| [1]Z SHAYFULL, S SHARIF, A M ZAIN, et al.Potential of Conformal Cooling Channels in Rapid Heat Cycle Molding: A Review[J].Advances in Polymer Technology, 2014, 33(1):1-24
[2] E SACHS, S ALLEN, HL GUO, et al.Progress on tooling by 3D printing; Conformal cooling, dimensional control, surface finish and hardness [C]. .Proceedings of the Eighth Annual Solid Freeform Fabrication Symposium, 1997, :115-124
[3] E SACHS, E WYLONIS, S ALLEN, et al.Production of injection molding tooling with conformal cooling channels using the three dimensional printing process. [J].Polymer Engineering & Science., 2004, 40(5):1232-1247
[4]SUN YF, LEE KS, C N A Y.The Application of U Shape Milled Grooves for Cooling of Injection Moulds[J].Journal of Engineering Manufacture, 2002, 216(12):1561-1573
[5]FERREIRA J C, MATEUS A.Studies of rapid soft tooling with conformal cooling channels for plastic injection moulding[J].Journal of Materials Processing Technology, 2003, 142(2):508-516
[6]PARK HS, PHAM NH.Design of conformal cooling channels for an automotive part[J].International Journal of Automotive Technology, 2009, 10(1):87-93
[7]PARK HS, DANG XP.Optimization of conformal cooling channels with array of baffles for plastic injection mold[J].International Journal of Precision Engineering and Manufacturing, 2010, 11(6):879-890
[8]DANG XP, PARK HS.Design of U-shape milled groove conformal cooling channels for plastic injection mold[J].International Journal of Precision Engineering and Manufacturing, 2011, 12(1):73-84
[9]RAHIM S Z A, SHARIF S, ZAIN A M, et al.Improving the Quality and Productivity of Molded Parts with a New Design of Conformal Cooling Channels for the Injection Molding Process[J].Advances in Polymer Technology, 2016, 35(1):1-10
[10]XR XU, E SACHS, S ALLEN.The design of conformal cooling channels in injection molding tooling[J].Polymer Engineering and Science, 2001, 41(7):1265-1279
[11]AGAZZI A, OTKA V S, LEGOFF R, et al.Optimal cooling design in injection moulding process - A new approach based on morphological surfaces[J].Applied Thermal Engineering, 2013, 52(1):170-178
[12]Juan M.Jauregui-Becker,Guido Tosello,Fred JA.M. van Houten,et al. Performance Evaluation of a Software Engineering Tool for Automated Design of Cooling Systems in Injection Moulding[J].Procedia CIRP, 2013, 7(1):270-275
[13]CL LI.A feature-based approach to injection mould cooling system design[J].Computer-Aided Design, 2001, 33(14):1073-1090
[14]鲁中良, 史玉升, 刘锦辉等.注塑模随形冷却水路设计与制造技术概述[J].中国机械工程, 2006, 17(增刊):165-170
[15] 伍志刚.随形冷却注塑模的设计与制造关键技术研究[D]. 武汉: 华中科技大学, 2007.
[16] 耿静.注塑模具CAD冷却系统的研究[D]. 济南: 山东大学, 2008.
[17] 安晓玉.基于模型简化的注塑模冷却系统智能化设计研究[D]. 大连: 大连理工大学, 2009.
[18] 刘雷.基于3D打印的快速模具关键技术研究[D].石家庄: 河北科技大学, 2018.
[19] FRED GS.New concepts in mold conformal cooling design[C]. 2005–annual technical conference proceedings. Boston: Society of Plastics Engineers: 2005 of Conference.
[20]AU KM, YU KM.A scaffolding architecture for conformal cooling design in rapid plastic injection moulding[J].International Journal of Advanced Manufacturing Technology, 2007, 34(5-6):496-515
[21]WANG Y, YU KM, WANG C C L, et al.Automatic design of conformal cooling circuits for rapid tooling[J].Computer-Aided Design, 2011, 43(8):1001-1010
[22]MARIN F, DE MIRANDA J R, DE SOUZA A F.Study of the design of cooling channels for polymers injection molds[J].Polymer Engineering and Science, 2018, 58(4):552-559
[23]刘斌, 吴茜.注塑模具随形冷却水路的设计方法与分析[J].工程塑料应用, 2017, 45(08):123-128
[24]RAO N.S,G. S,SCHOTT NR,et al. Optimization of Cooling Systems in Injection Molds by an Easily Applicable Analytical Model[J].Journal of Reinforced Plastics and Composites, 2002, 21(5):451-459
[25]LAM YC, ZHAI LY, TAI K, et al.An evolutionary approach for cooling system optimization in plastic injection moulding[J].International Journal of Production Research, 2004, 42(10):2047-2061
[26]DIMLA D E.Design and optimisation of conformal cooling channels in injection moulding tools[J].Journal of Materials Processing Technology, 2005, 164(27):1294-1300
[27] SAIFULLAH.A B M, MASOOD. S H. Cycle time reduction in injection moulding with conformal cooling channels.[C]. // International Conference on Mechanical Engineering 2007 (ICME2007) Bangladesh: Dhaka, 2007 of Conference.
[28] CHOI J H, KIM J S, HAN E S, et al.Study on an optimized configuration of conformal cooling channel by branching law[C]. // ASME 2014 12th Biennial Conference on Engineering Systems Design and Analysis, ESDA 2014, Copenhagen, Denmark: American Society of Mechanical Engineers, 2014.
[29]KITAYAMA S, MIYAKAWA H, TAKANO M, et al.Multi-objective optimization of injection molding process parameters for short cycle time and warpage reduction using conformal cooling channel[J].International Journal of Advanced Manufacturing Technology, 2017, 88(5-8):1735-1744
[30]LIANG JZ.An optimal design of cooling system for injection mold[J].Polymer-Plastics Technology and Engineering, 2002, 41(2):261-271
[31] 祁东霞.遗传算法在注塑模冷却系统优化问题中的研究[D]. 郑州：郑州大学, 2005.
[32]史玉升, 伍志刚, 魏青松.随形冷却对注塑成型及生产效率的影响研究[J].华中科技大学学报, 2007, 35(3):60-62
[33] QIAN YP, WANG Y, HUANG JH, et al.Study on the optimization of conformal cooling channels for plastic injection mold[C]. 2012 International Conference on Manufacturing Engineering and Automation, ICMEA 2012, November 16, 2012 - November 18, 2012. Guangzhou, China: Trans Tech Publications, 2012. 502-506.
[34] 王勇.注塑模随形冷却优化设计及分型制造方法的研究[D]. 武汉: 湖北工业大学, 2013.
[35]Yu Wang, KaiMin Yu, Charlie C.L. WangSpiral and conformal cooling in plastic injection molding[J].Computer-Aided Design, 2015, 63(6):1-11
[36]李月明.基于鼠标的随形冷却注塑模多目标优化目标研究[J].塑料工业, 2016, 44(5):66-70
[37]LI Z, WANG X Y, GU J F, et al.Topology Optimization for the Design of Conformal Cooling System in Thin-wall Injection Molding Based on BEM[J].International Journal of Advanced Manufacturing Technology, 2017, 94(1-4):1041-1059 |
