Study on Factors InfI uencing Clamping Force Repeatability of Injection Molding Machines

doi:10.19491/j.issn.1001-9278.2012.01.018

China Plastics ›› 2012, Vol. 26 ›› Issue (01): 98-102 .DOI: 10.19491/j.issn.1001-9278.2012.01.018

Previous Articles Next Articles

Study on Factors InfI uencing Clamping Force Repeatability of Injection Molding Machines

WANG Xiao-Hua Panpan Zhang Pengcheng Xie Weimin Yang

Received:2011-08-15 Revised:2011-10-24 Online:2012-01-26 Published:2012-01-26

Abstract

Abstract: Charalcteristics of conventional measurerment methods of clamping force repeatability was discussed. Influencing factors on clamping force repeatability were invest igat ed by Baumer strain clamps (Switzerland) . It was found that the influences of variatlons of mold closing/ opening position and speed could be neglected. The test methods of clamping force repeatability based on Baume strain clamps had characteristics of easy operation and high accuracy.

Key words: Injection molding machine, Clamping force, Tie bars, Strain

WANG Xiao-Hua Panpan Zhang Pengcheng Xie Weimin Yang. Study on Factors InfI uencing Clamping Force Repeatability of Injection Molding Machines[J]. China Plastics, 2012, 26(01): 98-102 .

[1]	LI Yan, TANG Xiaoxu, ZHANG Weijie, HUANG Ruipeng, ZHANG Shan. Research progress in evaluation of slow crack growth resistance of polyethylene pipes based on strain hardening modulus [J]. China Plastics, 2022, 36(9): 148-159.
[2]	LEI Jingfa, SHEN Qiang, LIU Tao, SUN Hong, YIN Zhiqiang. Influence of fused deposition process parameters on static and dynamic mechanical properties of thermoplastic polyurethane elastomer [J]. China Plastics, 2022, 36(5): 29-35.
[3]	WEN Yuan, MAO Xianpeng, XU Kejie. Effect of sample thickness on tensile properties of polyethylene [J]. China Plastics, 2022, 36(4): 43-46.
[4]	ZHAO Xingmin, ZHAO Jianping, YAN Jizhong. Study on Constitutive Model for Butt Fusion Welded Joint of High⁃density Polyethylene Pipe [J]. China Plastics, 2021, 35(4): 65-71.
[5]	BI Weifeng, LIU Jiaoshi, CHEN Shaojun, YUAN Hao, ZHANG Yanxia. Effect of Composition Factors on Mechanical Properties of PC/ABS Alloy Exposed to Alkylbenzene [J]. China Plastics, 2021, 35(11): 44-48.
[6]	WANG Zhigang, YANG Bo, WANG Jingran, XU Qingyong, SHEN Yang. Evaluation of Slow Crack Growth Resistance for Polyethylene Pipe Butt-Fusion Welded Joint [J]. China Plastics, 2020, 34(9): 51-55.
[7]	Gang LIU, Nanhong FU, Xiaolong JIAO, Xiyu DOU, Yuxuan XU, Pengcheng XIE. Experimental Investigation on Mold Separation Characteristics of Toggle⁃type Full Electric Injection Molding Machine [J]. China Plastics, 2020, 34(5): 59-62.
[8]	LEI Jingfa, WEI Zhan, LIU Tao , SUN Hong , DUAN Huantian . Dynamic Mechanical Behavior and Dynamic Constitutive Model of Fused Deposition PLA Materials [J]. China Plastics, 2020, 34(11): 59-65.
[9]	YE Bading, LU Chenfeng, CHU Nengkui, SHEN Haibo, LI Binbin, XIE Pengcheng. Research Progress in All⁃Electric Injection Molding Machine and Its Application in Auto Parts Electronic Industry [J]. China Plastics, 2020, 34(10): 94-99.
[10]	. Study on Mechanical Behavior of New Type of High Strength Cables Under Combined Load [J]. China Plastics, 2017, 31(4): 63-69 .
[11]	. Design and Analysis of Clamping-Locking-Ejecting Unit belong to Ultrasonic Micro-injection Molding Machine [J]. China Plastics, 2016, 30(09): 88-92 .
[12]	. Rigidity Analysis of Clamping Systems in Twoplate Injection Molding Machines [J]. China Plastics, 2016, 30(08): 98-102 .
[13]	. Research on the Mechanical Properties and Constitutive Model of High Density Polyethylene Plastics [J]. China Plastics, 2016, 30(04): 88-92 .
[14]	. Design and Analysis of Ultrasonic Units of Ultrasonic Micro-injection Molding Machines [J]. China Plastics, 2016, 30(03): 99-104 .
[15]	. Study on Influencing Factors of Plasticizing Capacity of Injection Molding Machines [J]. China Plastics, 2016, 30(02): 99-103 .

Study on Factors InfI uencing Clamping Force Repeatability of Injection Molding Machines

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments