京ICP备13020181号-2
© 《China Plastics》
© 《China Plastics》
China Plastics ›› 2020, Vol. 34 ›› Issue (11): 41-47.DOI: 10.19491/j.issn.1001-9278.2020.11.008
• Processing and Application • Previous Articles Next Articles
FU Yunsong, WANG Ruohan, LI Ao()
Received:
2020-04-24
Online:
2020-11-26
Published:
2020-11-20
CLC Number:
FU Yunsong, WANG Ruohan, LI Ao. Study on Mixing Effectiveness and Applications of Fuzzy PID Temperature Control System of Intermittent Mixer in Different Environments[J]. China Plastics, 2020, 34(11): 41-47.
ΔKp | 偏差E | |||||||
---|---|---|---|---|---|---|---|---|
NB | NM | NS | Z | PS | PM | PB | ||
偏差率Ec | NB | 8 | 8 | 8 | 5.62 | 5.62 | 3.38 | 0 |
N | 8 | 8 | 5.62 | 3.38 | 3.38 | 0 | 0 | |
Z | 5.62 | 5.62 | 5.62 | 0 | -1.38 | -3.62 | -3.62 | |
P | 0 | -1.38 | -1.38 | -1.38 | -3.62 | -6 | -6 | |
PB | 0 | -1.38 | -1.38 | -3.62 | -3.62 | -6 | -6 |
ΔKp | 偏差E | |||||||
---|---|---|---|---|---|---|---|---|
NB | NM | NS | Z | PS | PM | PB | ||
偏差率Ec | NB | 8 | 8 | 8 | 5.62 | 5.62 | 3.38 | 0 |
N | 8 | 8 | 5.62 | 3.38 | 3.38 | 0 | 0 | |
Z | 5.62 | 5.62 | 5.62 | 0 | -1.38 | -3.62 | -3.62 | |
P | 0 | -1.38 | -1.38 | -1.38 | -3.62 | -6 | -6 | |
PB | 0 | -1.38 | -1.38 | -3.62 | -3.62 | -6 | -6 |
ΔKi | 偏差E | |||||||
---|---|---|---|---|---|---|---|---|
NB | NM | NS | Z | PS | PM | PB | ||
偏差率Ec | NB | -0.004 | -0.004 | -0.002 64 | -0.002 64 | -0.001 36 | -0.001 36 | 0 |
N | -0.002 64 | -0.004 | -0.001 36 | -0.001 36 | -0.001 36 | 0 | 0 | |
Z | -0.002 64 | -0.002 64 | 0.001 36 | 0.002 64 | 0.001 36 | 0.002 64 | 0.002 64 | |
P | 0 | 0 | 0.001 36 | 0.002 64 | 0.002 64 | 0.004 | 0.004 | |
PB | 0 | 0 | 0.001 36 | 0.001 36 | 0.002 64 | 0.004 | 0.004 |
ΔKi | 偏差E | |||||||
---|---|---|---|---|---|---|---|---|
NB | NM | NS | Z | PS | PM | PB | ||
偏差率Ec | NB | -0.004 | -0.004 | -0.002 64 | -0.002 64 | -0.001 36 | -0.001 36 | 0 |
N | -0.002 64 | -0.004 | -0.001 36 | -0.001 36 | -0.001 36 | 0 | 0 | |
Z | -0.002 64 | -0.002 64 | 0.001 36 | 0.002 64 | 0.001 36 | 0.002 64 | 0.002 64 | |
P | 0 | 0 | 0.001 36 | 0.002 64 | 0.002 64 | 0.004 | 0.004 | |
PB | 0 | 0 | 0.001 36 | 0.001 36 | 0.002 64 | 0.004 | 0.004 |
ΔKd | 偏差E | |||||||
---|---|---|---|---|---|---|---|---|
NB | NM | NS | Z | PS | PM | PB | ||
偏差率Ec | NB | -13.6 | -13.6 | 0 | 13.6 | 13.6 | 40 | -26.4 |
N | -26.4 | -13.6 | 13.6 | 26.4 | -13.6 | 13.6 | -13.6 | |
Z | -26.4 | 0 | 26.4 | 40 | 26.4 | 0 | -26.4 | |
P | -26.4 | 0 | 13.6 | 26.4 | -13.6 | 13.6 | -26.4 | |
PB | -40 | -13.6 | 0 | 13.6 | -13.6 | 40 | -40 |
ΔKd | 偏差E | |||||||
---|---|---|---|---|---|---|---|---|
NB | NM | NS | Z | PS | PM | PB | ||
偏差率Ec | NB | -13.6 | -13.6 | 0 | 13.6 | 13.6 | 40 | -26.4 |
N | -26.4 | -13.6 | 13.6 | 26.4 | -13.6 | 13.6 | -13.6 | |
Z | -26.4 | 0 | 26.4 | 40 | 26.4 | 0 | -26.4 | |
P | -26.4 | 0 | 13.6 | 26.4 | -13.6 | 13.6 | -26.4 | |
PB | -40 | -13.6 | 0 | 13.6 | -13.6 | 40 | -40 |
实验序号 | L* | a* | b* | ΔE* | |
---|---|---|---|---|---|
密闭环境(PID) | 1 | 40.25 | 27.52 | 28.21 | 0.752 |
2 | 40.71 | 26.85 | 28.02 | 0.720 | |
3 | 40.07 | 27.21 | 27.85 | 0.732 | |
标准差 | 0.330 | 0.335 | 0.180 | 0.016 | |
通风环境(PID) | 4 | 40.05 | 26.56 | 27.55 | 0.772 |
5 | 40.45 | 26.38 | 27.79 | 0.782 | |
6 | 39.83 | 26.15 | 27.04 | 0.751 | |
标准差 | 0.314 | 0.206 | 0.383 | 0.016 |
实验序号 | L* | a* | b* | ΔE* | |
---|---|---|---|---|---|
密闭环境(PID) | 1 | 40.25 | 27.52 | 28.21 | 0.752 |
2 | 40.71 | 26.85 | 28.02 | 0.720 | |
3 | 40.07 | 27.21 | 27.85 | 0.732 | |
标准差 | 0.330 | 0.335 | 0.180 | 0.016 | |
通风环境(PID) | 4 | 40.05 | 26.56 | 27.55 | 0.772 |
5 | 40.45 | 26.38 | 27.79 | 0.782 | |
6 | 39.83 | 26.15 | 27.04 | 0.751 | |
标准差 | 0.314 | 0.206 | 0.383 | 0.016 |
实验序号 | L* | a* | b* | ΔE* | |
---|---|---|---|---|---|
密闭环境(模糊PID) | 1 | 40.05 | 26.88 | 28.20 | 0.768 |
2 | 40.25 | 26.80 | 27.95 | 0.745 | |
3 | 40.18 | 26.98 | 28.11 | 0.751 | |
标准差 | 0.101 | 0.090 | 0.127 | 0.012 | |
通风环境(模糊PID) | 4 | 40.35 | 26.52 | 27.81 | 0.760 |
5 | 40.51 | 26.40 | 27.60 | 0.752 | |
6 | 40.36 | 26.37 | 27.68 | 0.746 | |
标准差 | 0.090 | 0.079 | 0.106 | 0.007 |
实验序号 | L* | a* | b* | ΔE* | |
---|---|---|---|---|---|
密闭环境(模糊PID) | 1 | 40.05 | 26.88 | 28.20 | 0.768 |
2 | 40.25 | 26.80 | 27.95 | 0.745 | |
3 | 40.18 | 26.98 | 28.11 | 0.751 | |
标准差 | 0.101 | 0.090 | 0.127 | 0.012 | |
通风环境(模糊PID) | 4 | 40.35 | 26.52 | 27.81 | 0.760 |
5 | 40.51 | 26.40 | 27.60 | 0.752 | |
6 | 40.36 | 26.37 | 27.68 | 0.746 | |
标准差 | 0.090 | 0.079 | 0.106 | 0.007 |
1 | 李青寰,毕 超.间歇式混合器混合性能研究及混合性能评价指标体系构建[J].橡塑技术与装备,2016,42(22):7⁃11. |
LI Q H,BI C. Investigation of Batch Mixer's Mixing Performance and the Construction of Evaluation System of Mixing Performance[J]. China Rubber/Plastics Technology and Equipment,2016,42(22):7⁃11. | |
2 | 郝少杰,方康玲.基于模糊PID参数自整定的温度控制系统的研究[J].现代电子技术,2011,34(7):196⁃198+204. |
HAO S J,FANG K L. Research of Temperature Control System Based on Parameter Self⁃Tuning of Fuzzy PID[J]. Modern Electronics Technique,2011,34(7):196⁃198+204. | |
3 | 蔡春波.PID参数自整定算法研究及应用[D].哈尔滨:哈尔滨工业大学,2005. |
4 | 李国帅.基于模糊PID的橡胶挤出机温控系统研究[D].青岛:青岛科技大学,2014. |
5 | WANG Y Z, ZHANG R D. Improved Fuzzy PID Controller Design Using Predictive Functional Control Structure [J]. ISA Transactions,2017,71(2):354⁃363. |
6 | 杨桂府,杨 扬.基于PLC的塑料挤出机温度控制系统设计[J].塑料科技,2019, 47(3): 88⁃90. |
YANG G F,YANG Y. Design of Temperature Control System for Plastic Extruder Based on PLC[J]. Plastics Science and Technology,2019, 47(3): 88⁃90. | |
7 | 胡 娜,李 翱,付云松,等.基于BP神经网络的颜料分散性能预测研究[J].中国塑料,2019,33(8):69⁃75. |
HU N,LI A,FU Y S,et al. Study on Dispersion Performance Prediction of Pigment Based on BP Neural Network[J]. China Plastics,2019,33(8):69⁃75. | |
8 | TONG R M. A Control Engineering Review of Fuzzy Systems [J]. Automatica, 1997,13(6):559⁃569. |
9 | KING P J, MAMDANI E H. The Application of Fuzzy Control Systems to Industrial Processes. Automatica,1997,13(3):235⁃242. |
[1] | 张维合 allenzhang. Design of Large Precision Injection Molds with Complex Side Core Pulling Mechanisms for Feeding Frames of Printers [J]. China Plastics, 2018, 32(03): 133-137. |
[2] | . Study on Temperature Field of Blown Film Process for PLA and PE-LD in Certain Temperature Control System [J]. China Plastics, 2017, 31(5): 46-51 . |
[3] | . Design of Stacked-hot-runner-type Injection Molds for Outlet Joints of Cylinder Heads [J]. China Plastics, 2017, 31(5): 103-108 . |
[4] | . Design of Heating System of Outside Mold Decoration of Automobile Dashboards [J]. China Plastics, 2017, 31(1): 105-109 . |
[5] | DU Qiao-lian. Design and Investigation on Intelligent PID Based Temperature Control Systems for Extruders [J]. China Plastics, 2008, 22(1): 86-89 . |
Viewed | ||||||||||||||||||||||||||||||||||||||||||||||||||
Full text 713
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||
Abstract 533
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||