2016, 44(1):56-59[25] 何跃,蒋团辉,刘阳夫,龚维,何力. 橡胶粒子对微发泡聚丙烯复合材料发泡行为与力学性能的影响[J]. 材料工程,2017,45(02):80-87. He Yue, Jiang Tuanhui, Liu Yangfu, Gong Wei, He Li, et al. Influence of Rubber Powders on Foaming Behavior and Mechanical Properties of Foamed Polypropylene Composites[J]. Journal of Materials Engineering, 2017,45(02):80-87.[26] Wang M, Xie L, Qian B, et al. Extrusion foaming behavior of a polypropylene/nanoclay microcellular foam[J]. Journal of Applied Polymer Science, 2016, 133(41).:6.[27] 赵丽萍, 殷嘉兴, 张祥福,等. 聚丙烯/滑石粉微发泡材料力学性能及发泡行为的研究[J]. 上海塑料, 2016(3):55-58.Zhao Liping, Yin Jiaxing, Zhang Xiangfu, et al. Study of Mechanical Properties and Foaming Behavior of Microcellular Foamed PP/Talcum Composites[J]. Shanghai Plastics, 2016(3):55-58.[28] Hwang S S, Hsu P P. Effects of silica particle size on the structure and properties of polypropylene/silica composites foams[J]. Journal of Industrial & Engineering Chemistry, 2013, 19(4):1377-1383.[29] Ahmed S, Jones F R. A review of particulate reinforcement theories for polymer composites[J]. Journal of Materials Science, 1990, 25(12):4933-4942.[30] Wang L, Ando M, Kubota M, et al. Effects of Hydrophobic-Modified Cellulose Nanofibers (CNFs) on Cell Morphology and Mechanical Properties of High Void Fraction Polypropylene Nanocomposite Foams[J]. Composites Part A Applied Science & Manufacturing, 2017, 98:166–173.[31] 陈俊伟,王雷,庄晓萌,周正发,徐卫兵. 有机蒙脱土/聚丙烯复合材料微发泡性能研究[J]. 塑料工业,2012,40(11):54-58.Chen Junwei, Wang Lei, Zhuang Xiaomeng, Zhou Zhengfa, Xu Weibing. Research on the Micro-foaming Behavior of OMMT/PP Composites[J]. China Plastics Industry, 2012,40(11):54-58.[32] 段焕德, 王昌银, 王醴均,等. 三相存在下聚丙烯/纤维复合发泡材料的力学性能[J]. 高分子材料科学与工程, 2016, 32(2):71-77.Duan Huande, Wang Changyin, Wang Lijun, et al. Mechanical Properties of Polypropylene /Fiber Composite Foaming Materials Under the Condition of Three-Phase Existing[J]. Polymer Materials Science and Engineering, 2016, 32(2):71-77.[33] 龚维, 高家诚, 何力,等. 微发泡聚丙烯/晶须复合材料的发泡行为与力学性能[J]. 高分子材料科学与工程, 2011, 27(3):67-70.Gong Wei, Gao Jiacheng, He Li, et al. Foam Behavior and Mechanical Property of PP/Whisker Microcellular Foam Composites[J]. Polymer Materials Science and Engineering, 2011, 27(3):67-70.[34] 何海,邱启航,何力,龚维,张纯. GF增强母粒对微发泡PP/GF复合材料力学性能的影响[J]. 塑料科技,2013,41(09):47-51.He Hai, Qiu Qihang, He Li, Gong Wei, Zhang Chun. Effect of GF Reinforced Masterbatch on Mechanical Performances of Microcellur Foam PP/GF Composites[J]. Plastics Science and Technology, 2013,41(09):47-51.[35] 高萍, 何力, 王昌银,等. 冷却速率对PP/GF微发泡复合材料发泡行为及力学性能的影响[J]. 塑料工业, 2016, 44(1):56-59.Gao Ping, He Li, Wang Changyin, et al. Effect of Cooling Ｒate on the Foaming Behaviors and Mechanical Properties of PP/GF Micro-foaming Composites[J]. China Plastics Industry, 2016, 44(1):56-59.[36] 龚维,李宏,张纯,朱建华,何力. 结晶特性对微发泡聚丙烯材料发泡行为的影响[J]. 塑料,2012,41(02):52-55.Gong Wei, Li Hong, Zhang Chun, Zhu Jianhua, He Li. The Effect of Crystallization Characteristics on Foaming Behavior Polypropylene Materials[J]. Plastics, 2012,41(02):52-55.[37] 邱启航, 何海, 何力,等. 模具温度对PP/SiO2发泡行为的影响[J]. 塑料, 2013, 42(5):30-33.Qiu Qihang, He Hai, He Li, et al. Effects of Mold Temperature on Foaming Behavior of PP /SiO2[J]. Plastics, 2013, 42(5):30-33. |
