[1] 谢志国, 李伟平, 李程, 等. 亮度均匀的LED路灯透镜设计与研究[J]. 光学与光电技术, 2012, 10(5): 84-88.Xie Zhiguo, Li Weiping, Li Cheng, et al. LED Streetlight Lens Design and Research Based on Luminance Uniform Distribution[J]. Optics and Optoelectronic Technology, 2012, 10(5): 84-88.[2] 李海涛, 张苏娟, 张炜, 等. 液体封装LED汽车远光灯光学设计[J]. 光子学报, 2012, 41(11): 1327-1330.Li Haitao, Zhang Sujuan, Zhan Wei, et al. Optical Design of LED Automotive High-Beam Filled with Liquid[J]. ACTA Photonica Sinica, 2012, 41(11): 1327-1330.[3] Isayev A I. Numerical Simulation of Flow-Induced Birefringence-Comparison of Injection and Injection Compression Molding[J]. International Journal of Precision Engineering and Manufacturing, 2007, 8(1): 66-72.[4] 谢春稳, 王克俭. 变厚度透镜注射压缩成型的三维数值模拟[J]. 高分子材料科学与工程, 2013, 29(9): 169-174.Xie Chunwen, Wang Kejian. 3D Numerical Simulation of Injection Compression Molding Optical Lens with Variable Thickness[J]. Polymer Materials Science and Engineering, 2013, 29(9): 169-174.[5] Chen Wenchin, Chang Poyao, Tai Yichia. A Novel Optimization Approach Applied in Injection Molding of a LED Lighting Module[J]. International Journal of Applied Physics and Mathematics, 2013, 3(6): 392-395.[6] 杜遥雪, 杜思莹, 孙锐. LED射灯非球面透镜异腔注射压缩热流道模具: 中国, 201620172656.6[P]. 2016-07-06.[7] Krames M R, Shehekin O B, Mach R M, et al. Status and Future of High-Power Light-Emitting Diodes for Solid-State Lighting[J]. Journal of Display Technology, 2007, 3(2): 160-175.[8] 陈魁. 试验设计与分析[M]. 第2版. 北京: 清华大学出版社, 2005: 160-164.[9] 杜遥雪, 周阳, 殷小春, 等. LED非球面透镜注射压缩成型工艺稳健性优化分析[J]. 中国塑料, 2016, 30(3): 78-83.Du Yaoxue, Zhou Yang, Yin Xiaochun, et al. Steady Experimental Design of Injection Compression Molding Process for LED Aspheric Lens[J]. China Plastics, 2016, 30(3): 78-83. |