[1] 谢文谦.石墨烯改性聚四氟乙烯复合材料制备及性能研究[D]. 2016.Xie Wenqian. The preparation of Graphene/PTFE composites and performance research[D]. 2016.[2] 崔小明.工程塑料聚四氟乙烯改性研究进展[J].有机氟工业,2009(3):52-58.Cui Xiaoming. Research Progress on Modification of Engineering Plastics Polytetrafluoroethylene[J]. Organo-Fluorine Industry,2009(3):52-58.[3] 廖立.聚四氟乙烯加工技术、填充改性及应用进展[J].当代化工,2010,39(6):723-725.Liao Li. Advances in Processing Technology, Modification and Application of Polytetrafluoroethylene[J]. Contemporary Chemical Industry, 2010, 39(6):723-725.[4] 沈慧娟.聚四氟乙烯微孔膜的研究进展[J]. 化学工程与装备,2009,(11) .Shen Huijuan. Research progress of PTFE microporous membrane[J]. Chemical Engineering and Equipmen,,2009,(11):111-14+154.[5] 马伟强.玻璃纤维填充改性 PTFE 复合材料的摩擦磨损性能[J].工程塑料应用,2017,(9):33-37.Ma Weiqiang. Friction and Wear Properties of GF Doped PTFE Composites[J]. Engineering plastics application,2017,(9):33-37.[6] Rudresh B M,Kumar B N R. Influence of Experimental Parameters on Friction and Wear Mechanisms of PA66/PTFE Blend Reinforced with Glass Fiber[J].Transactions of the Indian Institute of Metals,2018.[7] 杨杰. GF/PTFE活塞环摩擦磨损规律研究[D].辽宁:大连海事大学,2018.Yang Jie. Study on the Law of Friction and Wear of GF/PTFE Piston Ring [D].Liao Ning,Dalian Maritime University.[8]Li Z,Liu J,Yuan Y,et al. Effects of surface fluoride-functionalizing of glass fiber on the properties of PTFE/glass fiber microwave composites[J]. RSC Adv. 2017,7(37):22810-22817.[9] 杨家义, 杨博峰, 李香, 等.全无油往复压缩机用碳纤维增强聚四氟乙烯密封材料的性能研究[J].流体机械,2017,45(3):6-10. Yang Jiayi,Yang Bofeng,Li Xiang,et al. Study on Properties of Carbon Fiber Reinforced PTFE Sealing Material Applied in Non-lubricated Reciprocating Compressor[J].Fluid Machinery,2017,45(3):6-10.[10] Rudresh B M,Ravi Kumar B N,Madhu D.Combined effect of micro- and nano-fillers on mechanical, thermal, and morphological behavior of glass–carbon PA66/PTFE hybrid nano-composites[J]. Advanced Composites and Hybrid Materials,2019.[11] Wu J,Huang X,Berglund K,et al. CuO nanosheets produced in graphene oxide solution: An excellent anti-wear additive for self-lubricating polymer composites[J]. Composites Science & Technology,2018,162.[12] He R,Chang Q,Huang X,et al.Improved mechanical properties of carbon fiber reinforced PTFE composites by growing graphene oxide on carbon fiber surface[J].Composite Interfaces,2018:1-10.[13] Ronghao L,Keqiang L,Haiyong T,et al.Mechanical properties of plasma-treated carbon fiber reinforced PTFE composites with CNT[J]. Surface and Interface Analysis,2017.[14] 解挺,江凯,丁亚.填料粒径对Cu/PTFE复合材料摩擦学性能影响的数值模拟[J].摩擦学学报,2016,36(1):35-41.Xie Ting, Jiang Kai, Ding Ya.Numerical Simulation of Influence of Filler Size on Tribological Properties of Cu/PTFE Composites[J].Tribology,2016,36(1):35-41.[15]张耀东,李程,姬瑞磊,樊国祥. PTFE复合体系电弧作用机理探讨及电气性能研究[J].湖北电力,2018,42(05):29-33.Zhang Yaodong,Li cheng,Ji Ruilei,et al. Study on Arc Action Mechanism and Electrical Properties of PTFE Composite System[J]. Hubei Electric Power,2018,42(05):29-33.[16] Ying L X,Wang X H,Zhang C J,et al. Effect of PTFE Content on Microstructure and Tribological Properties of Cu-Sn Coating[J]. Advanced Materials Research,2017,1142:173-177.[17] 李朋辉,侯根良,毕松,et al. 二硫化钼改性PTFE摩擦磨损性能[J].塑料工业,2018,46(11):41-44.Li Penghui,Hou Genliang,Bi Song,et al. Friction and Wear Properties of PTFE Composites Filled with MoS2[J]. China Plastics Industry,2018,46(11):41-44.[18] Patare,Prasad M,Lathkar G.S. Optimization of Glass fiber and MoS2,Filled PTFE Composites Using Non Traditional Optimization Techniques[J].Materials Today:Proceedings, 2018,5(2):7310-7319.[19] Patare P M,Lathkar G S.Dry Sliding Wear Performance Optimization of MoS2 Filled PTFE Composites Using Taguchi Approach[C].Techno-Societal 2016,International Conference on Advanced Technologies for Societal Applications.Springer,Cham,2018.[20] 牛永平,韩明,杜三明.纳米氧化铝改性聚四氟乙烯的摩擦磨损性能研究[J].工程塑料应用, 2010(2):59-62.Niu Yongping,Han Ming,Du Sanming.Friction and Wear Properties of PTFE Filled with Nano-Al2O3[J]. Application of Engineering Plastics,2010(2):59-62.[21] Ji R N,Liu C X,Zhang J,et al.Hydrophobicity and tribological properties of Al2O3/PTFE composite coating[J]. Rare Metals,2018. [22] Burris D L,Sawyer W G.Improved wear resistance in alumina-PTFE nanocomposites with regular shaped nanoparticles[J]. Wear,2006,260(7):915-918.[23]张瑶,陈蓉,郭少云.SiO2/聚四氟乙烯复合薄膜的制备及力学性能[J].复合材料学报, 2019(3):624-629.Zhang Yao,Chen Rong,Guo Shaoyun. Preparation and mechanical properties of SiO2/poly tetrafluoroethylene composite films[J].Acta Materiae Compositae Sinica,2019(3):624-629.[24]马伟强,侯根良,苏勋家,et al.纳米SiO2填充改性聚四氟乙烯复合材料的摩擦磨损性能研究[J].塑料工业,2017(5).Ma Weiqiang,Hou Genliang,Su Xunjia, et al.Study on the Friction and Wear Properties of Nano-SiO2 Doped PTFE Composites[J].China Plastics Industry,2017(5).[25] Qu M,Yao Y,He J,et al.Tribological study of polytetrafluoroethylene lubricant additives filled with Cu microparticles or SiO2, nanoparticles[J].Tribology International,2017,110:57-65. [26]Liang Y,Ju J,Deng N,et al.Super-hydrophobic self-cleaning bead-like SiO2 @PTFE nanofiber membranes for waterproof-breathable applications[J].Applied Surface Science,2018,442:54-64.[27]庞晓军,邓畅光,徐丽萍,et al.聚四氟乙烯/Al3O2-TiO2复合涂层的制备及其疏水性能研究[J].表面技术,2017(3).Pang Xiaojun,Deng Changguang,Xu Liping, et al.Preparation of PTFE/Al3O2-TiO2 Composite Coating and Its Hydrophobic Property[J].Surface Technology,2017(3):145-150.