| [1] Ko-Ta Chiang, Fu-Ping Chang. Analysis of shrinkage and warpage in an injection- molded part with a thin shell feature using the response surface methodology[J]. International Journal of Advanced Manufacturing Technology, 2007, 35(5):468-479.[2] Chen C, Chuang M, Hsiao Y, et al. Simulation and experimental study in determining injection molding process parameters for thin-shell plastic parts via design of experiments analysis[J]. Expert Systems with Applications, 2009, 36(7):10752-10759. [3] 吴海宏，赵振峰，黄明. 聚合物注塑内应力和翘曲变形的数值模拟[J]．高分子材料科学与工程, 2007, 23(6):15-19. WU Hai-hong , ZHAO Zhen-feng , HUANG Ming, et al. Numerical Simulation About Internal Stress and Warpage of Injection Molded Polymers[J]. Polymer Materials Science and Engineering, 2007, 23(6):15-19.[4] 白杨，柳和生. 注射成型工艺参数对聚丙烯制品翘曲的影响及机理研究[J]. 中国塑料, 2009, 23(5):76-79. BAI Yang, LIU He-sheng. Effect of Injection Molding Parameters on Warpage of Polypropylene Product and Its Causation[J]. China Plastics, 2009, 23(5):76-79.[5] 孙显俊，苏旭明，毛江辉，等. 复杂几何体注塑制品翘曲变形模拟仿真[J]. 南京航空航天大学学报, 2015, 47(5):752-759. SUN Xian-jun, SU Xu-ming, MAO Jiang-hui, et al. Simulation System Development for Warpage of Injection Molded Part with Complicated Geometry[J]. Journal of Nanjing University of Aeronautics & Astronautics, 2015,47(5):752-759.[6] 江青松，柳和生，熊爱华，等. 纤维增强薄壁注塑件翘曲变形耦合有限元分析[J]. 北京化工大学学报( 自然科学版), 2017, 44(2):103-107. JIANG Qing-song, LIU He-sheng, XIONG Ai-hua, et al. Coupled finite element analysis of the warpage deflection of thin-walled fiber-reinforced injection-molded parts[J]. Journal of Beijing University of Chemical Technology ( Natural Science), 2017, 44(2):103-107.[7] Ogando J. Fight sinks with external gas assist [J]. Plastics Technology, 1998, 44(8):45-46.[8] Chen S C, Lin Y C，Huang S W. Study on the Packing Effects of External Gas-Assisted Injection Molding on Part Shrinkage in Comparison With Conventional Injection Molding[J]. Polymer Engineering and Science, 2010, 50(11):2085-2092.[9] Shih-Chih Nian, Ming-Hung Lib, Ming-Shyan Huang. Warpage control of headlight lampshades fabricated using external gas-assisted injection molding[J]. international Journal of Heat and Mass Transfer, 2015, 86(1):358–368.[10] Guo Z, Ruan X, Peng Y, Li D. Warpage of injection-molded thermoplastics parts: Numerical simulation and experimental validation[J]. Journal of Materials Engineering & Performance, 2002, 11 (11): 138-144. [11] 申长雨, 吴海宏, 赵振峰. 注塑制品内应力计算的非线性黏弹性本构方程[J]. 化工学报, 2007, 58(2): 490-494. SHEN Chang-yu, WU Hai-hong, ZHAO Zhen-feng. Non- linear viscoelastic constitutive equation to calculate internal stress of injection molded articles[J]. Journal of Chemical Industry and Engineering(China), 2007, 58(2):490-494. |
