| [1]Macrae RO，Pask CM，Burdsall LK，Blackburn RS，Rayner CM，McGowan PC.The combined synthesis and coloration of poly(lactic acid)[J].Angew Chem Int Ed, 2011, 50(1):291-294[2] 王建琴, 刘晨光.聚乳酸增韧改性最新研究进展[J]. [J].塑料科技, 2015, 43(06):65-70[3]顾书英，詹 辉，任 杰.聚乳酸共混物的制备及其性能研究[J].中国塑料, 2006, 20(10):39-42[4]Li J，Chen DK，Gui BZ，Gu MH，Ren J.Crystallization morphology and crystallization kinetics of poly(lactic acid)：effect of N-Aminophthalimide as nucleating agent[J].Polymer Bulletin, 2011, 67(5):775-791[5] Zhao P，Liu WQ，Wu QS，Ren J.Preparation，Mechanical，and Thermal Properties of Biodegradable Ployesters/Poly（Lactic Acid）Blends[J].[J].Journal of Nanomaterials, 2010, 2010(1):1-8[6]Bates CM，Seshimo T，Maher MJ，et al.Polarity-switching top coats enable orientation of sub-10-nm block copolymer domains[J].Science, 2012, 338(6108):775-779[7] 汪 昊.聚乳酸复合材料的制备及性能[D]. 华南理工大学, 2013（5）.[8]程伟鹏，张伟阳，张俊超等.扩链对 共混物结构与性能的影响[J].塑料工业, 2015, 43(3):45-50[9]TOKITA N.Analysis of morphology formation in elastomer blend[J][J].Rubber Chem Technol , 1977, 50(3):292-230[10] 张龙斌.无机刚性粒子增韧聚合物研究进展[J].[J].化工新型塑料, 2005, 33(10):25-28[11] 李振中, 李东红，温变英.无机纳米粒子填充改性聚合物的研究进展[J].[J].塑料, 2001, 30(1):44-48[12] 卢 伟, 李雅明, 杨 钢, 李启成, 肖汉文, 叶正涛.聚乳酸(PLA)/己二酸-对苯二甲酸-丁二酯共聚物(PBAT)/乙酰化柠檬酸三丁酯(ATBC)共混物的结晶行为[J]. [J].胶体与聚合物, 2008, 26(02):19-21[13] 冯辉霞.聚乳酸-有机蒙脱土纳米复合材料的制备及结构表征[J].[J].塑料工业, 2009, 37(2):43-46[14] F Carrasco，J Gamez-Perez，O O Santana, et al.Processing of poly(lactic acid)/Organomontmorillonite Nanocomposites：Microstructure，Thermal Stability and Kinetics of the Thermal Decomposition Decomposition[J].[J].Chemical Engineering Journal, 2011, 178(24):451-460[15] Najafi N，Heuzey C M，Carreau J P，et al.Control of Thermal Degradation of Polylactide（PLA）-clay Nanocomposites Useing Chian Extenders[J].[J].Polymer Degradation and Stability, 2012, 97(4):554-565 |
